15x12 & 325/50/15 MT's - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

468BIGBLOCK · 01-21-2013, 10:00 AM

I love the looks of those tires!!

Quote:

Originally Posted by 68GMCCustom

Well mine are the 315/60-15 MT ET Street d/r's...mounted on a 15x10 rally wheel with 4.5" b.s. The 1st pick shows 15x8 rallys (4" bs?) with 275/60-15 BFG's.

I need to get some different wheels with a 5.5" to 6" b.s....or even more if they're over 10" wide.

68GMCCustom · 01-21-2013, 06:56 PM

Thanks!
They might even be available fairly soon as I'm looking to upgrade to a 17/18 stagger (or similar) wheels.... and am considering letting these go, and buying something wider for the track. Have 2 passes and maybe 70-80mi on them.

redsled87 · 01-24-2013, 12:44 PM

Well, I went with the 325's and a 15x10. I'm going to be running Convo Pro's too. I got a good deal on M/Ts this past summer. Brand new never used, $340 shipped. Got a set of gently used Convo Pro's for $340 shipped. The down side after measuring this past weekend, I'm going to have to mini tub it anyway. Oh well, I'll just make room for a wider combo if I want them down the road.

C0UCH · 03-24-2013, 11:02 PM

Looking to run 28x12x15's front and rear on my 67 fleet side with 10" wide wheels. Anyone know off hand if these will stuff in the stock wells without major clearance issues? Stage II Porterbuilt setup.

Sixshooter44 · 04-10-2013, 10:40 PM

With a 15x10 rim what kind of bs would work on a 67 stepper? Thanks guys
Posted via Mobile Device

68GMCCustom · 04-10-2013, 11:46 PM

5" would work... but to match the bs of the front 15x8's (if at 4")...you'd want 6"

Sixshooter44 · 04-11-2013, 01:01 AM

Thanks for the reply, this is my first truck an I am excited to see what can be done with it
Posted via Mobile Device

elf w/capital T · 07-15-2013, 06:28 PM

Pixx!!! What rear end?

C0UCH · 08-10-2013, 06:51 PM

Nitto 555R 325/50R15 on Aero 15x9.5 4.5BS

Posted via Mobile Device

Sixshooter44 · 08-10-2013, 06:54 PM

Now that looks awesome
Posted via Mobile Device

jons70 · 08-11-2013, 08:03 AM

Anyone have a rear end shot of a fleet side 67-72 with a 325-50-15 on a 10" rim and 5" back spacing?

C0UCH · 08-12-2013, 03:24 PM

I'll take a rearend shot tonight, although mine are 9.5 wide wheels with 4.5" backspacing. Haven't measured my rearend width though.

jons70 · 08-12-2013, 03:50 PM

Quote:

Originally Posted by C0UCH

I'll take a rearend shot tonight, although mine are 9.5 wide wheels with 4.5" backspacing. Haven't measured my rearend width though.

I appreciate it and what size tire do you have on the front?? That looks killer! I have 275/60-15's on the front of my truck and it looks pretty good, but your truck looks amazing with the fronts that wide!

jons70 · 08-12-2013, 04:00 PM

Quote:

Originally Posted by C0UCH

I'll take a rearend shot tonight, although mine are 9.5 wide wheels with 4.5" backspacing. Haven't measured my rearend width though.

I appreciate it and what size tire do you have on the front?? That looks killer! I have 275/60-15's on the front of my truck and it looks pretty good, but your truck looks amazing with the fronts that wide!

C0UCH · 08-12-2013, 08:32 PM

Quote:

Originally Posted by jons70

I appreciate it and what size tire do you have on the front?? That looks killer! I have 275/60-15's on the front of my truck and it looks pretty good, but your truck looks amazing with the fronts that wide!

Front and rear are all 325/50R15 on Aero Series 59 wheels. 15x9.5 (4.5" BS)

T Smith · 08-12-2013, 08:41 PM

Quote:

Originally Posted by C0UCH

Nitto 555R 325/50R15 on Aero 15x9.5 4.5BS

Posted via Mobile Device

Why do they say "Goodyear"?

jons70 · 08-12-2013, 11:53 PM

Quote:

Originally Posted by C0UCH

Front and rear are all 325/50R15 on Aero Series 59 wheels. 15x9.5 (4.5" BS)

Wow! I knew there was lots of room in the front wheel well for more tire then my 275/60-15, but didn't think to try a 325/50-15 up there! I think I'll just leave the 275's up there with the 15x8 truck ralley's and put the 325/50-15's on the rear with a 15x10 truck ralley from Wheel Vintiques

Did you get a chance to take a rear end shot of your truck?

Thanks

C0UCH · 08-14-2013, 02:39 AM

Quote:

Originally Posted by T Smith

Why do they say "Goodyear"?

I painted the sidewalls with the Goodyear Eagle logos. Going for the NASCAR theme with the build. The Nitto tires are from Diamondback with their Smoothie treatment on the sidewalls. Made a template off an actuall NASCAR Goodyear Eagle and copied it on the Nittos.

Haven't had a chance to take a rear shot yet. I removed my inner wheel wells. Doubt they would fit with this wide of tire.
Posted via Mobile Device

goosedowning · 08-15-2013, 10:01 AM

My friend runs 325/50r15 bfgs on 15x10 weld wheels on the back. I have pictures but it won't let me upload.
Posted via Mobile Device

01-21-2013, 06:56 PM	#27
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 15x12 & 325/50/15 MT's Thanks! They might even be available fairly soon as I'm looking to upgrade to a 17/18 stagger (or similar) wheels.... and am considering letting these go, and buying something wider for the track. Have 2 passes and maybe 70-80mi on them. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

01-24-2013, 12:44 PM	#28
redsled87 Registered User Join Date: Dec 2011 Location: Lanc Co PA Posts: 226	Re: 15x12 & 325/50/15 MT's Well, I went with the 325's and a 15x10. I'm going to be running Convo Pro's too. I got a good deal on M/Ts this past summer. Brand new never used, $340 shipped. Got a set of gently used Convo Pro's for $340 shipped. The down side after measuring this past weekend, I'm going to have to mini tub it anyway. Oh well, I'll just make room for a wider combo if I want them down the road. __________________ 1987 R10 Pump Gas 496/TH375 Best 1/4 pass to date 60' 1.49 1/4 10.93 MPH 120

03-24-2013, 11:02 PM	#29
C0UCH Registered User Join Date: Jun 2012 Location: Anaheim, CA Posts: 455	Re: 15x12 & 325/50/15 MT's Looking to run 28x12x15's front and rear on my 67 fleet side with 10" wide wheels. Anyone know off hand if these will stuff in the stock wells without major clearance issues? Stage II Porterbuilt setup.

04-10-2013, 10:40 PM	#30
Sixshooter44 Registered User Join Date: Apr 2013 Location: Chicago il Posts: 40	Re: 15x12 & 325/50/15 MT's With a 15x10 rim what kind of bs would work on a 67 stepper? Thanks guys Posted via Mobile Device

04-10-2013, 11:46 PM	#31
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 15x12 & 325/50/15 MT's 5" would work... but to match the bs of the front 15x8's (if at 4")...you'd want 6" __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

04-11-2013, 01:01 AM	#32
Sixshooter44 Registered User Join Date: Apr 2013 Location: Chicago il Posts: 40	Re: 15x12 & 325/50/15 MT's Thanks for the reply, this is my first truck an I am excited to see what can be done with it Posted via Mobile Device

07-15-2013, 06:28 PM	#33
elf w/capital T Registered User Join Date: Feb 2011 Location: North Carolina Posts: 994	Re: 15x12 & 325/50/15 MT's Pixx!!! What rear end?

08-10-2013, 06:51 PM	#34
C0UCH Registered User Join Date: Jun 2012 Location: Anaheim, CA Posts: 455	Re: 15x12 & 325/50/15 MT's Nitto 555R 325/50R15 on Aero 15x9.5 4.5BS Posted via Mobile Device

08-10-2013, 06:54 PM	#35
Sixshooter44 Registered User Join Date: Apr 2013 Location: Chicago il Posts: 40	Re: 15x12 & 325/50/15 MT's Now that looks awesome Posted via Mobile Device

08-11-2013, 08:03 AM	#36
jons70 Registered User Join Date: Apr 2010 Location: Toronto, Canada Posts: 83	Re: 15x12 & 325/50/15 MT's Anyone have a rear end shot of a fleet side 67-72 with a 325-50-15 on a 10" rim and 5" back spacing?

08-12-2013, 03:24 PM	#37
C0UCH Registered User Join Date: Jun 2012 Location: Anaheim, CA Posts: 455	Re: 15x12 & 325/50/15 MT's I'll take a rearend shot tonight, although mine are 9.5 wide wheels with 4.5" backspacing. Haven't measured my rearend width though.

08-15-2013, 10:01 AM	#44
goosedowning Registered User Join Date: Aug 2013 Location: Valdosta Posts: 48	Re: 15x12 & 325/50/15 MT's My friend runs 325/50r15 bfgs on 15x10 weld wheels on the back. I have pictures but it won't let me upload. Posted via Mobile Device Last edited by goosedowning; 08-15-2013 at 10:12 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.