TX body trim sell-off extravaganza - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tlcrz1972 · 09-20-2013, 10:26 PM

picture 1: Rh & LH lower front fender and grill bowtie

picture 2: LH lower front fender trim

picture 3: LH lower front fender trim

picture 4: headlight attach rings sold

picture 5: lower RH long bed trim

more to follow:

tlcrz1972 · 09-20-2013, 10:30 PM

pictures #1, 2 & 3: lower longbed trim

picture #4: lower bed trim and door trim

Picture #5: overview shot

More to come:

tlcrz1972 · 09-20-2013, 10:34 PM

picture #1: Lower door trim

Picture #2: lower door trim and upper door trim and upper fender trim

Picture #3: upper fender trim

picture #4 & 5: upper longbed trim 1 piece sold 2 remain

more to come:

tlcrz1972 · 09-20-2013, 10:44 PM

pictures #1, 2, 3, 4 '71-'72 front windshield trim
I have enough for 2 full sets $85.00 plus shipping

and one extra LH and lower piece, $18.00 each

several corner and center clips $5.00 ea

Condition is good driver; some dents dings, scratches etc.

tlcrz1972 · 09-20-2013, 10:55 PM

pictures 1 & 2: rear cab divider trim (1 LH and 1 RH) $20.00 ea 1 set sold

One piece is damaged $5.00

And I have one cab divider center dividing piece sold

picture #3 & 4: longhorn LH fwd and LH rear lower trim

picture #5: longhorn upper trim (some bends, some dents, some screw holes)

more to follow:

tlcrz1972 · 09-20-2013, 11:00 PM

picture #1: lower fwd RH longhorn bed trim

picture #2, 3, 4: '68 longbed RH trim sold

more to follow:

tlcrz1972 · 09-20-2013, 11:04 PM

pictures 1, 2, 3: '68 longbed LH trim sold

picture 4: '69-72 rear light trim

That's most of it I may add a few more pictures later.

Thanks

09-20-2013, 11:00 PM	#6
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza picture #1: lower fwd RH longhorn bed trim picture #2, 3, 4: '68 longbed RH trim sold more to follow: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 10-11-2013 at 04:58 PM.

09-20-2013, 11:04 PM	#7
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza pictures 1, 2, 3: '68 longbed LH trim sold picture 4: '69-72 rear light trim That's most of it I may add a few more pictures later. Thanks Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 10-11-2013 at 04:57 PM. Reason: 68sold

09-20-2013, 10:26 PM	#1
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza picture 1: Rh & LH lower front fender and grill bowtie picture 2: LH lower front fender trim picture 3: LH lower front fender trim picture 4: headlight attach rings sold picture 5: lower RH long bed trim more to follow: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 10-11-2013 at 05:00 PM. Reason: sold

09-20-2013, 10:30 PM	#2
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza pictures #1, 2 & 3: lower longbed trim picture #4: lower bed trim and door trim Picture #5: overview shot More to come: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

09-20-2013, 10:34 PM	#3
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza picture #1: Lower door trim Picture #2: lower door trim and upper door trim and upper fender trim Picture #3: upper fender trim picture #4 & 5: upper longbed trim 1 piece sold 2 remain more to come: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 10-11-2013 at 05:00 PM.

09-20-2013, 10:44 PM	#4
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza pictures #1, 2, 3, 4 '71-'72 front windshield trim I have enough for 2 full sets $85.00 plus shipping and one extra LH and lower piece, $18.00 each several corner and center clips $5.00 ea Condition is good driver; some dents dings, scratches etc. Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

09-20-2013, 10:55 PM	#5
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: body trim sell-off extravaganza pictures 1 & 2: rear cab divider trim (1 LH and 1 RH) $20.00 ea 1 set sold One piece is damaged $5.00 And I have one cab divider center dividing piece sold picture #3 & 4: longhorn LH fwd and LH rear lower trim picture #5: longhorn upper trim (some bends, some dents, some screw holes) more to follow: Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 10-11-2013 at 04:59 PM. Reason: sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.