hood question? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lasher78 · 07-13-2013, 12:53 PM

found this in junkyard love this style hood this truck is a flat bed dually...will rhis hood fit on my '66 c10 as a direct bolt on?
Posted via Mobile Device

McCoyAZ · 07-13-2013, 01:15 PM

Yes it will BUT you might need to change the locking pin that is currently on your truck.....be sure to get the hinges, springs, latch and locking pin if you do it.

That is a 1960 Chevy hood....the 61 had the cross bar inserts.

61_FL_Apache · 07-13-2013, 01:26 PM

Yep!

lasher78 · 07-13-2013, 01:27 PM

Quote:

Originally Posted by McCoyAZ

Yes it will BUT you might need to change the locking pin that is currently on your truck.....be sure to get the hinges, springs, latch and locking pin if you do it.

That is a 1960 Chevy hood....the 61 had the cross bar inserts.

by locking pin you mean the little spike looking thing attached in front of radiator? a
Posted via Mobile Device

McCoyAZ · 07-13-2013, 01:32 PM

Quote:

Originally Posted by lasher78

by locking pin you mean the little spike looking thing attached in front of radiator? a
Posted via Mobile Device

yes

lasher78 · 07-13-2013, 09:49 PM

also found this truck today, both have front bumpers on them. will either of those also work on my 66?
Posted via Mobile Device

McCoyAZ · 07-13-2013, 10:00 PM

Measure the space between the mounting holes....I think they are the same but I am not positive about that.

lasher78 · 07-13-2013, 10:47 PM

Quote:

Originally Posted by McCoyAZ

Measure the space between the mounting holes....I think they are the same but I am not positive about that.

ok thank you..
Posted via Mobile Device

lasher78 · 07-13-2013, 10:57 PM

Quote:

Originally Posted by McCoyAZ

Measure the space between the mounting holes....I think they are the same but I am not positive about that.

maybe you can answer another question as it seem you have same style truck as me. how are the outer bed sills ( i guess that is what they are called ) attached , refer to photo. i see this one bolt on each side toward tailgate, but that is the only one, the rest of way up is solid cant move it but no bolts..
Posted via Mobile Device

Doktor Hug · 07-13-2013, 11:39 PM

I have a 60 hood on my 65. No issues whatsoever.

robber grin · 07-14-2013, 07:31 AM

Quote:

Originally Posted by lasher78

maybe you can answer another question as it seem you have same style truck as me. how are the outer bed sills ( i guess that is what they are called ) attached , refer to photo. i see this one bolt on each side toward tailgate, but that is the only one, the rest of way up is solid cant move it but no bolts..
Posted via Mobile Device

Lots of spot welds from the factory.

YES on hood and looks like a 63 long fleet side so bumpers should work too.
rg

**argonaut** · 07-14-2013, 11:20 AM

Bumper from 63-66 will bolt on. 60-62 had a wider frame so the hole locations wouldnt match your 66.
Posted via Mobile Device

lasher78 · 07-14-2013, 12:22 PM

Quote:

Originally Posted by robber grin

Lots of spot welds from the factory.

YES on hood and looks like a 63 long fleet side so bumpers should work too.
rg

o great....so that means alot of beating and breaking and grinding and of coarse cussing just to put in new strips for wood. why cant anything just be easy

Posted via Mobile Device

kieth · 07-15-2013, 02:15 PM

If you are not interested in that hood, and it is in good shape, I might like to try and buy it. PM me if it is still available (60 hood)

Thanks, Kieth

lasher78 · 07-15-2013, 03:20 PM

Quote:

Originally Posted by kieth

If you are not interested in that hood, and it is in good shape, I might like to try and buy it. PM me if it is still available (60 hood)

Thanks, Kieth

im supposed to get it this weekend...but i will let you know if anything changes
Posted via Mobile Device

Vernski · 07-16-2013, 06:01 AM

This might be of interest to you guys..Vernski

http://www.6066gmcguy.org/Hood.htm

lasher78 · 07-18-2013, 03:12 PM

what size bolts hold the front bumper on our '66s. mine doesnt have one and i want to go back to junkyard and get one just want to take right size tool with me...thanks
Posted via Mobile Device

gofastnut · 07-18-2013, 03:35 PM

Adjustable!

Seriously though, I'll look when I get home, but there will probably be 20 answers by then!

Vernski · 07-18-2013, 04:07 PM

Quote:

Originally Posted by lasher78

what size bolts hold the front bumper on our '66s. mine doesnt have one and i want to go back to junkyard and get one just want to take right size tool with me...thanks
Posted via Mobile Device

Take a 3/4" wrench and socket with you + some penetrating oil, + breaker bar w/ 3/4"socket it saves the knuckles

..Vernski

**bhc41051** · 07-18-2013, 04:36 PM

Lasher I'd snag the passenger (and driver if it's there) short arm mirror bracket off the 63. OEM brackets are getting harder to find.

lasher78 · 07-18-2013, 05:48 PM

Quote:

Originally Posted by bhc41051

Lasher I'd snag the passenger (and driver if it's there) short arm mirror bracket off the 63. OEM brackets are getting harder to find.

i think it only has the one but ill get it thanks for tip.
Posted via Mobile Device

lasher78 · 07-18-2013, 05:50 PM

Quote:

Originally Posted by Vernski

Take a 3/4" wrench and socket with you + some penetrating oil, + breaker bar w/ 3/4"socket it saves the knuckles

..Vernski

thanks for size info...as it is almost sitting on ground im sure im going to have fun getting it off

Posted via Mobile Device

lasher78 · 07-19-2013, 06:32 PM

junk yards in lower missouri suck..only one around that even has the one truck and go over during thier operating hours and low and behold they are closed at 330 in afternoon..sfter a forty mile drive. all other yards have already crushed our beloved trucks. anyone know of any yards in lower missouri that still have em?
Posted via Mobile Device

07-13-2013, 12:53 PM	#1
lasher78 Registered User Join Date: Jun 2013 Location: harviell, mo Posts: 246	hood question? found this in junkyard love this style hood this truck is a flat bed dually...will rhis hood fit on my '66 c10 as a direct bolt on? Posted via Mobile Device Attached Images __________________ live like you are dying

07-13-2013, 01:15 PM	#2
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	Re: hood question? Yes it will BUT you might need to change the locking pin that is currently on your truck.....be sure to get the hinges, springs, latch and locking pin if you do it. That is a 1960 Chevy hood....the 61 had the cross bar inserts. __________________ http://s994.photobucket.com/albums/af62/ScottAz2/

07-13-2013, 01:26 PM	#3
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: hood question? Yep! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

07-13-2013, 09:49 PM	#6
lasher78 Registered User Join Date: Jun 2013 Location: harviell, mo Posts: 246	Re: hood question? also found this truck today, both have front bumpers on them. will either of those also work on my 66? Posted via Mobile Device Attached Images __________________ live like you are dying

07-13-2013, 10:00 PM	#7
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	Re: hood question? Measure the space between the mounting holes....I think they are the same but I am not positive about that. __________________ http://s994.photobucket.com/albums/af62/ScottAz2/

07-13-2013, 11:39 PM	#10
Doktor Hug Registered User Join Date: Aug 2011 Location: omaha, ne Posts: 7	Re: hood question? I have a 60 hood on my 65. No issues whatsoever.

07-14-2013, 11:20 AM	#12
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: hood question? Bumper from 63-66 will bolt on. 60-62 had a wider frame so the hole locations wouldnt match your 66. Posted via Mobile Device __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

07-15-2013, 02:15 PM	#14
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: hood question? If you are not interested in that hood, and it is in good shape, I might like to try and buy it. PM me if it is still available (60 hood) Thanks, Kieth

07-16-2013, 06:01 AM	#16
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: hood question? This might be of interest to you guys..Vernski http://www.6066gmcguy.org/Hood.htm

07-18-2013, 03:12 PM	#17
lasher78 Registered User Join Date: Jun 2013 Location: harviell, mo Posts: 246	Re: hood question? what size bolts hold the front bumper on our '66s. mine doesnt have one and i want to go back to junkyard and get one just want to take right size tool with me...thanks Posted via Mobile Device __________________ live like you are dying

07-18-2013, 03:35 PM	#18
gofastnut Registered User Join Date: Feb 2011 Location: Williams, CA Posts: 760	Re: hood question? Adjustable! Seriously though, I'll look when I get home, but there will probably be 20 answers by then! __________________ Jeff 96 C3500 Crew Cab Long bed (Waiting on Cool Name) 64 C-10 shortie stepside, "Ole Brownie" C-10 Club My achingly slow build: http://67-72chevytrucks.com/vboard/s...d.php?t=508345

07-18-2013, 04:36 PM	#20
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: hood question? Lasher I'd snag the passenger (and driver if it's there) short arm mirror bracket off the 63. OEM brackets are getting harder to find.

07-19-2013, 06:32 PM	#23
lasher78 Registered User Join Date: Jun 2013 Location: harviell, mo Posts: 246	Re: hood question? junk yards in lower missouri suck..only one around that even has the one truck and go over during thier operating hours and low and behold they are closed at 330 in afternoon..sfter a forty mile drive. all other yards have already crushed our beloved trucks. anyone know of any yards in lower missouri that still have em? Posted via Mobile Device __________________ live like you are dying



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.