help i got the oringinal 327 and intake i need help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

buddylj1990 · 08-09-2013, 03:25 PM

i just got the truck and was so excited about it i just took a quick look at intake when i got the truck the man said carb was in truck and it was so got the truck home picked up carb and top fell off the ooold small 4 barrel rochester and found out no floats or anything in it the ports are smaller than holley and cant find adapter for anyone else have this problem dont want to change intakes Name: Image08062013152653(1).jpg
Views: 232
Size: 64.0 KB

Name: Image08062013152653(1).jpg
Views: 232
Size: 64.0 KB

**WIDESIDE72** · 08-09-2013, 03:34 PM

I may be wrong but i believe that a Rochester quadrajet was standard in 67. Prior to this was a Rochester 4gc. Sounds like yours is missing parts (?) if just the float is missing they are abailable and should be replaced when rebuilding anyway. A quadrajet should be easy to source. It depends on if the carb you have is original and if you want to retain it for numbers matching issues. If it is, you could probably find a donor carb for parts. If not concerned with that issue, any Sbc q jet from the early to mid 70's would work with little to no modifications.
Posted via Mobile Device

**WIDESIDE72** · 08-09-2013, 03:35 PM

Post a photo of the carb and give us the numbers on the left side running vertically toward the rear of the carb.
Posted via Mobile Device

MARKDTN · 08-09-2013, 04:28 PM

Probably a 4GC. I would buy an aftermarket aluminum or factory Qjet intake and a later Qjet. You will be way ahead moneywise as those 4GCs are getting harder to find parts for and do not offer the performance/mileage of a Quadrajet. With a 67 you will either have to find an early stock or aftermarket intake with the oil fill hole or go to later valve covers.

buddylj1990 · 08-09-2013, 04:52 PM

heres the intake on it the carbs few miles away i was being stupid and got another updated carb a holley thinking it would bolt up to the intake come to find out it wouldn't the diameter of the ports are larger Name: Image08092013164500.jpg
Views: 212
Size: 57.3 KB

Name: Image08092013164500.jpg
Views: 212
Size: 57.3 KB

buddylj1990 · 08-09-2013, 05:01 PM

ya its the 4gc and i would need a complete carb to fix it cause theres no flosts no vacuum secondary no spring or anything its just a shell basically if lol but he did give me a rebuild kit with it

gvw5400 · 08-09-2013, 05:07 PM

X2 aftermarket aluminum intake. Many of these allow a Q-jet [spread bore] or a Holley, AFB, Edlebrock performer, [square bore] carb. This gives you many options and the ability to change your mind and carbs as you wish. I understand not wanting to change manifolds but you really will be miles ahead in the long run. Nice looking 67 you have there! Have fun making this YOUR truck.

buddylj1990 · 08-10-2013, 06:35 PM

found the adapter online for it ordered it and it came in of course it came missing bolt that bolt it to in take so can't put on till tue or wed. it sucks

buddylj1990 · 08-10-2013, 07:06 PM

if anyone else have this problem and don't want to change intakes heres pic of adapter and part number[ATTACH][ATTACH] Name: Image08102013190037.jpg
Views: 233
Size: 42.0 KB

Name: Image08102013190037.jpg
Views: 233
Size: 42.0 KB

[/ATTACH][/ATTACH]

luvbowties · 08-11-2013, 10:14 PM

Quote:

Originally Posted by buddylj1990

if anyone else have this problem and don't want to change intakes heres pic of adapter and part number[ATTACH][ATTACH]Attachment 1139398[/ATTACH][/ATTACH]

FYI, looks as if that will adapt a Holley or maybe an Edelbrock, but NOT a quadrajet. Just don't wish for you to collect ANOTHER non-fittable carb to your collection.

...and seems you are quite nice to have not bad-mouthed the p/o from whom you received a carb-shell

--quite respectable of you!!!
Sam

oklalawnboy · 08-11-2013, 11:31 PM

Quote:

Originally Posted by luvbowties

fyi, looks as if that will adapt a holley or maybe an edelbrock, but not a quadrajet. Just don't wish for you to collect another non-fittable carb to your collection.

...and seems you are quite nice to have not bad-mouthed the p/o from whom you received a carb-shell

--quite respectable of you!!!
Sam

x2

buddylj1990 · 08-12-2013, 12:52 AM

ya its the adapter i can use for know so i can at lease drive truck see the rochester that came on this is the 4gc it has the same bolt pattern as the qua-jet [can't spell] but the ports are smaller than holley in diameter i didn't want to change intakes to put an holley on it so found the adapter so i could use the holley for right know till i can find a parts rochester so i can put stock one back on

08-09-2013, 03:25 PM	#1
buddylj1990 Registered User Join Date: Aug 2013 Location: waynesville georgia Posts: 164	help i got the oringinal 327 and intake i need help i just got the truck and was so excited about it i just took a quick look at intake when i got the truck the man said carb was in truck and it was so got the truck home picked up carb and top fell off the ooold small 4 barrel rochester and found out no floats or anything in it the ports are smaller than holley and cant find adapter for anyone else have this problem dont want to change intakes

08-09-2013, 03:34 PM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: help i got the oringinal 327 and intake i need help I may be wrong but i believe that a Rochester quadrajet was standard in 67. Prior to this was a Rochester 4gc. Sounds like yours is missing parts (?) if just the float is missing they are abailable and should be replaced when rebuilding anyway. A quadrajet should be easy to source. It depends on if the carb you have is original and if you want to retain it for numbers matching issues. If it is, you could probably find a donor carb for parts. If not concerned with that issue, any Sbc q jet from the early to mid 70's would work with little to no modifications. Posted via Mobile Device

08-09-2013, 03:35 PM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: help i got the oringinal 327 and intake i need help Post a photo of the carb and give us the numbers on the left side running vertically toward the rear of the carb. Posted via Mobile Device

08-09-2013, 04:28 PM	#4
MARKDTN Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 2,165	Re: help i got the oringinal 327 and intake i need help Probably a 4GC. I would buy an aftermarket aluminum or factory Qjet intake and a later Qjet. You will be way ahead moneywise as those 4GCs are getting harder to find parts for and do not offer the performance/mileage of a Quadrajet. With a 67 you will either have to find an early stock or aftermarket intake with the oil fill hole or go to later valve covers. __________________ '83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project

08-09-2013, 04:52 PM	#5
buddylj1990 Registered User Join Date: Aug 2013 Location: waynesville georgia Posts: 164	Re: help i got the oringinal 327 and intake i need help heres the intake on it the carbs few miles away i was being stupid and got another updated carb a holley thinking it would bolt up to the intake come to find out it wouldn't the diameter of the ports are larger

08-09-2013, 05:01 PM	#6
buddylj1990 Registered User Join Date: Aug 2013 Location: waynesville georgia Posts: 164	Re: help i got the oringinal 327 and intake i need help ya its the 4gc and i would need a complete carb to fix it cause theres no flosts no vacuum secondary no spring or anything its just a shell basically if lol but he did give me a rebuild kit with it

08-09-2013, 05:07 PM	#7
gvw5400 Registered User Join Date: May 2013 Location: Colorado Rocky Mountains Posts: 263	Re: help i got the oringinal 327 and intake i need help X2 aftermarket aluminum intake. Many of these allow a Q-jet [spread bore] or a Holley, AFB, Edlebrock performer, [square bore] carb. This gives you many options and the ability to change your mind and carbs as you wish. I understand not wanting to change manifolds but you really will be miles ahead in the long run. Nice looking 67 you have there! Have fun making this YOUR truck.

08-10-2013, 06:35 PM	#8
buddylj1990 Registered User Join Date: Aug 2013 Location: waynesville georgia Posts: 164	Re: help i got the oringinal 327 and intake i need help found the adapter online for it ordered it and it came in of course it came missing bolt that bolt it to in take so can't put on till tue or wed. it sucks

08-10-2013, 07:06 PM	#9
buddylj1990 Registered User Join Date: Aug 2013 Location: waynesville georgia Posts: 164	Re: help i got the oringinal 327 and intake i need help if anyone else have this problem and don't want to change intakes heres pic of adapter and part number[ATTACH][ATTACH][/ATTACH][/ATTACH] Attached Images

08-12-2013, 12:52 AM	#12
buddylj1990 Registered User Join Date: Aug 2013 Location: waynesville georgia Posts: 164	Re: help i got the oringinal 327 and intake i need help ya its the adapter i can use for know so i can at lease drive truck see the rochester that came on this is the 4gc it has the same bolt pattern as the qua-jet [can't spell] but the ports are smaller than holley in diameter i didn't want to change intakes to put an holley on it so found the adapter so i could use the holley for right know till i can find a parts rochester so i can put stock one back on



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.