|
12-04-2003, 04:52 PM
|
#1 |
|
Registered User
Join Date: May 2003
Location: Il
Posts: 90
|
Rear end?
I currently have 2.73 gears and I am wanting to go with 3.73. What would be the best way to go about this? The best deal that I have come up with is the gears for $150 and the bearings for $75 from Zumbrota. Then the only expense would be for someone to put it all together for me. Does this sound like a good deal or is there something better that I could do?
__________________
83 Chevy SWB http://www.cardomain.com/id/letheridge |
|
|
|
12-04-2003, 05:13 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Albany,OR
Posts: 49
|
Man I wish you were closer. I'd swap my 3.73 for your 2.73.
Would really like some better highway gears. The wrecking yard here wants $250 for a 3.08 rearend hub to hub. I don't know, maybe thats a good deal . Seems a little high for a 30 year old rear end.
__________________
1979 Chevy Stepside 250-6,auto. 1981 Suzuki 850 70's Chopper,Springer,hardtail,750 Suzuki engine '84 Stang-wife's |
|
|
|
|
12-04-2003, 05:35 PM
|
#3 |
|
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
 I got mine for 150 10 bolt 3.07 or 3.08s
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
|
|
|
|
12-04-2003, 05:43 PM
|
#4 |
|
BeWarE tHe eViL CrAnkTOe!
Join Date: Oct 2002
Location: Yukon, OK
Posts: 3,605
|
Damn Jim....I wish you were closer too!! hahah I would jump on that!
__________________
~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - 1986 Chevy Custom SWB *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods  www.cardomain.com/id/ramairdave AIM Screenname - Jester84 |
|
|
|
|
12-04-2003, 06:14 PM
|
#5 |
|
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
i've got a 12 bolt with open 3.07's from a 76 sitting here that i'm going to get rid of but i can't ship it, lol.
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
|
|
|
|
12-04-2003, 11:29 PM
|
#6 |
|
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
The price is not bad, it is the install $$$ that will kill you.
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
