AZ parting 70 suburban - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6772king · 02-07-2013, 08:21 PM

how much for the rear wheel wells??

oilyrag80 · 02-07-2013, 08:36 PM

Quote:

Originally Posted by cooter

I need the part for the body that the tailgate bolts to.

sorry that got cut in half and scaped dident think anybody would need it

Quote:

Originally Posted by 5150

Do you still have the interior panels?

I just need the third door panel.

Shipped to 37188
Posted via Mobile Device

not sure if i want to break up the set let me think on it

Quote:

Originally Posted by silvara

do you still have the hatch for the suburban?? if you do can i see me more pictures because i need one...

The hatch was very rusty it went to scrap

Quote:

Originally Posted by 6772king

how much for the rear wheel wells??

sorry they sold with the rear quarters

Walleye · 02-08-2013, 09:08 AM

Interested in the rear seat arm rest rods/brackets. Shipping to 36066. Thanks.

oilyrag80 · 02-08-2013, 08:36 PM

I have that stuff for the middle seat if thats what your looking for

Walleye · 02-08-2013, 09:02 PM

Affirm...middle seat. Thanks.

**southern parts** · 02-08-2013, 09:16 PM

any rips or gouges in the interier panels ?

**68Custom** · 02-14-2013, 04:44 PM

What exhaust manifolds are on the engine? If ram horn are they still available and price? Thanks!

Aaron

72blazer_mud_bogger · 02-16-2013, 08:59 PM

how are the rocker boxs

oilyrag80 · 02-16-2013, 09:59 PM

Quote:

Originally Posted by 68Custom

What exhaust manifolds are on the engine? If ram horn are they still available and price? Thanks!

Aaron

yes they are ram horns but they have smog ports id sell them for
$30 plus shipping
Thanks

oilyrag80 · 02-16-2013, 09:59 PM

Quote:

Originally Posted by 72blazer_mud_bogger

how are the rocker boxs

dont only blazers have rocker boxes?

UP GRADE · 02-17-2013, 02:37 PM

Do you have the fuel sending unit if so how much to ship to 38109
Posted via Mobile Device

**68Custom** · 02-17-2013, 02:48 PM

Quote:

Originally Posted by oilyrag80

yes they are ram horns but they have smog ports id sell them for
$30 plus shipping
Thanks

I'm interested in these, could you post some pics? And shipping to 66502, thanks!

Aaron

**D.PASSMORE** · 02-17-2013, 05:14 PM

I need a straight single belt power steering (short-sbc) pulley and hardware that attaches it to shaft - nut, washer and key. Plus the nut and washer that hold pitman arm on - 2WD power steering gear. LMK, Thanks

decodan · 02-19-2013, 05:51 PM

I'll take the second seat if available. All brackets too, right. Let me payment details if available. Thanks, Dan

oilyrag80 · 02-21-2013, 08:14 PM

Quote:

Originally Posted by UP GRADE

Do you have the fuel sending unit if so how much to ship to 38109
Posted via Mobile Device

sorry it sold with the tank
Thanks

oilyrag80 · 02-21-2013, 08:32 PM

Quote:

Originally Posted by 68Custom

I'm interested in these, could you post some pics? And shipping to 66502, thanks!

Aaron

Here are some pics they look to be in great shape studs and holes look good
lets just call it 50 bucks shipped

Quote:

Originally Posted by D.PASSMORE

I need a straight single belt power steering (short-sbc) pulley and hardware that attaches it to shaft - nut, washer and key. Plus the nut and washer that hold pitman arm on - 2WD power steering gear. LMK, Thanks

The only thing I have left is the nut and washer for the steering box if you need it ill send it to you no charge. Just pm me your address

Quote:

Originally Posted by decodan

I'll take the second seat if available. All brackets too, right. Let me payment details if available. Thanks, Dan

I traded the seat to a guy locally but I kept the mouting brackets and hold downs if that can help let me know and we can figure out a price
Thanks,James

decodan · 02-22-2013, 12:30 AM

Let me know price including shipping to 63748. Also, how payment is to be made. Thanks, Dan

oilyrag80 · 02-24-2013, 08:53 PM

Quote:

Originally Posted by decodan

Let me know price including shipping to 63748. Also, how payment is to be made. Thanks, Dan

this is everthing I have left from the seat
I can do $75 shipped
Thanks,James

oilyrag80 · 02-24-2013, 08:54 PM

sorry forgot the pic

bondo510 · 07-18-2013, 06:20 PM

I am looking for a radio section , Also did the brake booster mater , rod set up sell? Thanks

oilyrag80 · 07-18-2013, 09:14 PM

Quote:

Originally Posted by bondo510

I am looking for a radio section , Also did the brake booster mater , rod set up sell? Thanks

I have a dash repair section and a booster set up off the blazer i'm parting
ill post a pic soon thanks

oilyrag80 · 07-18-2013, 09:45 PM

Quote:

Originally Posted by bondo510

I am looking for a radio section , Also did the brake booster mater , rod set up sell? Thanks

here is a pic if this is what your looking for let me know
$110 shipped

**chewysask** · 07-18-2013, 09:57 PM

Do you have the rear seat seatbelt brackets?

02-07-2013, 08:21 PM	#76
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: parting 70 suburban how much for the rear wheel wells?? __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

02-08-2013, 09:08 AM	#78
Walleye Registered User Join Date: Feb 2012 Location: Yorktown, VA Posts: 59	Re: parting 70 suburban Interested in the rear seat arm rest rods/brackets. Shipping to 36066. Thanks.

02-08-2013, 08:36 PM	#79
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: parting 70 suburban I have that stuff for the middle seat if thats what your looking for

02-08-2013, 09:02 PM	#80
Walleye Registered User Join Date: Feb 2012 Location: Yorktown, VA Posts: 59	Re: parting 70 suburban Affirm...middle seat. Thanks.

02-08-2013, 09:16 PM	#81
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 70 suburban any rips or gouges in the interier panels ?

02-14-2013, 04:44 PM	#82
68Custom Hammer On! Join Date: Jul 2001 Location: Olathe, KS Posts: 473	Re: parting 70 suburban What exhaust manifolds are on the engine? If ram horn are they still available and price? Thanks! Aaron __________________ 1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed

02-16-2013, 08:59 PM	#83
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: parting 70 suburban how are the rocker boxs

02-17-2013, 02:37 PM	#86
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: parting 70 suburban Do you have the fuel sending unit if so how much to ship to 38109 Posted via Mobile Device

02-17-2013, 05:14 PM	#88
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: parting 70 suburban I need a straight single belt power steering (short-sbc) pulley and hardware that attaches it to shaft - nut, washer and key. Plus the nut and washer that hold pitman arm on - 2WD power steering gear. LMK, Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

02-19-2013, 05:51 PM	#89
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: parting 70 suburban I'll take the second seat if available. All brackets too, right. Let me payment details if available. Thanks, Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

02-22-2013, 12:30 AM	#92
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: parting 70 suburban Let me know price including shipping to 63748. Also, how payment is to be made. Thanks, Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

02-24-2013, 08:54 PM	#94
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: parting 70 suburban sorry forgot the pic Attached Images

07-18-2013, 06:20 PM	#95
bondo510 Registered User Join Date: Jun 2011 Location: Sonora CA Posts: 238	Re: parting 70 suburban I am looking for a radio section , Also did the brake booster mater , rod set up sell? Thanks

07-18-2013, 09:57 PM	#98
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: parting 70 suburban Do you have the rear seat seatbelt brackets?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.