CA Van tilt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frijolito1988 · 08-29-2013, 01:43 AM

Selling this Van tilt, this thing is clean, no rust, looks like it might have been rebuilt ? Or repainted but this thing is really clean. Does not come with Steering wheel will sell for extra $.

$240.

1967wannabe · 08-29-2013, 01:20 PM

1) Are these a bolt-in replacement in our trucks?
2) What is the cost shipped to 77339?

Thanks

Frijolito1988 · 08-30-2013, 02:52 PM

Quote:

Originally Posted by 1967wannabe

1) Are these a bolt-in replacement in our trucks?
2) What is the cost shipped to 77339?

Thanks

It will have to be modified , but its not that hard at all,

I am estimating about $40-50 for shipping.

**70STOVEBOLT** · 08-31-2013, 09:11 AM

What needs to be modified on the column?

**70shortfleet** · 08-31-2013, 09:45 AM

Quote:

Originally Posted by 70STOVEBOLT

What needs to be modified on the column?

From what I see in the pictures, the column has already been set up for a truck install. Shorten the intermediate shaft and your good to go!

**396ci** · 08-31-2013, 05:06 PM

Quote:

Originally Posted by 70shortfleet

From what I see in the pictures, the column has already been set up for a truck install. Shorten the intermediate shaft and your good to go!

Sometimes the neutral safety switch hits the brake pedal assembly and either needs to be relocated lower on the column or not used at all (then a jumper wire has to be inserted in the plug). Just an fyi...

**leddzepp** · 08-31-2013, 05:57 PM

Quote:

Originally Posted by 396ci

Sometimes the neutral safety switch hits the brake pedal assembly and either needs to be relocated lower on the column or not used at all (then a jumper wire has to be inserted in the plug). Just an fyi...

If you look at the pictures you will see the NSS is in the correct lower position, like a truck tilt. The earlier van/RV tilts were like this.

1967wannabe · 09-03-2013, 11:58 AM

If you'll do an even $250, shipped, I'll take it.

1967wannabe · 09-04-2013, 12:24 PM

Payment sent

1967wannabe · 09-11-2013, 09:59 AM

Received the column yesterday, nice piece!!

Frijolito1988 · 09-11-2013, 12:03 PM

Quote:

Originally Posted by 1967wannabe

Received the column yesterday, nice piece!!

Glad you like it, its a really nice piece.

08-29-2013, 01:43 AM	#1
Frijolito1988 Registered User Join Date: Jul 2010 Location: So Cal Posts: 421	Van tilt Selling this Van tilt, this thing is clean, no rust, looks like it might have been rebuilt ? Or repainted but this thing is really clean. Does not come with Steering wheel will sell for extra $. $240.

08-29-2013, 01:20 PM	#2
1967wannabe Registered User Join Date: Aug 2011 Location: Houston TX Posts: 227	Re: Van tilt 1) Are these a bolt-in replacement in our trucks? 2) What is the cost shipped to 77339? Thanks

08-31-2013, 09:11 AM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: Van tilt What needs to be modified on the column? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-03-2013, 11:58 AM	#8
1967wannabe Registered User Join Date: Aug 2011 Location: Houston TX Posts: 227	Re: Van tilt If you'll do an even $250, shipped, I'll take it.

09-04-2013, 12:24 PM	#9
1967wannabe Registered User Join Date: Aug 2011 Location: Houston TX Posts: 227	Re: Van tilt Payment sent

09-11-2013, 09:59 AM	#10
1967wannabe Registered User Join Date: Aug 2011 Location: Houston TX Posts: 227	Re: Van tilt Received the column yesterday, nice piece!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.