6000 rpm tach anyone... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theastronaut · 08-09-2013, 12:30 PM

Thanks for posting this, I wanted a tach that went to 10k and looked stock but didn't know how to do it... so I paid to have one made. I like to do stuff myself though so this is good info for the next project!

Here's mine, Jason at Greenback Decal built it from a block-off plate.

Grandpa54 · 06-01-2015, 09:25 PM

Quote:

Originally Posted by theastronaut

thanks for posting this, i wanted a tach that went to 10k and looked stock but didn't know how to do it... So i paid to have one made. I like to do stuff myself though so this is good info for the next project!

Here's mine, jason at greenback decal built it from a block-off plate.

theastronaut, do you mind sharing who did your tach

08-09-2013, 12:30 PM	#1
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,909	Re: 6000 rpm tach anyone... Thanks for posting this, I wanted a tach that went to 10k and looked stock but didn't know how to do it... so I paid to have one made. I like to do stuff myself though so this is good info for the next project! Here's mine, Jason at Greenback Decal built it from a block-off plate. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.