Need Some Help Finding Correct Interior Parts!

[SS Tim]

Originally Posted by NC_John

That is a bunch of information there- take a look at the pic though- its a basic cloth seat, cloth on the seating surfaces, vinyl everywhere else. I have no reason to think its not the original or that its been recovered at any point (I actually pulled it out of the truck tonight)- I'm hoping my build sheet is in there somewhere.....

The Z62 code is correct for my truck but the seat is specifically listed as RPO 607 (Blue Custom Cloth Trim).

thanks for the info!

Well I am telling you, still, that is a replacement cover. It was installed sometime in the past 40 years. The cloth was often sold as pre-pleated bulk and it was pretty easy to sew up plain covers like this for customers cheaply. Many aftermarket suppliers offered similar covers over the years. The big giveaway is the fact the cloth goes to the edge of the seat. If you look at the factory picture I provided or this 71 Suburban interior attached you will see the cloth and vinyl mixture and the center vinyl panel with the debossed scroll work. You are correct in that Z62 is the RPO code for the Custom Comfort and Appearance equipment. This included a number of things like the bright trim and the cloth/vinyl seat cover. In addition it bumped the fender emblems from the base C/10 to Custom/10 in this case. The 607 is the production code for that specific Z62 type and color seat cover. The exterior color appears to be the 501 medium blue poly unless you have one of the two-tone combinations.

[NC_John]

Originally Posted by SS Tim

Well I am telling you, still, that is a replacement cover. It was installed sometime in the past 40 years. The cloth was often sold as pre-pleated bulk and it was pretty easy to sew up plain covers like this for customers cheaply. Many aftermarket suppliers offered similar covers over the years. The big giveaway is the fact the cloth goes to the edge of the seat. If you look at the factory picture I provided or this 71 Suburban interior attached you will see the cloth and vinyl mixture and the center vinyl panel with the debossed scroll work. You are correct in that Z62 is the RPO code for the Custom Comfort and Appearance equipment. This included a number of things like the bright trim and the cloth/vinyl seat cover. In addition it bumped the fender emblems from the base C/10 to Custom/10 in this case. The 607 is the production code for that specific Z62 type and color seat cover. The exterior color appears to be the 501 medium blue poly unless you have one of the two-tone combinations.

10-4! If its not original then I guess I'm good to go for switching it black now! Thanks for the tutorial.

Any thoughts on where I can break down my protect-o plate codes?
Posted via Mobile Device