King Ranch seats in a C-10?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wrbenson · 09-21-2013, 02:07 AM

Anyone tried this? I saw a few thread beginnings but no responses. I'm rebuilding a 68 stepside, and just ordered some with a console off eBay. Any knowledge is greatly appreciated.

msgdsrf · 09-21-2013, 09:02 AM

Think it's a good idea, I like those seats.

rustylew · 09-21-2013, 10:21 AM

I would love to see some as well.
Posted via Mobile Device

wrbenson · 09-23-2013, 04:16 AM

J guess I'll be blazing the trail. I'll take pics and notes!

**bigmac73** · 09-23-2013, 06:53 AM

can i ask what you paid for the seat, and we are waiting for the pics

PanelDeland · 09-23-2013, 08:46 AM

I want to see pics.I think you'll find that the seat backs are too thick to give you enough room between them and the wheel but they are super comfy.The only other thing I can think of is the reaction when people see you using "Furd" parts.

Flick · 09-23-2013, 10:03 AM

I really looked into this myself as well. I obviously would look into purchasing a nice leather conditioner and removing the KR logo's right in the middle. Depending on how old they are you might want to keep the logo, as the color difference would look really tacky. Good luck and I would like to see how they fit

wrbenson · 09-23-2013, 10:15 AM

I got the seats and console for $1000. They should be waiting for me when I finish the trip I'm on now. I feel like a kid at Christmas! I'm hoping they fit. They're not really that thick.

Flick · 09-24-2013, 04:20 AM

I dont know why I was assuming they were the rear seats. The front bucket seats look like they shouldn't have too many issues with size. They actually look really low to the ground too, did you remove the brackets or any of the bottom support?

wrbenson · 09-25-2013, 09:59 AM

Nope, that's how they came. The cab floor of a F250 must have a vertical ridge along the front as the bracket is vertical. I'll have to fab something to bolt it to our flat floorboard. I thought about getting a seat of the rear seats because I think they're a little thinner, but they also don't have the armrests. Picked the seats up yesterday. THe driver's is gonna need new skin before installing. The leather is in pretty poor shape in that blackened area.

09-21-2013, 02:07 AM	#1
wrbenson Registered User Join Date: Oct 2009 Location: Nashville TN Posts: 10	King Ranch seats in a C-10?? Anyone tried this? I saw a few thread beginnings but no responses. I'm rebuilding a 68 stepside, and just ordered some with a console off eBay. Any knowledge is greatly appreciated.

09-21-2013, 09:02 AM	#2
msgdsrf Registered User Join Date: Jul 2012 Location: White Salmon, WA Posts: 263	Re: King Ranch seats in a C-10?? Think it's a good idea, I like those seats.

09-21-2013, 10:21 AM	#3
rustylew Registered User Join Date: Jan 2013 Location: Queen Creek AZ Posts: 97	Re: King Ranch seats in a C-10?? I would love to see some as well. Posted via Mobile Device

09-23-2013, 04:16 AM	#4
wrbenson Registered User Join Date: Oct 2009 Location: Nashville TN Posts: 10	Re: King Ranch seats in a C-10?? J guess I'll be blazing the trail. I'll take pics and notes!

09-23-2013, 06:53 AM	#5
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: King Ranch seats in a C-10?? can i ask what you paid for the seat, and we are waiting for the pics __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

09-23-2013, 08:46 AM	#6
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: King Ranch seats in a C-10?? I want to see pics.I think you'll find that the seat backs are too thick to give you enough room between them and the wheel but they are super comfy.The only other thing I can think of is the reaction when people see you using "Furd" parts. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

09-23-2013, 10:03 AM	#7
Flick Registered User Join Date: Jul 2013 Location: Suisun City, CA Posts: 359	Re: King Ranch seats in a C-10?? I really looked into this myself as well. I obviously would look into purchasing a nice leather conditioner and removing the KR logo's right in the middle. Depending on how old they are you might want to keep the logo, as the color difference would look really tacky. Good luck and I would like to see how they fit __________________ My build

09-23-2013, 10:15 AM	#8
wrbenson Registered User Join Date: Oct 2009 Location: Nashville TN Posts: 10	Re: King Ranch seats in a C-10?? I got the seats and console for $1000. They should be waiting for me when I finish the trip I'm on now. I feel like a kid at Christmas! I'm hoping they fit. They're not really that thick. Attached Images

09-24-2013, 04:20 AM	#9
Flick Registered User Join Date: Jul 2013 Location: Suisun City, CA Posts: 359	Re: King Ranch seats in a C-10?? I dont know why I was assuming they were the rear seats. The front bucket seats look like they shouldn't have too many issues with size. They actually look really low to the ground too, did you remove the brackets or any of the bottom support? __________________ My build

09-25-2013, 09:59 AM	#10
wrbenson Registered User Join Date: Oct 2009 Location: Nashville TN Posts: 10	Re: King Ranch seats in a C-10?? Nope, that's how they came. The cab floor of a F250 must have a vertical ridge along the front as the bracket is vertical. I'll have to fab something to bolt it to our flat floorboard. I thought about getting a seat of the rear seats because I think they're a little thinner, but they also don't have the armrests. Picked the seats up yesterday. THe driver's is gonna need new skin before installing. The leather is in pretty poor shape in that blackened area.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.