Heater box screws and exhaust question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72chevyfleet · 07-21-2013, 01:04 AM

First off I replaced my heater core and the box was missing some of the small screws that I believe are 5/16" does anyone sell those? or do I have to buy them at a hardware store?
Secondly I have a set of summit racing headers on my 350 and the collectors dump out at an angle and so my exhaust right now looks horrid and im tired of seeing how low it hangs everytime I walk to it in a parking lot I was wondering if I was the only one with this issue and what a good fix would be? Thanks!

bonnieclyde100 · 07-21-2013, 08:22 AM

check lmc truck they sell alot of that stuff

72chevyfleet · 07-21-2013, 01:53 PM

I had checked all the major companies Like LMC Brothers classic parts and some other ones but no one carries the screws that put the box together

07-21-2013, 01:04 AM	#1
72chevyfleet Learning As I Go Join Date: Feb 2009 Location: scotts valley california Posts: 250	Heater box screws and exhaust question First off I replaced my heater core and the box was missing some of the small screws that I believe are 5/16" does anyone sell those? or do I have to buy them at a hardware store? Secondly I have a set of summit racing headers on my 350 and the collectors dump out at an angle and so my exhaust right now looks horrid and im tired of seeing how low it hangs everytime I walk to it in a parking lot I was wondering if I was the only one with this issue and what a good fix would be? Thanks! __________________ 1972 Chevy C-20 Longbed 2wd Granny Low with a Crate 350: Air Gap Manifold, Edelbrock 600cfm, HEI, Headers to a 40 series flow (soon to be dual again)

07-21-2013, 08:22 AM	#2
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Heater box screws and exhaust question check lmc truck they sell alot of that stuff

07-21-2013, 01:53 PM	#3
72chevyfleet Learning As I Go Join Date: Feb 2009 Location: scotts valley california Posts: 250	Re: Heater box screws and exhaust question I had checked all the major companies Like LMC Brothers classic parts and some other ones but no one carries the screws that put the box together __________________ 1972 Chevy C-20 Longbed 2wd Granny Low with a Crate 350: Air Gap Manifold, Edelbrock 600cfm, HEI, Headers to a 40 series flow (soon to be dual again)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.