3in spindle question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mxsurfer184 · 08-01-2013, 09:26 PM

My truck has a flip kit in the rear and 3in spindles with 1/4 coil cut on stock springs up front. To get the front lower should I go with 1 or 2 in springs? Will I need any additional mods? Would 2in spindles and 2 in springs look better?

Thanks for the advice.. Just looking to get the front end a little lower
Posted via Mobile Device

bdiamond · 08-01-2013, 10:26 PM

I cut a whole coil off a pair of Moog 6102 coils. The truck sat exactly the same as the 3" coils that were in it before. 1/4 coil probably didn't drop it more than the thickness of the coil.

cochino12 · 08-01-2013, 10:37 PM

I'd just cut more of the coil you have, they ride just fine like that. Nice truck

mgchevyparts · 08-01-2013, 10:46 PM

1/4 coil is almost nothing, I would do 1 full coil but you can experiment and do 3/4 coil first.

mxsurfer184 · 08-02-2013, 08:29 AM

sounds like cutting more coil is the way to go...

second question, I'm running stock tires up front that sit pretty high. will I have rubbing issues once I go that low?

Tx Firefighter · 08-02-2013, 02:41 PM

I'm running a flip kit in the rear and 3 inch spindles with one coil cut on my truck. It sits right.

You're definitely going to need shorter front tires. I went about 2 inches shorter front tire than the rear ones. Stock 28 inch tall tires are gonna run a lot with any real front drop.
Posted via Mobile Device

mxsurfer184 · 08-02-2013, 02:56 PM

Tx, can you post a photo of your stance?..

my fronts are 235/75-15
my rears are 255/60-15

should I moved the 255's up front and get the 295's for the rear..?

Tx Firefighter · 08-02-2013, 03:08 PM

I don't have any real pictures of it right now. When I do a build thread, I'll take some proper pics. It's kind of a patina wagon right now with all the surface rust and mismatched panels. It's an old longbed I got for free and shortened the frame for a Craigslist cheapie bed.

Her is a cell picture snapped through my windshield.
Posted via Mobile Device

Tx Firefighter · 08-02-2013, 03:08 PM

Forgot to add, tires are 215/75-15 front and 235/75-15 rear.
Posted via Mobile Device

mxsurfer184 · 08-02-2013, 11:06 PM

should I moved the 255's up front and get the 15x10 295's for the rear..?
Posted via Mobile Device

08-01-2013, 09:26 PM	#1
mxsurfer184 Registered User Join Date: Jan 2011 Location: Orlando, Florida Posts: 16	3in spindle question... My truck has a flip kit in the rear and 3in spindles with 1/4 coil cut on stock springs up front. To get the front lower should I go with 1 or 2 in springs? Will I need any additional mods? Would 2in spindles and 2 in springs look better? Thanks for the advice.. Just looking to get the front end a little lower Posted via Mobile Device

08-01-2013, 10:26 PM	#2
bdiamond Registered User Join Date: Sep 2007 Location: Wichita Falls, Texas Posts: 459	Re: 3in spindle question... I cut a whole coil off a pair of Moog 6102 coils. The truck sat exactly the same as the 3" coils that were in it before. 1/4 coil probably didn't drop it more than the thickness of the coil.

08-01-2013, 10:37 PM	#3
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: 3in spindle question... I'd just cut more of the coil you have, they ride just fine like that. Nice truck __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

08-01-2013, 10:46 PM	#4
mgchevyparts Registered User Join Date: Feb 2013 Location: Upland, Calif Posts: 698	Re: 3in spindle question... 1/4 coil is almost nothing, I would do 1 full coil but you can experiment and do 3/4 coil first. __________________ 1957 CHEVY 1/2 TON SHORT BED 1940 FORD 1/2 TON SHORT BED

08-02-2013, 08:29 AM	#5
mxsurfer184 Registered User Join Date: Jan 2011 Location: Orlando, Florida Posts: 16	Re: 3in spindle question... sounds like cutting more coil is the way to go... second question, I'm running stock tires up front that sit pretty high. will I have rubbing issues once I go that low?

08-02-2013, 02:41 PM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 3in spindle question... I'm running a flip kit in the rear and 3 inch spindles with one coil cut on my truck. It sits right. You're definitely going to need shorter front tires. I went about 2 inches shorter front tire than the rear ones. Stock 28 inch tall tires are gonna run a lot with any real front drop. Posted via Mobile Device

08-02-2013, 02:56 PM	#7
mxsurfer184 Registered User Join Date: Jan 2011 Location: Orlando, Florida Posts: 16	Re: 3in spindle question... Tx, can you post a photo of your stance?.. my fronts are 235/75-15 my rears are 255/60-15 should I moved the 255's up front and get the 295's for the rear..?

08-02-2013, 03:08 PM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 3in spindle question... I don't have any real pictures of it right now. When I do a build thread, I'll take some proper pics. It's kind of a patina wagon right now with all the surface rust and mismatched panels. It's an old longbed I got for free and shortened the frame for a Craigslist cheapie bed. Her is a cell picture snapped through my windshield. Posted via Mobile Device

08-02-2013, 03:08 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 3in spindle question... Forgot to add, tires are 215/75-15 front and 235/75-15 rear. Posted via Mobile Device

08-02-2013, 11:06 PM	#10
mxsurfer184 Registered User Join Date: Jan 2011 Location: Orlando, Florida Posts: 16	Re: 3in spindle question... should I moved the 255's up front and get the 15x10 295's for the rear..? Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.