79 C10 swap with L92 with 6L90 - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NertiN · 07-25-2010, 01:02 AM

Nice video!!!

tvblazer78 · 07-26-2010, 10:34 AM

Cool test run! And sounds good as welll!

OJOOJO · 07-26-2010, 06:51 PM

waaaaaw maizing

JHT67 · 09-01-2010, 05:30 PM

Quote:

Originally Posted by OJOOJO

waaaaaw maizing

Looks like someone from Dubai might be spying on you

v502 · 09-01-2010, 06:08 PM

Quote:

Originally Posted by JHT67

Looks like someone from Dubai might be spying on you

you never know.

Update: Been having issues with S&P AC bracket its not perfect having the belt ripped once and 2 just came off with little stripping on the edges.

Until i find a solution i don't recommend them.

3r!c84 · 09-01-2010, 08:20 PM

buy tires yet ?

81C10LS3 · 11-14-2010, 04:12 AM

Transmisson without transfer case

Is there any way you can find out a part number for that tail housing when they converted it. I have a 6.2/6L80 out of a 2010 camaro. it has a hard flange, but i want to swap to a traditional yoke style like yours and i'm having a hard time finding just that part. even a phone number to the tranny shop you used would be nice.

I bought the drive shaft from the donor vehicle but it's two-piece with a carrier bearing and i've heard bad things about them. worst case, i'll adapt it but i've got serious power and would REALLY like a one piece shaft..

thanks,

Justin

v502 · 11-15-2010, 12:30 AM

Quote:

Originally Posted by 81C10LS3

Transmisson without transfer case

Is there any way you can find out a part number for that tail housing when they converted it. I have a 6.2/6L80 out of a 2010 camaro. it has a hard flange, but i want to swap to a traditional yoke style like yours and i'm having a hard time finding just that part. even a phone number to the tranny shop you used would be nice.

I bought the drive shaft from the donor vehicle but it's two-piece with a carrier bearing and i've heard bad things about them. worst case, i'll adapt it but i've got serious power and would REALLY like a one piece shaft..

thanks,

Justin

Yeah man download the catalog from http://www.hotrodlane.cc/ and look it it you find it there i going try to give them a call on monday and get you the part #.

81C10LS3 · 11-15-2010, 01:07 AM

Quote:

Originally Posted by v502

Yeah man download the catalog from http://www.hotrodlane.cc/ and look it it you find it there i going try to give them a call on monday and get you the part #.

Thanks for the quick reply. I'm offshore right now and my internet is SUPER slow. I'll try to call them in the morning. Thanks again...

v502 · 11-15-2010, 03:39 AM

Quote:

Originally Posted by 81C10LS3

Thanks for the quick reply. I'm offshore right now and my internet is SUPER slow. I'll try to call them in the morning. Thanks again...

We are doing another truck for a friend at a shop right now i go check if they got a part # or anything for you.

3r!c84 · 12-09-2010, 12:52 AM

any updates

c10seconds · 12-25-2010, 02:25 AM

Thats one crazy video. I LIKE IT!

hotrod_991 · 12-25-2010, 06:43 PM

holy Sh&T man!! That is what I want!! Just raw unadulterated, violent horespower and torque!! I have watched that 5 times already. I have my SBC tore down right now so makes me want to step it up!

CamaroChris · 04-09-2011, 06:35 AM

Looks good!

kvn1011 · 04-16-2011, 10:31 AM

Quote:

Originally Posted by v502

Picked the truck on Friday Guy got over 400 rwhp on the dyno and damn the truck is scary anyhow i love the power and 6 speed is awesome.

Took the truck to the empty parking lot 10 mile away from the city and had little fun and to make sure everything is fine

Enjoy

YouTube- 1979 chevy Ls3 Burnout

WOW!!!!!!!

Posted via Mobile Device

81C10LS3 · 01-31-2012, 10:27 AM

this thread can never die.... I just HAD to read it AGAIN. that video makes me sit up a little straighter. Forgot to say thanks for pointing me in the right direction for adapting the tailhousing on my 6L80. I called s&p and they have what I need. My builds coming along. One day soon, i'll be lighting up a local parking lot like you brother...

81Sierra · 03-03-2012, 01:28 PM

unreal build. did you ever ship it out to your dad?

Houston Ben · 08-06-2013, 11:30 AM

Sorry to raise an old thread....
V502, if you are still on here, how did you hook up your 6L90 to the column? I am putting a 6L80 into an 86 and bought a shift link from shiftworks but it feels realy sloppy and loose and I can't get it to go into M.

Anyone have any ideas?

07-25-2010, 01:02 AM	#201
NertiN Registered User Join Date: Nov 2009 Location: Culiacan Sinaloa Mexico Posts: 13	Re: 79 C10 swap with L92 with 6L90 Nice video!!!

07-26-2010, 10:34 AM	#202
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: 79 C10 swap with L92 with 6L90 Cool test run! And sounds good as welll! __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

07-26-2010, 06:51 PM	#203
OJOOJO Registered User Join Date: Apr 2006 Location: DUBAI Posts: 4	Re: 79 C10 swap with L92 with 6L90 waaaaaw maizing

09-01-2010, 08:20 PM	#206
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: 79 C10 swap with L92 with 6L90 buy tires yet ? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

11-14-2010, 04:12 AM	#207
81C10LS3 Registered User Join Date: Jun 2010 Location: Slidell, La Posts: 38	Re: 79 C10 swap with L92 with 6L90 Transmisson without transfer case Is there any way you can find out a part number for that tail housing when they converted it. I have a 6.2/6L80 out of a 2010 camaro. it has a hard flange, but i want to swap to a traditional yoke style like yours and i'm having a hard time finding just that part. even a phone number to the tranny shop you used would be nice. I bought the drive shaft from the donor vehicle but it's two-piece with a carrier bearing and i've heard bad things about them. worst case, i'll adapt it but i've got serious power and would REALLY like a one piece shaft.. thanks, Justin

12-09-2010, 12:52 AM	#211
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: 79 C10 swap with L92 with 6L90 any updates __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

12-25-2010, 02:25 AM	#212
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: 79 C10 swap with L92 with 6L90 Thats one crazy video. I LIKE IT!

12-25-2010, 06:43 PM	#213
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: 79 C10 swap with L92 with 6L90 holy Sh&T man!! That is what I want!! Just raw unadulterated, violent horespower and torque!! I have watched that 5 times already. I have my SBC tore down right now so makes me want to step it up! __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

04-09-2011, 06:35 AM	#214
CamaroChris Registered User Join Date: Mar 2011 Location: Midvale, Utah Posts: 220	Re: 79 C10 swap with L92 with 6L90 Looks good!

01-31-2012, 10:27 AM	#216
81C10LS3 Registered User Join Date: Jun 2010 Location: Slidell, La Posts: 38	Re: 79 C10 swap with L92 with 6L90 this thread can never die.... I just HAD to read it AGAIN. that video makes me sit up a little straighter. Forgot to say thanks for pointing me in the right direction for adapting the tailhousing on my 6L80. I called s&p and they have what I need. My builds coming along. One day soon, i'll be lighting up a local parking lot like you brother... __________________ 81 C10 LS3/6L80 - frame off - in progress

03-03-2012, 01:28 PM	#217
81Sierra Registered User Join Date: Feb 2012 Location: Barrie, Ontario Posts: 14	Re: 79 C10 swap with L92 with 6L90 unreal build. did you ever ship it out to your dad? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=511852

08-06-2013, 11:30 AM	#218
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: 79 C10 swap with L92 with 6L90 Sorry to raise an old thread.... V502, if you are still on here, how did you hook up your 6L90 to the column? I am putting a 6L80 into an 86 and bought a shift link from shiftworks but it feels realy sloppy and loose and I can't get it to go into M. Anyone have any ideas?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.