The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-07-2013, 11:43 PM   #1
dzwestwindsor
Registered User
 
Join Date: Apr 2013
Location: Princeton, NJ
Posts: 40
Carburetor Vacuum Lines

Hi guys,

I have a 1971 C20 with a 350 and Quadrajet carb.

Take a look at pictures of my carb:
front view: http://imageshack.us/f/407/cdiv.jpg/
diagonal side view: http://imageshack.us/f/545/3d7u.jpg/

I have two concerns:

1. In the front of the carb, what is that vacuum port for? What is it supposed to be connected to? If I put my finger on it, I feel a pretty good suction. I feel like it's missing a hose to somewhere.

2. In that diagonal side view image, is that hose supposed to be routed back up to the air cleaner? When I got the truck it was only connected on the carb end so I guessed that the other end goes up to the cleaner, but I'm not sure. Is it the hose that keeps the float bowl fuel pressure constant?

It'll be great if someone could point out what those two vacuum ports are for.

Thanks in advance,
David

Last edited by dzwestwindsor; 08-07-2013 at 11:48 PM.
dzwestwindsor is offline   Reply With Quote
Old 08-07-2013, 11:51 PM   #2
Drewski23
Registered User
 
Join Date: Jun 2013
Location: Saint Louis, MO
Posts: 142
Re: Carburetor Vacuum Lines

Pcv on the valve cover?


Actually on my truck ive got 3 spots in the front for hoses...vac advance, fuel, then the third is plugged. So yes i think its for the factory air assembly

Mine has an edelbrock carb but im sure they have the same hook ups

Last edited by Drewski23; 08-07-2013 at 11:57 PM.
Drewski23 is offline   Reply With Quote
Old 08-08-2013, 12:07 AM   #3
mmiddle
Registered User
 
mmiddle's Avatar
 
Join Date: Jul 2013
Location: Forestburg, Texas
Posts: 659
Re: Carburetor Vacuum Lines

Wow, this is really early Q-jet.
The front one is (should) Venturi vacuum. Cap it off.
The rear one, the picture is not very clear, should be manafold vacuum and it should be for the PCV system.
This carb, I think is an early-mid 1960 model.

Do us a favor and pull the air cleaner and take better pictures. I'm wondering if this is an early square bore Q-jet. 1959-1965 era.
__________________
Mark
Jesus is the Way!
2003 2500HD CCLB Duramax/Ali (Clifford)
2014 2SS/RS black on black Camaro (Betty)
2006 Pontiac SOLSTICE silver/black (Lula-Bell)
1970 C/10 Short Wide (Peggy)
1964 C/10 Short Step (Hambone)
RIP Jimmy Hamilton Thank you for the trucks
mmiddle is offline   Reply With Quote
Old 08-08-2013, 12:20 AM   #4
dzwestwindsor
Registered User
 
Join Date: Apr 2013
Location: Princeton, NJ
Posts: 40
Re: Carburetor Vacuum Lines

For question #2, I was referring to the thinner hose that comes out of the carb near the choke and goes back up to the air cleaner. (I know that the big hose back there is the PCV, but what about this thin one?) Not sure if it's actually supposed to go back up to the air cleaner.
dzwestwindsor is offline   Reply With Quote
Old 08-08-2013, 01:00 AM   #5
mmiddle
Registered User
 
mmiddle's Avatar
 
Join Date: Jul 2013
Location: Forestburg, Texas
Posts: 659
Re: Carburetor Vacuum Lines

A: Venturi vacuum. Cap Off
B: PCV system Vacuum
C: Thermostatic carb heat vacuum source. If you are still using the system keep this. If not... Cap Off
D: ????? Cap Off
Attached Images
 
__________________
Mark
Jesus is the Way!
2003 2500HD CCLB Duramax/Ali (Clifford)
2014 2SS/RS black on black Camaro (Betty)
2006 Pontiac SOLSTICE silver/black (Lula-Bell)
1970 C/10 Short Wide (Peggy)
1964 C/10 Short Step (Hambone)
RIP Jimmy Hamilton Thank you for the trucks
mmiddle is offline   Reply With Quote
Old 08-08-2013, 01:01 AM   #6
hoovers71
Registered User
 
Join Date: Jan 2013
Location: Bencia
Posts: 38
Re: Carburetor Vacuum Lines

the small line coming off near the choke goes up to the air cleaner.
hoovers71 is offline   Reply With Quote
Old 08-08-2013, 05:51 AM   #7
asolde
Registered User
 
asolde's Avatar
 
Join Date: Apr 2012
Location: Henderson Nevada
Posts: 804
Re: Carburetor Vacuum Lines

Here you go
Attached Images
 
asolde is offline   Reply With Quote
Old 08-08-2013, 01:36 PM   #8
dzwestwindsor
Registered User
 
Join Date: Apr 2013
Location: Princeton, NJ
Posts: 40
Re: Carburetor Vacuum Lines

Thanks everyone for your help. I'm going to get some plugs right now.

And mmiddle, here is the carb without the cleaner over it... do you know anything about it?







-David
dzwestwindsor is offline   Reply With Quote
Old 08-08-2013, 10:32 PM   #9
mmiddle
Registered User
 
mmiddle's Avatar
 
Join Date: Jul 2013
Location: Forestburg, Texas
Posts: 659
Re: Carburetor Vacuum Lines

I was wrong...or hoping I was right It is just a regular Q-jet. Those first pics looked weird.
__________________
Mark
Jesus is the Way!
2003 2500HD CCLB Duramax/Ali (Clifford)
2014 2SS/RS black on black Camaro (Betty)
2006 Pontiac SOLSTICE silver/black (Lula-Bell)
1970 C/10 Short Wide (Peggy)
1964 C/10 Short Step (Hambone)
RIP Jimmy Hamilton Thank you for the trucks
mmiddle is offline   Reply With Quote
Old 08-11-2013, 09:03 PM   #10
mikeshome
Registered User
 
mikeshome's Avatar
 
Join Date: Jul 2013
Location: Mount Albert.Ontario
Posts: 119
Re: Carburetor Vacuum Lines

I know it needs a good cleaning.lol
mikeshome is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:14 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com