1970 4X4 drive shaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Beau Flecks · 11-21-2003, 02:20 PM

Does anyone know the exact specs on a drive shaft for a 1970 4X4 longbed 1/2 ton or does anyone have one that I can purchase.

69k5 · 11-21-2003, 05:12 PM

weighs a ton. i want to say its 64 1/2 inches long slip not extended. ill check for you when i get home. this was on a 72 3/4 ton i had. the one i have is 5 or 6 inches in diameter. dont know if this helps at all since mines 3/4.

69k5

**CPNE** · 11-21-2003, 05:56 PM

1/2 and 3/4 on are the same except for ujoints. You can used them interchangeably if you buy "hybrid" ujoints.

Beau Flecks · 11-22-2003, 05:18 PM

The specs I got from my local GM dealer said it was 49 13/16 inches long and 3 /12 inches in diameter. I didn't know if this was correct or not.

Beau Flecks · 12-01-2003, 11:43 AM

Does anyone else have any information?

11-21-2003, 02:20 PM	#1
Beau Flecks Registered User Join Date: Sep 2003 Location: Jefferson City, Missouri Posts: 9	1970 4X4 drive shaft Does anyone know the exact specs on a drive shaft for a 1970 4X4 longbed 1/2 ton or does anyone have one that I can purchase.

11-21-2003, 05:56 PM	#3
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	1/2 and 3/4 on are the same except for ujoints. You can used them interchangeably if you buy "hybrid" ujoints. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

11-21-2003, 05:12 PM	#2
69k5 Registered User Join Date: Nov 2003 Location: Monroe, La 71202 Posts: 317	weighs a ton. i want to say its 64 1/2 inches long slip not extended. ill check for you when i get home. this was on a 72 3/4 ton i had. the one i have is 5 or 6 inches in diameter. dont know if this helps at all since mines 3/4. 69k5

11-22-2003, 05:18 PM	#4
Beau Flecks Registered User Join Date: Sep 2003 Location: Jefferson City, Missouri Posts: 9	The specs I got from my local GM dealer said it was 49 13/16 inches long and 3 /12 inches in diameter. I didn't know if this was correct or not.

12-01-2003, 11:43 AM	#5
Beau Flecks Registered User Join Date: Sep 2003 Location: Jefferson City, Missouri Posts: 9	Does anyone else have any information?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.