free running gmc 305 v6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69chevy lwb · 09-14-2013, 09:40 PM

i have a v6 out of my 1968 gmc that im looking to get rid of im replacing it with a 472 Cadillac and i hate to throw good parts away especially if someone can use them. any how its a gmc v6 it runs good doesn't smoke or knock. i rebuilt the carb, replaced the points and coil so it ran decent i didn't ever set the timing though as i only drove it 20 miles or so before tearing into the truck. i strongly recommend a new carb though as the throttle plate is worn out on this one and the accelerator pump doesn't work to good even after a rebuild. im located in evanston wy 82930 you can get a hold of me at 13076791730 i prefer not to ship unless you can make the arrangements
thanks,
Broc Easton

**chiefcfd** · 09-14-2013, 10:38 PM

I had one of those engines in a '63 GMC once. They have a ton of torque. By the way why is your master cylinder on the passenger side? You going for right hand drive?

69chevy lwb · 09-14-2013, 10:40 PM

I'm building a rhd truck haha I was wondering how long it would take for someone to catch on
Posted via Mobile Device

slow-1 · 09-14-2013, 10:57 PM

A right hand drive C-10 with a Caddi motor...this will be a cool ride for sure.

Nice gesture offering up your motor, hope someone can put it to good use.

67ChevyRedneck · 09-14-2013, 11:00 PM

Brakes on right side, steering on left... you must have some LONG arms and legs!

69chevy lwb · 09-14-2013, 11:24 PM

No long arms for me this truck gives a new twist on driving with friends! I hope someone can use the motor, and as for the truck I have porter built on the way so I couldn't justify swapping all the steering components yet
Posted via Mobile Device

**DreamRyder1963** · 09-14-2013, 11:31 PM

Do bad I'm not closer. If I was I would on this in a heartbeat

I love these engines.
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

69chevy lwb · 09-14-2013, 11:34 PM

If you can completely cover shipping its yours bud the only other taker I have just wants to blow it up I rather see it go to a good home but I can't keep it after I pull it
Posted via Mobile Device

Syndrome · 09-14-2013, 11:58 PM

If I needed a motor I would be on this. Would only cost me $200 in fuel, about 12 hours of drive time though.

truckster · 09-15-2013, 02:08 AM

I would enjoy having a 305 V6, but I really like being married to my wife, and she already thinks I have enough projects.

I had a 66 GMC and that was a great engine. It's really cool that you're willing to share.

69chevy lwb · 09-15-2013, 02:12 AM

Well just take her out for a nice dinner then it only costs you a dinner and no scorn!
Posted via Mobile Device

**chiefcfd** · 09-15-2013, 09:53 AM

That's what I love about this site. Everyone has different directions for their build. As you can see from my avatar I like being different too. People ask me why I wanted a Roadster. Because I can and it's mine. Just love whatever you're building. Good luck!

slow-1 · 09-15-2013, 10:20 AM

Quote:

Originally Posted by 69chevy lwb

If you can completely cover shipping its yours bud the only other taker I have just wants to blow it up I rather see it go to a good home but I can't keep it after I pull it
Posted via Mobile Device

If no one takes it on here, maybe try your local CL...surely someone local could put it to use...and not just ruin it for fun.

**DreamRyder1963** · 09-15-2013, 05:12 PM

Quote:

Originally Posted by 69chevy lwb

If you can completely cover shipping its yours bud the only other taker I have just wants to blow it up I rather see it go to a good home but I can't keep it after I pull it
Posted via Mobile Device

I'm going to contact some shipping companies tomorrow and see what they say.
Posted via Mobile Device

fp1967 · 09-15-2013, 05:32 PM

If you don't need the clutch linkage and are willing to ship it, I will buy it from you.

09-14-2013, 09:40 PM	#1
69chevy lwb Registered User Join Date: Mar 2012 Location: Evanston Posts: 304	free running gmc 305 v6 i have a v6 out of my 1968 gmc that im looking to get rid of im replacing it with a 472 Cadillac and i hate to throw good parts away especially if someone can use them. any how its a gmc v6 it runs good doesn't smoke or knock. i rebuilt the carb, replaced the points and coil so it ran decent i didn't ever set the timing though as i only drove it 20 miles or so before tearing into the truck. i strongly recommend a new carb though as the throttle plate is worn out on this one and the accelerator pump doesn't work to good even after a rebuild. im located in evanston wy 82930 you can get a hold of me at 13076791730 i prefer not to ship unless you can make the arrangements thanks, Broc Easton __________________ My Patinia'd 69 69-http://67-72chevytrucks.com/vboard/showthread.php?t=517537 My RHD 68 http://67-72chevytrucks.com/vboard/s...d.php?t=594928

09-14-2013, 10:38 PM	#2
chiefcfd Senior Member Join Date: Oct 2010 Location: Cadiz, Ky Posts: 514	Re: free running gmc 305 v6 I had one of those engines in a '63 GMC once. They have a ton of torque. By the way why is your master cylinder on the passenger side? You going for right hand drive? __________________ 1972 Chevy LWB Roadster 1999 Chevy Silverado 2wd 2015 Chevy High Country 4x4 Crew Cab

09-14-2013, 10:40 PM	#3
69chevy lwb Registered User Join Date: Mar 2012 Location: Evanston Posts: 304	Re: free running gmc 305 v6 I'm building a rhd truck haha I was wondering how long it would take for someone to catch on Posted via Mobile Device __________________ My Patinia'd 69 69-http://67-72chevytrucks.com/vboard/showthread.php?t=517537 My RHD 68 http://67-72chevytrucks.com/vboard/s...d.php?t=594928

09-14-2013, 10:57 PM	#4
slow-1 Registered User Join Date: May 2013 Location: Central NC Posts: 830	Re: free running gmc 305 v6 A right hand drive C-10 with a Caddi motor...this will be a cool ride for sure. Nice gesture offering up your motor, hope someone can put it to good use. __________________ 1972 Cheyene C-10 "Ole Green" My Grandfathers truck (early 70's to 1983) My first vehicle (1983) Original 350 (3 rebuilds) 700R4 from Bowtie Overdrives

09-14-2013, 11:00 PM	#5
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: free running gmc 305 v6 Brakes on right side, steering on left... you must have some LONG arms and legs! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-14-2013, 11:24 PM	#6
69chevy lwb Registered User Join Date: Mar 2012 Location: Evanston Posts: 304	Re: free running gmc 305 v6 No long arms for me this truck gives a new twist on driving with friends! I hope someone can use the motor, and as for the truck I have porter built on the way so I couldn't justify swapping all the steering components yet Posted via Mobile Device __________________ My Patinia'd 69 69-http://67-72chevytrucks.com/vboard/showthread.php?t=517537 My RHD 68 http://67-72chevytrucks.com/vboard/s...d.php?t=594928

09-14-2013, 11:31 PM	#7
DreamRyder1963 Senior Member Join Date: Jul 2012 Location: Knoxville, TN Posts: 499	Re: free running gmc 305 v6 Do bad I'm not closer. If I was I would on this in a heartbeat I love these engines. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device __________________ 1971 Chevy C10 Cheyenne (sold for Mazda) 1963 Chevy Corvair Pro-Touring Project 2012 Mazda 3 i Sport sedan http://www.dracoautodesigns.com/

09-14-2013, 11:34 PM	#8
69chevy lwb Registered User Join Date: Mar 2012 Location: Evanston Posts: 304	Re: free running gmc 305 v6 If you can completely cover shipping its yours bud the only other taker I have just wants to blow it up I rather see it go to a good home but I can't keep it after I pull it Posted via Mobile Device __________________ My Patinia'd 69 69-http://67-72chevytrucks.com/vboard/showthread.php?t=517537 My RHD 68 http://67-72chevytrucks.com/vboard/s...d.php?t=594928

09-14-2013, 11:58 PM	#9
Syndrome Registered User Join Date: Aug 2013 Location: Apple Valley, UT Posts: 143	Re: free running gmc 305 v6 If I needed a motor I would be on this. Would only cost me $200 in fuel, about 12 hours of drive time though. __________________ 1970 GMC

09-15-2013, 02:08 AM	#10
truckster Registered User Join Date: Jan 2001 Location: Orem, Utah Posts: 7,982	Re: free running gmc 305 v6 I would enjoy having a 305 V6, but I really like being married to my wife, and she already thinks I have enough projects. I had a 66 GMC and that was a great engine. It's really cool that you're willing to share.

09-15-2013, 02:12 AM	#11
69chevy lwb Registered User Join Date: Mar 2012 Location: Evanston Posts: 304	Re: free running gmc 305 v6 Well just take her out for a nice dinner then it only costs you a dinner and no scorn! Posted via Mobile Device __________________ My Patinia'd 69 69-http://67-72chevytrucks.com/vboard/showthread.php?t=517537 My RHD 68 http://67-72chevytrucks.com/vboard/s...d.php?t=594928

09-15-2013, 09:53 AM	#12
chiefcfd Senior Member Join Date: Oct 2010 Location: Cadiz, Ky Posts: 514	Re: free running gmc 305 v6 That's what I love about this site. Everyone has different directions for their build. As you can see from my avatar I like being different too. People ask me why I wanted a Roadster. Because I can and it's mine. Just love whatever you're building. Good luck! __________________ 1972 Chevy LWB Roadster 1999 Chevy Silverado 2wd 2015 Chevy High Country 4x4 Crew Cab

09-15-2013, 05:32 PM	#15
fp1967 Registered User Join Date: Aug 2012 Location: U.P. of Michigan Posts: 115	Re: free running gmc 305 v6 If you don't need the clutch linkage and are willing to ship it, I will buy it from you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.