lower trim ? and help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fast71 · 12-06-2003, 03:39 PM

Okay Tim Christian gave me a deal I couldnt refuse on a complete set of lower trim (new) . Now I 'm going to have to install it on a truck that didnt come with it . What is going to be the best way to get my marks to drill. I hate that word (drill). What size drill bit do I need? Has anyone done this ? HELP PLEASE!!!!!

Big Orange Thanks for the offer on the lower trim .if you still dont want it let me know I will still take it for backup.

**old Rusty C10** · 12-06-2003, 03:51 PM

id like it up on the door and see if ya can figure it out that way either that or go sit in the junkyard with a ruler and paper

Vince M · 12-06-2003, 08:06 PM

You could try just using the adhesive clips instead of drilling. Most vehicles nowadays are done that way. This would make lining up the trim alot easier. Just follow the body lines and forget about holes.

tom hand · 12-06-2003, 08:15 PM

The later trucks used the adhesive clips from the factory...on every thing except the front clip...go figure. All the pieces all held on at each end by a screw or bolt-in clip...I guess in case the adhesive fails...Makes it much easier on the bed and doors.

12-06-2003, 03:39 PM	#1
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	lower trim ? and help Okay Tim Christian gave me a deal I couldnt refuse on a complete set of lower trim (new) . Now I 'm going to have to install it on a truck that didnt come with it . What is going to be the best way to get my marks to drill. I hate that word (drill). What size drill bit do I need? Has anyone done this ? HELP PLEASE!!!!! Big Orange Thanks for the offer on the lower trim .if you still dont want it let me know I will still take it for backup. __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100

12-06-2003, 03:51 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	id like it up on the door and see if ya can figure it out that way either that or go sit in the junkyard with a ruler and paper __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-06-2003, 08:06 PM	#3
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	You could try just using the adhesive clips instead of drilling. Most vehicles nowadays are done that way. This would make lining up the trim alot easier. Just follow the body lines and forget about holes. __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

12-06-2003, 08:15 PM	#4
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	The later trucks used the adhesive clips from the factory...on every thing except the front clip...go figure. All the pieces all held on at each end by a screw or bolt-in clip...I guess in case the adhesive fails...Makes it much easier on the bed and doors. __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.