Plans/parts list for cross-over steering, anybody? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trukman1 · 07-22-2013, 06:56 PM

Does anyone have the plans and part numbers for building cross-over set-up for Dana 60? Have a machinist friend but not sure of prints for steering parts and also need numbers for tie-rods, etc. Will use DOM tubing if I can figure lengths and additional parts needed. Thanks guys!

Mr. 250r · 07-22-2013, 07:18 PM

Couldn't you just buy a kit? I mean i understand saving money or something but i don't think i've ever even seen a blue print of the steering arms but here's one piece if it helps

http://www.ballisticfabrication.com/...es_p_1246.html

Click on the other pictures and you will see a measured print of the arm i guess you can pick the thickness

Good luck on it

Chevy1TonFun · 07-22-2013, 09:24 PM

I used the Ballistic Fab steering arms. I bought 3/4" Helm Joints and DOM tubing. You'll need a 2wd steering box and a TJ pitman arm. Thats it in a nut shell.

**argonaut** · 07-23-2013, 11:12 AM

I agree with chevy1tonfun. You can put a kit together pretty cost effectively if you shop around. Plus you can get the steering arms that fit your specific needs. For instance if you have arched, lifted leaf springs you might need a taller steering arm to clear them. Also a jeep SJ arm has less drop and is longer than the TJ arm which in my case was preferred.
Posted via Mobile Device

**kwmech** · 07-23-2013, 12:15 PM

www.partsmike.com

**argonaut** · 07-23-2013, 07:11 PM

Yup! Partsmike had good prices and customer service when I bought parts from them for my D44 crossover + high steer conversion.
Posted via Mobile Device

boonedogs72 · 07-23-2013, 10:38 PM

I have brand new ballistic crossover arm and spring elim blocks for drivers side with studs 180 bucks shipped to your door.
Posted via Mobile Device

07-22-2013, 06:56 PM	#1
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Plans/parts list for cross-over steering, anybody? Does anyone have the plans and part numbers for building cross-over set-up for Dana 60? Have a machinist friend but not sure of prints for steering parts and also need numbers for tie-rods, etc. Will use DOM tubing if I can figure lengths and additional parts needed. Thanks guys! __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

07-22-2013, 07:18 PM	#2
Mr. 250r Registered User Join Date: Dec 2010 Location: freeburg, illinois Posts: 885	Re: Plans/parts list for cross-over steering, anybody? Couldn't you just buy a kit? I mean i understand saving money or something but i don't think i've ever even seen a blue print of the steering arms but here's one piece if it helps http://www.ballisticfabrication.com/...es_p_1246.html Click on the other pictures and you will see a measured print of the arm i guess you can pick the thickness Good luck on it __________________ 1987 Chevy V30 - http://67-72chevytrucks.com/vboard/s...d.php?t=573854 1988 IROC-Z Camaro - 305/T5 T-Top 1989 GMC V35 - Marbolo Express http://67-72chevytrucks.com/vboard/s...d.php?t=596850 1991 V2500 Suburban Silverado - Sold 1991 V2500 Suburban Scottsdale - Big Nasty http://67-72chevytrucks.com/vboard/s...d.php?t=497423 2001 Ram 3500 5.9 H.O NV56 EC DRW - Sold 2003 1500 Silverado 2004 Ram 3500 5.9 H.O NV56 CC DRW - Sold 2005 Silverado 2500HD 6.6/ZF6 CC LWB

07-22-2013, 09:24 PM	#3
Chevy1TonFun Grease Monkey Join Date: Oct 2007 Location: Fresno CA Posts: 750	Re: Plans/parts list for cross-over steering, anybody? I used the Ballistic Fab steering arms. I bought 3/4" Helm Joints and DOM tubing. You'll need a 2wd steering box and a TJ pitman arm. Thats it in a nut shell. __________________ Tow Rig: 2012 Chevy 2500HD CCSB LTZ Z71 4x4 Duramax Ultimate Offroad Build: 1978 Chevy Silverado K30 Crewcab Build Link http://67-72chevytrucks.com/vboard/s...d.php?t=654053 Mud Truck: 1972 Chevy Cheyenne K30 4x4, 468/400/205, D60/D70HD, 18" Custom Lift, 17x39" IROKs FOR SALE http://67-72chevytrucks.com/vboard/c...ton-4x4&cat=12

07-23-2013, 11:12 AM	#4
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Plans/parts list for cross-over steering, anybody? I agree with chevy1tonfun. You can put a kit together pretty cost effectively if you shop around. Plus you can get the steering arms that fit your specific needs. For instance if you have arched, lifted leaf springs you might need a taller steering arm to clear them. Also a jeep SJ arm has less drop and is longer than the TJ arm which in my case was preferred. Posted via Mobile Device __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

07-23-2013, 12:15 PM	#5
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,713	Re: Plans/parts list for cross-over steering, anybody? www.partsmike.com

07-23-2013, 07:11 PM	#6
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Plans/parts list for cross-over steering, anybody? Yup! Partsmike had good prices and customer service when I bought parts from them for my D44 crossover + high steer conversion. Posted via Mobile Device __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

07-23-2013, 10:38 PM	#7
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: Plans/parts list for cross-over steering, anybody? I have brand new ballistic crossover arm and spring elim blocks for drivers side with studs 180 bucks shipped to your door. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.