WTB/ 67-68 Seat belt clips - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 11-28-2003, 04:27 AM

I'm looking for a pair of seat belt clips that attach to the front of the center seat / console on 67-68 buddy seats.

**Gary 70 Jimmy** · 11-28-2003, 04:52 AM

I would like to have a pair to

BLAZERMAN · 11-28-2003, 10:46 PM

ttt

BLAZERMAN · 12-03-2003, 08:17 PM

Anyone know where I might find a set?

da-burb · 12-03-2003, 10:16 PM

I have never seen them before. I think it would be easy to make something like that. Even easier to start with the male clip from a seat belt and make something that would work with a cut here and a weld there.

The other thing I have seen is from a blazer. If you didn't order the console you got some plastic buckle keepers that srew to the seat frame.

BLAZERMAN · 12-04-2003, 12:29 AM

I could probably make something easy enough but I'd like to keep it original, these may be the same clips as you mentioned for the blazer seat frame. It looks like these were made of plastic and then screwed to a metal bracket, probably broke pretty easy.

11-28-2003, 04:27 AM	#1
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	WTB/ 67-68 Seat belt clips I'm looking for a pair of seat belt clips that attach to the front of the center seat / console on 67-68 buddy seats. Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 12-04-2003 at 12:23 AM.

11-28-2003, 10:46 PM	#3
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	ttt __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

12-03-2003, 08:17 PM	#4
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Anyone know where I might find a set? __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

12-03-2003, 10:16 PM	#5
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	I have never seen them before. I think it would be easy to make something like that. Even easier to start with the male clip from a seat belt and make something that would work with a cut here and a weld there. The other thing I have seen is from a blazer. If you didn't order the console you got some plastic buckle keepers that srew to the seat frame. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

12-04-2003, 12:29 AM	#6
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	I could probably make something easy enough but I'd like to keep it original, these may be the same clips as you mentioned for the blazer seat frame. It looks like these were made of plastic and then screwed to a metal bracket, probably broke pretty easy. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

11-28-2003, 04:52 AM	#2
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	I would like to have a pair to



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.