AL 1970 bare cab / driver fender/ cowl - The 1947 - Present Chevrolet & GMC Truck Message Board Network

496bb · 08-02-2013, 05:48 PM

bare cab, has VIN plate still attached. no title, just bill of sale. has been blasted at some point but not primed, so it has some surface rust. i think it will clean up fine though. cab corners are good and rockers have a few small holes but not eaten completely through. small bit of rust where floor meets kick panel. uncut dash, firewall good. has mounting nubs for divider trim and headliner. sold my project so somebody needs to come get this! $150 pickup only

GOING TO THE SCRAP YARD NEXT WEEK IF NOBODY WANTS IT

CST drivers fender, good shape. $50 pickup only

good cowl piece with mesh debris shield. $30 pickup only

496bb · 08-02-2013, 06:06 PM

496bb · 08-04-2013, 03:03 PM

Bump

**nlped** · 08-04-2013, 04:29 PM

How's the roof & windshield areas? Rust, dents etc? Hard to tell in the pics, but is that a dent on the roof?
Posted via Mobile Device

**nlped** · 08-04-2013, 04:35 PM

And to prevent being sniped. I'm gonna take it if the roof isn't dented and I lay eyes on it. PM sent.

Posted via Mobile Device

496bb · 08-04-2013, 07:57 PM

Roof not dented. No rot around windshield or drip rails. Rust is surface as seen in photos
Posted via Mobile Device

**nlped** · 08-04-2013, 08:42 PM

When can I come see it?
Posted via Mobile Device

**special-K** · 08-06-2013, 09:45 AM

How soon does it have to be picked up?

**nlped** · 08-06-2013, 10:34 AM

I'm going to pick it up tomorrow

Posted via Mobile Device

**nlped** · 08-10-2013, 03:02 PM

Nice doing business with you Chad. I got the cab unloaded & in the garage just before it started raining! I'm tired of this rain!

Don't forget to shoot me that contact info for the blaster.

Thanks again!
Posted via Mobile Device

STOCKISH · 08-10-2013, 03:50 PM

Nice buy!!

496bb · 08-10-2013, 07:18 PM

Cab and cowl SOLD. Fender still available.

Same here Ed! Nice to meet ya.

PM on the way. I think I corrected that other issue we discussed, if you would let me know. Thanks again.

**nlped** · 08-11-2013, 09:08 AM

It's fixed! And th me for the contact info.

Posted via Mobile Device

08-02-2013, 05:48 PM	#1
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	1970 bare cab / driver fender/ cowl bare cab, has VIN plate still attached. no title, just bill of sale. has been blasted at some point but not primed, so it has some surface rust. i think it will clean up fine though. cab corners are good and rockers have a few small holes but not eaten completely through. small bit of rust where floor meets kick panel. uncut dash, firewall good. has mounting nubs for divider trim and headliner. sold my project so somebody needs to come get this! $150 pickup only GOING TO THE SCRAP YARD NEXT WEEK IF NOBODY WANTS IT CST drivers fender, good shape. $50 pickup only good cowl piece with mesh debris shield. $30 pickup only __________________ 87 3/4 Burb 454 49 Chev Fleetline Deluxe Last edited by 496bb; 08-04-2013 at 03:03 PM.

08-02-2013, 06:06 PM	#2
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: 1970 bare cab / driver fender/ cowl __________________ 87 3/4 Burb 454 49 Chev Fleetline Deluxe

08-04-2013, 03:03 PM	#3
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: 1970 bare cab / driver fender/ cowl Bump __________________ 87 3/4 Burb 454 49 Chev Fleetline Deluxe

08-04-2013, 04:29 PM	#4
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1970 bare cab / driver fender/ cowl How's the roof & windshield areas? Rust, dents etc? Hard to tell in the pics, but is that a dent on the roof? Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-04-2013, 04:35 PM	#5
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1970 bare cab / driver fender/ cowl And to prevent being sniped. I'm gonna take it if the roof isn't dented and I lay eyes on it. PM sent. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha Last edited by nlped; 08-04-2013 at 04:50 PM.

08-04-2013, 07:57 PM	#6
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: 1970 bare cab / driver fender/ cowl Roof not dented. No rot around windshield or drip rails. Rust is surface as seen in photos Posted via Mobile Device __________________ 87 3/4 Burb 454 49 Chev Fleetline Deluxe

08-04-2013, 08:42 PM	#7
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1970 bare cab / driver fender/ cowl When can I come see it? Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-06-2013, 09:45 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1970 bare cab / driver fender/ cowl How soon does it have to be picked up? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-06-2013, 10:34 AM	#9
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1970 bare cab / driver fender/ cowl I'm going to pick it up tomorrow Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-10-2013, 03:02 PM	#10
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1970 bare cab / driver fender/ cowl Nice doing business with you Chad. I got the cab unloaded & in the garage just before it started raining! I'm tired of this rain! Don't forget to shoot me that contact info for the blaster. Thanks again! Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-10-2013, 03:50 PM	#11
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1970 bare cab / driver fender/ cowl Nice buy!! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-10-2013, 07:18 PM	#12
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: 1970 bare cab / driver fender/ cowl Cab and cowl SOLD. Fender still available. Same here Ed! Nice to meet ya. PM on the way. I think I corrected that other issue we discussed, if you would let me know. Thanks again. __________________ 87 3/4 Burb 454 49 Chev Fleetline Deluxe

08-11-2013, 09:08 AM	#13
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1970 bare cab / driver fender/ cowl It's fixed! And th me for the contact info. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.