dana 44 rebuild - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72shortbed12 · 11-26-2010, 02:47 AM

I've started to pull apart my front axle (dana 44) on my k10 but have never done it before. The ujoints on the axle shafts are shot. Are there any good writeups you guys could point me to. I've looked at a few online but there seems to be a few different setups.?

Thanks

swamp rat · 11-26-2010, 03:30 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=335976

Heres a start, might try the search feature for some key words too.

**Ridgeback** · 11-26-2010, 12:37 PM

If you post your email address I will send you a Spicer Axle Maintneance Manual for the Model 44 Axle.

swamp rat · 11-26-2010, 12:49 PM

Quote:

Originally Posted by Ridgeback

If you post your email address I will send you a Spicer Axle Maintneance Manual for the Model 44 Axle.

I'd love to have it myself! planning to rebuild this next summer.

**Ridgeback** · 11-27-2010, 01:09 AM

swamp rat:

Same offer, if you post your email I will email you a pdf copy.

swamp rat · 11-27-2010, 02:02 AM

Quote:

Originally Posted by Ridgeback

swamp rat:

Same offer, if you post your email I will email you a pdf copy.

Thanks, check your messages in your profile.

**Ridgeback** · 11-27-2010, 12:28 PM

72shortbed12 and swamp rat

Manual sent, let me know if you did not receive it.

72shortbed12 · 11-27-2010, 12:50 PM

I received it. Thanks a lot.

swamp rat · 11-27-2010, 02:08 PM

Quote:

Originally Posted by Ridgeback

72shortbed12 and swamp rat

Manual sent, let me know if you did not receive it.

Got it sitting in my hotmail no problem and can open it from there fine, but some reason its not letting me save it to my computer without getting an error, i'll try again later. Thanks!

SeventyOne · 11-27-2010, 06:14 PM

I would love the D44 manual also, Ridgeback - I'll PM you.

1972CST · 11-28-2010, 12:20 AM

I would also like that dana 44 pdf file. My e-mail is 1972cst@gmail.com
Thanks in advance!

centexan · 11-30-2010, 12:35 AM

If it's not too much of a hassle, I would love a copy as well.

frank_alb@yahoo.com

thanks so much.

LawMan02 · 12-02-2010, 10:55 PM

I would appreicate a copy also. Thanks in advance. Randy
metzrandy@hotmail.com

madsam1 · 02-20-2013, 09:17 PM

Ridgeback,
I would like Spicer Axle Maintneance Manual for the Model 44 Axle.
Thank you in advance

Duster · 02-21-2013, 02:23 AM

I have replaced the ujoints in my spicer cardan joint and my axels. I can't remember if the axels are like this, but the drive shaft ujoints are held inplace with a resin that you have to melt out. It makes for an exciting ujoint change. I replaced every ujoint in the truck, but can't remember if the axels were like that or not. I don't think they were.

swamp rat · 08-22-2013, 09:49 PM

Quote:

Originally Posted by Ridgeback

swamp rat:

Same offer, if you post your email I will email you a pdf copy.

Hi Ridgeback, do you still have this manual?

I don't have the email any more and since you sent it to me i lost my computer to a lightning strike electrical surge, can you send it to me again?

Thank you!
Swamp Rat.

Bigdav160 · 08-23-2013, 06:54 AM

Is it possible it's on the Dana-Spicer webpage?

**Ridgeback** · 08-23-2013, 11:34 AM

Swamp rat:

The manual on the website is the same one I sent you previously. If you can not get it off the website post your email and I will send it to you again.

swamp rat · 08-23-2013, 12:45 PM

Thanks guys! I actually figured that out after i posted.. I shoulda known!

Twisted78SS · 09-15-2013, 05:39 PM

I case anyone else wants that one or a few other manuals, I have them posted on my site, the axle manuals are here. http://www.2heeldrive.com/Chevrolet/...ion%2FAxles%2F

And a variety of goodies are here http://www.2heeldrive.com/Chevrolet/

Enjoy..
Posted via Mobile Device
Posted via Mobile Device

SoCalK20 · 09-15-2013, 11:08 PM

Twisted78SS,
Thanks for taking the time to do this. It will definitely come in handy.

swamp rat · 09-15-2013, 11:22 PM

Bookmarked too.

LONGHAIR · 09-16-2013, 06:14 PM

Quote:

Originally Posted by Duster

I have replaced the ujoints in my spicer cardan joint and my axels. I can't remember if the axels are like this, but the drive shaft ujoints are held inplace with a resin that you have to melt out. It makes for an exciting ujoint change. I replaced every ujoint in the truck, but can't remember if the axels were like that or not. I don't think they were.

The plastic resin is only in later model axles. But to help others who may be reading this, you do not have to melt that stuff out. It will shear off when you press the joint apart.

11-26-2010, 02:47 AM	#1
72shortbed12 Registered User Join Date: Feb 2010 Location: Santa Clara Utah Posts: 85	dana 44 rebuild I've started to pull apart my front axle (dana 44) on my k10 but have never done it before. The ujoints on the axle shafts are shot. Are there any good writeups you guys could point me to. I've looked at a few online but there seems to be a few different setups.? Thanks __________________ 1972 K10 4wd Swb 350, 4 speed, 205 t-case Sold 1971 Cheyenne 2wd Lwb 350 4 speed Sold 1972 K5 blazer 4WD auto A/C

11-26-2010, 03:30 AM	#2
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: dana 44 rebuild http://67-72chevytrucks.com/vboard/s...d.php?t=335976 Heres a start, might try the search feature for some key words too. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-26-2010, 12:37 PM	#3
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	Re: dana 44 rebuild If you post your email address I will send you a Spicer Axle Maintneance Manual for the Model 44 Axle.

11-27-2010, 01:09 AM	#5
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	Re: dana 44 rebuild swamp rat: Same offer, if you post your email I will email you a pdf copy.

11-27-2010, 12:28 PM	#7
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	Re: dana 44 rebuild 72shortbed12 and swamp rat Manual sent, let me know if you did not receive it.

11-27-2010, 12:50 PM	#8
72shortbed12 Registered User Join Date: Feb 2010 Location: Santa Clara Utah Posts: 85	Re: dana 44 rebuild I received it. Thanks a lot. __________________ 1972 K10 4wd Swb 350, 4 speed, 205 t-case Sold 1971 Cheyenne 2wd Lwb 350 4 speed Sold 1972 K5 blazer 4WD auto A/C

11-27-2010, 06:14 PM	#10
SeventyOne Registered User Join Date: Mar 2007 Location: Oakland, Ca Posts: 1,382	Re: dana 44 rebuild I would love the D44 manual also, Ridgeback - I'll PM you.

11-28-2010, 12:20 AM	#11
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 516	Re: dana 44 rebuild I would also like that dana 44 pdf file. My e-mail is 1972cst@gmail.com Thanks in advance!

11-30-2010, 12:35 AM	#12
centexan Registered User Join Date: Aug 2006 Location: Austin, Texas Posts: 167	Re: dana 44 rebuild If it's not too much of a hassle, I would love a copy as well. frank_alb@yahoo.com thanks so much. __________________ 1989 Chevy Suburban v1500

12-02-2010, 10:55 PM	#13
LawMan02 Junior Member Join Date: Nov 2005 Location: Saint Francisville, Louisiana Posts: 157	Re: dana 44 rebuild I would appreicate a copy also. Thanks in advance. Randy metzrandy@hotmail.com __________________ 1972 GMC K2500, stepside, stock 350, 4 speed. Former F/D truck with 32,000 miles, no rust. 1973 Jeep CJ 5, 304, 33's with side pipes 2008 GMC 2500HD, CC, SWB, D/A, SLT

02-20-2013, 09:17 PM	#14
madsam1 Registered User Join Date: Oct 2012 Location: Pollock Pines Posts: 23	Re: dana 44 rebuild Ridgeback, I would like Spicer Axle Maintneance Manual for the Model 44 Axle. Thank you in advance

02-21-2013, 02:23 AM	#15
Duster Registered User Join Date: Feb 2013 Location: Ada, OK Posts: 117	Re: dana 44 rebuild I have replaced the ujoints in my spicer cardan joint and my axels. I can't remember if the axels are like this, but the drive shaft ujoints are held inplace with a resin that you have to melt out. It makes for an exciting ujoint change. I replaced every ujoint in the truck, but can't remember if the axels were like that or not. I don't think they were.

08-23-2013, 06:54 AM	#17
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: dana 44 rebuild Is it possible it's on the Dana-Spicer webpage? __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

08-23-2013, 11:34 AM	#18
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	Re: dana 44 rebuild Swamp rat: The manual on the website is the same one I sent you previously. If you can not get it off the website post your email and I will send it to you again.

08-23-2013, 12:45 PM	#19
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: dana 44 rebuild Thanks guys! I actually figured that out after i posted.. I shoulda known! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's



Register or Log In To remove these advertisements.

09-15-2013, 05:39 PM	#20
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: dana 44 rebuild I case anyone else wants that one or a few other manuals, I have them posted on my site, the axle manuals are here. http://www.2heeldrive.com/Chevrolet/...ion%2FAxles%2F And a variety of goodies are here http://www.2heeldrive.com/Chevrolet/ Enjoy.. Posted via Mobile Device Posted via Mobile Device __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

09-15-2013, 11:08 PM	#21
SoCalK20 Registered User Join Date: Jan 2012 Location: San Diego, CA Posts: 25	Re: dana 44 rebuild Twisted78SS, Thanks for taking the time to do this. It will definitely come in handy.

09-15-2013, 11:22 PM	#22
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: dana 44 rebuild Bookmarked too. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

Register or Log In To remove these advertisements.