IN Frame parts- Parting out 3 LWB 2wd coil spring frames - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 09-01-2013, 10:17 PM

I have 3 LWB 2wd coil spring frames that are not good enough to use because of rust or other damage. Thought I would see if anybody need anything from them. The only items left on most of the frames are the riveted on parts but there are a few misc. parts also. Sorry but no shipping on large items. If I have a box and it will go UPS or USPS then I am ok but bigger than that then I can not ship. Let me know what you need pictures of. Respond to the thread as per rules. All prices are plus shipping cost.

Bed mount brackets: $15.00 each
Trailing arm brackets: $20.00 each
Frame sections: starting at $20.00 and up
Cab mount brackets: $20.00 each
72 front cross member with brakes, steering and p/s box (core) $200.00
Automatic Transmission crossmember: $40.00
Small block engine stands: $20.00 pair
Exhaust hanger brackets: $15.00 each
Custom T handle automatic shifter: Priceless
Everything else: please ask

**Cash3481** · 09-01-2013, 11:30 PM

Todd,
I have a friend that needs a front cab support... I think!
I'll find out which on and message back here tomorrow.
Thanks for cutting these up for us all, so they can live on.
Mike
Posted via Mobile Device

**Todd68Chevy** · 09-02-2013, 08:58 PM

Quote:

Originally Posted by Cash3481

Todd,
I have a friend that needs a front cab support... I think!
I'll find out which on and message back here tomorrow.
Thanks for cutting these up for us all, so they can live on.
Mike
Posted via Mobile Device

Just let me know. I hate sending stuff to the scrap yard and then find out some one needed it. Thanks.

Pictures for red02chevy. He PM about core support mount brackets and SBC stands. Slight damage shown in the last picture. $67.35 for all 4 parts shipped to 48 states. Thanks

**Cash3481** · 09-02-2013, 09:37 PM

Todd,
My friend needs a REAR support if you have one. Price please.
My brother lives outside Marion, In. Zip is 46952. He's driving here next week.
If you send it to him, I'll paypal you the money for it.
If it saves some on shipping, if not send it to 67110.
Mike
Posted via Mobile Device

**Todd68Chevy** · 09-02-2013, 10:04 PM

Quote:

Originally Posted by Cash3481

Todd,
My friend needs a REAR support if you have one. Price please.
My brother lives outside Marion, In. Zip is 46952. He's driving here next week.
If you send it to him, I'll paypal you the money for it.
If it saves some on shipping, if not send it to 67110.
Mike
Posted via Mobile Device

Rear cab mount bracket? Right or left or are they the same? I will check them out tomorrow night but I should have some good ones between the 3 frames.

**Cash3481** · 09-02-2013, 11:15 PM

Quote:

Originally Posted by Todd68Chevy

Rear cab mount bracket? Right or left or are they the same? I will check them out tomorrow night but I should have some good ones between the 3 frames.

Todd,
Not sure if they're different? Both should fit in a FRB I think.
Just figure I need both since he didn't answer my calls today.
Mike
Posted via Mobile Device

68shortfleet · 09-02-2013, 11:28 PM

I could use a rear crossmember. The furthest one back that the taillight wiring grommet fits into. The one in the very first pic looks like it bend a little? Do you have a good one?

Price shipped to 97115?

red02chevy · 09-03-2013, 07:39 AM

Quote:

Originally Posted by Todd68Chevy

Pictures for red02chevy. He PM about core support mount brackets and SBC stands. Slight damage shown in the last picture. $67.35 for all 4 parts shipped to 48 states. Thanks

Pm sent

**Todd68Chevy** · 09-03-2013, 08:59 AM

Quote:

Originally Posted by Cash3481

Todd,
Not sure if they're different? Both should fit in a FRB I think.
Just figure I need both since he didn't answer my calls today.
Mike
Posted via Mobile Device

Probably will fit in a Medium box if they are not to tall. I will get them checked and off tonight after work. Thanks

Quote:

Originally Posted by 68shortfleet

I could use a rear crossmember. The furthest one back that the taillight wiring grommet fits into. The one in the very first pic looks like it bend a little? Do you have a good one?

Price shipped to 97115?

I believe you are right, that the one pictured is bent. I will check the other 2 tonight. Thanks

Quote:

Originally Posted by red02chevy

Pm sent

I will measure tonight. Do you just want the hole diameter or the length of the top? Thanks

red02chevy · 09-03-2013, 09:32 AM

Quote:

Originally Posted by Todd68Chevy

I will measure tonight. Do you just want the hole diameter or the length of the top? Thanks

hole diameter

Undone · 09-03-2013, 06:26 PM

I need a rear cab mount bracket, how much
shipped to 30530?

parkinglot · 09-03-2013, 07:21 PM

Not sure what its called, but the piece above the rear coil springs that looks like a piece of leaf spring riveted to the inside of the frame..do you have any? Thanks
Posted via Mobile Device

**Todd68Chevy** · 09-03-2013, 10:08 PM

Quote:

Originally Posted by Cash3481

Todd,
My friend needs a REAR support if you have one. Price please.
My brother lives outside Marion, In. Zip is 46952. He's driving here next week.
If you send it to him, I'll paypal you the money for it.
If it saves some on shipping, if not send it to 67110.
Mike
Posted via Mobile Device

Here are pictures of the best ones I have. I am not sure if they are different from side to side but I did notice that the bushing holes are not centered in the brackets on any of the brackets that I have. I am not sure if that will be an issue. Looks like it does make a difference in shipping. Your brothers zip is $8.85 but your zip is $11.50 FRB is actually higher. Let me know. Thanks

Quote:

Originally Posted by 68shortfleet

I could use a rear crossmember. The furthest one back that the taillight wiring grommet fits into. The one in the very first pic looks like it bend a little? Do you have a good one?

Price shipped to 97115?

Looks like I have the one that is bent up some and I have one the has rust build up at one of the rivets. I took pictures tonight but they did not save so I will need to take more tomorrow. Sorry. If either will work for you then I will cut it out and check the shipping. Thanks for asking

Quote:

Originally Posted by red02chevy

hole diameter

Looks like 1 5/8 inches. Let me know. Thanks

Quote:

Originally Posted by Undone

I need a rear cab mount bracket, how much
shipped to 30530?

Cash3481 has first chance. The ones pictured are the best ones I have. If he takes the ones pictured then I will get pictures of the others I have and see if they will work for you. Thanks

Quote:

Originally Posted by parkinglot

Not sure what its called, but the piece above the rear coil springs that looks like a piece of leaf spring riveted to the inside of the frame..do you have any? Thanks
Posted via Mobile Device

Are you talking about the double plate inside the frame rail? If so, I would guess they are all rusted but I will get pictures and we can go from there. Thanks.

**Cash3481** · 09-03-2013, 10:49 PM

Todd,
It's easier to just send them here. Please pm me your payment method and total. I'll get you paid promptly. Thanks!
Mike
Posted via Mobile Device

**Todd68Chevy** · 09-03-2013, 11:04 PM

Quote:

Originally Posted by Cash3481

Todd,
It's easier to just send them here. Please pm me your payment method and total. I'll get you paid promptly. Thanks!
Mike
Posted via Mobile Device

PM sent, Thanks

**Cash3481** · 09-03-2013, 11:19 PM

Todd,
Payment sent for frame mounts.
Thanks for everything!
Mike
Posted via Mobile Device

**Todd68Chevy** · 09-03-2013, 11:20 PM

Quote:

Originally Posted by Cash3481

Todd,
Payment sent for frame mounts.
Thanks for everything!
Mike
Posted via Mobile Device

Cab mounts pictured are sold. Payment received. Thanks again

68shortfleet · 09-04-2013, 12:43 AM

Quote:
Originally Posted by 68shortfleet View Post
I could use a rear crossmember. The furthest one back that the taillight wiring grommet fits into. The one in the very first pic looks like it bend a little? Do you have a good one?

Price shipped to 97115?
Looks like I have the one that is bent up some and I have one the has rust build up at one of the rivets. I took pictures tonight but they did not save so I will need to take more tomorrow. Sorry. If either will work for you then I will cut it out and check the shipping. Thanks for asking

I one is bent and the other is rusty, then lets not spent any of your time cutting them out and getting shipping quotes.
Thank you for checking them out for me.

parkinglot · 09-04-2013, 06:37 AM

I guesd thats what they are called..cant seem to find s description anywhere. See what yours look like..thanks!
Posted via Mobile Device

**Todd68Chevy** · 09-04-2013, 09:55 PM

Quote:

Originally Posted by Undone

I need a rear cab mount bracket, how much
shipped to 30530?

The first set pictured are sold but here are pictures of another pair that I have. The shipping will be $11.50 Let me know if interested and I will get them cut off. Thanks

Quote:

Originally Posted by parkinglot

Not sure what its called, but the piece above the rear coil springs that looks like a piece of leaf spring riveted to the inside of the frame..do you have any? Thanks
Posted via Mobile Device

Here is a few pictures of what I think you mean. The right side looks good but the left side has slight seperation between it and the frame rail. I am guessing they will weigh cross to the cab mount brackets so they should be around $52.00 shipped if interested

Quote:

Originally Posted by Cash3481

Todd,
Payment sent for frame mounts.
Thanks for everything!
Mike
Posted via Mobile Device

Mailed out today. Thanks

Quote:

Originally Posted by 68shortfleet

I could use a rear crossmember. The furthest one back that the taillight wiring grommet fits into. The one in the very first pic looks like it bend a little? Do you have a good one?

Price shipped to 97115?

Here are some pictures of the best one. See the rust build up at the left upper frame rivet. $15.00 plus shipping if interested.

**Todd68Chevy** · 09-04-2013, 09:57 PM

More pictures.

**Todd68Chevy** · 09-06-2013, 12:58 PM

I will be out of town tonight after work tonight thru Sunday afternoon and probably will not be around a computer.

**Todd68Chevy** · 09-10-2013, 12:45 PM

TTT still a lot of good parts available if you need them.

Quote:

Originally Posted by Undone

I need a rear cab mount bracket, how much
shipped to 30530?

Quote:

Originally Posted by parkinglot

Not sure what its called, but the piece above the rear coil springs that looks like a piece of leaf spring riveted to the inside of the frame..do you have any? Thanks
Posted via Mobile Device

Quote:

Originally Posted by red02chevy

Pm sent

Anybody still interested? Let me know.

09-01-2013, 10:17 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Frame parts- Parting out 3 LWB 2wd coil spring frames I have 3 LWB 2wd coil spring frames that are not good enough to use because of rust or other damage. Thought I would see if anybody need anything from them. The only items left on most of the frames are the riveted on parts but there are a few misc. parts also. Sorry but no shipping on large items. If I have a box and it will go UPS or USPS then I am ok but bigger than that then I can not ship. Let me know what you need pictures of. Respond to the thread as per rules. All prices are plus shipping cost. Bed mount brackets: $15.00 each Trailing arm brackets: $20.00 each Frame sections: starting at $20.00 and up Cab mount brackets: $20.00 each 72 front cross member with brakes, steering and p/s box (core) $200.00 Automatic Transmission crossmember: $40.00 Small block engine stands: $20.00 pair Exhaust hanger brackets: $15.00 each Custom T handle automatic shifter: Priceless Everything else: please ask Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

09-01-2013, 11:30 PM	#2
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames Todd, I have a friend that needs a front cab support... I think! I'll find out which on and message back here tomorrow. Thanks for cutting these up for us all, so they can live on. Mike Posted via Mobile Device

09-02-2013, 09:37 PM	#4
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames Todd, My friend needs a REAR support if you have one. Price please. My brother lives outside Marion, In. Zip is 46952. He's driving here next week. If you send it to him, I'll paypal you the money for it. If it saves some on shipping, if not send it to 67110. Mike Posted via Mobile Device

09-02-2013, 11:28 PM	#7
68shortfleet Registered User Join Date: Oct 2006 Location: Dundee, Oregon Posts: 311	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames I could use a rear crossmember. The furthest one back that the taillight wiring grommet fits into. The one in the very first pic looks like it bend a little? Do you have a good one? Price shipped to 97115?

09-03-2013, 06:26 PM	#11
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames I need a rear cab mount bracket, how much shipped to 30530?

09-03-2013, 07:21 PM	#12
parkinglot Registered User Join Date: Jul 2013 Location: pittsburgh, pa Posts: 54	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames Not sure what its called, but the piece above the rear coil springs that looks like a piece of leaf spring riveted to the inside of the frame..do you have any? Thanks Posted via Mobile Device __________________ 72 C-10 long bed 350 3OF 07 classic Z-71 xcab L-33

09-03-2013, 10:49 PM	#14
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames Todd, It's easier to just send them here. Please pm me your payment method and total. I'll get you paid promptly. Thanks! Mike Posted via Mobile Device

09-03-2013, 11:19 PM	#16
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames Todd, Payment sent for frame mounts. Thanks for everything! Mike Posted via Mobile Device

09-04-2013, 12:43 AM	#18
68shortfleet Registered User Join Date: Oct 2006 Location: Dundee, Oregon Posts: 311	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames Quote: Originally Posted by 68shortfleet View Post I could use a rear crossmember. The furthest one back that the taillight wiring grommet fits into. The one in the very first pic looks like it bend a little? Do you have a good one? Price shipped to 97115? Looks like I have the one that is bent up some and I have one the has rust build up at one of the rivets. I took pictures tonight but they did not save so I will need to take more tomorrow. Sorry. If either will work for you then I will cut it out and check the shipping. Thanks for asking I one is bent and the other is rusty, then lets not spent any of your time cutting them out and getting shipping quotes. Thank you for checking them out for me.

09-04-2013, 06:37 AM	#19
parkinglot Registered User Join Date: Jul 2013 Location: pittsburgh, pa Posts: 54	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames I guesd thats what they are called..cant seem to find s description anywhere. See what yours look like..thanks! Posted via Mobile Device __________________ 72 C-10 long bed 350 3OF 07 classic Z-71 xcab L-33

09-04-2013, 09:57 PM	#21
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames More pictures. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

09-06-2013, 12:58 PM	#22
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Frame parts- Parting out 3 LWB 2wd coil spring frames I will be out of town tonight after work tonight thru Sunday afternoon and probably will not be around a computer. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.