little Larry's valve's

[marlo73]

Was wondering if anyone had any knowledge on these manual valves seems kinda pricey but they are sosposed to be faster than the airlift paddle valves.

http://www.littlelarrys.net








Posted via Mobile Device

[lolife99]

They sure do look cool.
Wish they didn't have the name engraved in the front of them.

[marlo73]

Lol I was thinking the same thing but I heard you can get it blank I emailed to see if I could have something custom put on it.
Posted via Mobile Device

[KYburBN]

yeah just put a set of them on a customers 66 c10. worked great and super fast compared to the other manual valves. used 3/8 line whick is a benefit and the valves can work as fast or slow as you want them to.

only minor complaint is they are not as responsive as an electric valve which is expected. hope that helps.

very plzed

[marlo73]

Cool thanks sounds good. So you ran 3/8 line from bags to valves and 3/8 from valves to tank as well. Also did you make a video.
Posted via Mobile Device

[KYburBN]

yup. 3/8 line all around. you could run 1/2 if you want but the 3/8 is more than sufficient. i can make a video give me a day or so and i will post it..

one other thing good about these valves is all the guage ports are made into the block so you dont have alot of t's or crazy fittings to install to read bag and tank pressure.

makes for very clean install and super easy to diagnose an issue if one occurs.
5 lines and your system is up and running.

if you dont use guages just remember to plug the 1/8 ports for the guages. lol

[marlo73]

Cool thanks for all the help I'm going to purchase them I noticed you said five lines is all you need but what did you do as far as exhaust isn't there a 6th port for exhaust and if so did you just put a fitting on it and run a line outside the cab through the fire wall.
Posted via Mobile Device

[KYburBN]

yaeh there is a port for the exhaust. you can put a fitting in and run it out of the cab. i used an air muffler and installed it in the exhaust port. and left it inside the cab. its not very load and i didnt have to put another hole in the cab. your system will work even if you leave the exhaust port open.

[marlo73]

You ever get a chance to take that video
Posted via Mobile Device

[fastcam1]

I really want accuair but these little larry valves do look pretty cool
Posted via Mobile Device

[cochino12]

Originally Posted by KYburBN

. i can make a video give me a day or so and i will post it..

ttt