AZ 4 tilt steering columns Manual and Automatic - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 07-11-2013, 03:52 PM

I have 4 tilt steering columns for sale. All columns include lower floor plates and also have wiper modules if originally equipped(84-87 columns) These are priced according to the amount of work I have into them and how hard each one is to come by. FREE INTERMEDIATE SHAFTS ARE WITH PURCHASE OF COLUMN AND FIRST COME FIRST SERVED AS I NORMALLY DON'T PURCHASE THESE WITH COLUMNS
1) Is a nice AUTOMATIC tilt column removed from a 83. It is correct for 1979-1983 but will work on 1973-1978 if you use the later intermediate shaft (I can include for free at the cost of shipping) It is in VERY good shape upper collars(interior side) have been sanded and repainted. There is No play and bearings have been regreased. Key is included. $190 not including shipping

2)Is a nice AUTOMATIC tilt column removed from a 1987 Suburban. It will work on 1984 and newer squarebodies. It is in very good shape with no play. Bearings have been regreased. Key is included. Price is $150 not including shipping.

3)Is a nice MANUAL FLOOR SHIFT tilt column removed from a 1982 truck. It is correct for 1979-1983 but will work on 1973-1978 if you use the later intermediate shaft.(I can include for free at the cost of shipping) It is in very good shape and has had the bearings regreased and has no play. Key is included. Price is $275 not including shipping.

4)SOLD! Thanks Hamad! Is a COMPLETELY REBUILT MANUAL FLOOR SHIFT tilt column. This is correct for 84 and newer Squarebody trucks. This has been disassembled down to every last nut and bolt. Floor shift tilt steering columns are known for the lower collars/bowls being cracked. This one does NOT have this problem! If you need to buy just this piece new it will run $172! I have a lot of experience rebuilding these so you can be assured that it was done correctly. Key is included. Price is $325 not including shipping.

hamad · 07-11-2013, 09:30 PM

any chance the 4th column is a manual floor shift tilt column for a 84-87 ?

solidaxel · 07-12-2013, 08:41 AM

Quote:

Originally Posted by 1774btcrew

I have 4 tilt steering columns for sale. These are priced according to the amount of work I have into them and how hard each one is to come by. FREE INTERMEDIATE SHAFTS ARE WITH PURCHASE OF COLUMN AND FIRST COME FIRST SERVED AS I NORMALLY DON'T PURCHASE THESE WITH COLUMNS
1) Is a nice AUTOMATIC tilt column removed from a 83. It is correct for 1979-1983 but will work on 1973-1978 if you use the later intermediate shaft (I can include for free at the cost of shipping) It is in VERY good shape upper collars(interior side) have been sanded and repainted. There is No play and bearings have been regreased. Key is included. $175 not including shipping

2)Is a nice AUTOMATIC tilt column removed from a 1987 Suburban. It will work on 1984 and newer squarebodies. It is in very good shape with no play. Bearings have been regreased. Key is included. Price is $150 not including shipping.

3)Is a nice MANUAL FLOOR SHIFT tilt column removed from a 1982 truck. It is correct for 1979-1983 but will work on 1973-1978 if you use the later intermediate shaft.(I can include for free at the cost of shipping) It is in very good shape and has had the bearings regreased and has no play. Key is included. Price is $275 not including shipping.

I am down the road from you and will be in Phoenix in a few weeks, where are you located.
Thanks

**1774btcrew** · 07-12-2013, 08:53 AM

Quote:

Originally Posted by solidaxel

I am down the road from you and will be in Phoenix in a few weeks, where are you located.
Thanks

I am in Glendale. Where are you located?
Posted via Mobile Device

solidaxel · 07-12-2013, 10:39 AM

Quote:

Originally Posted by 1774btcrew

I am in Glendale. Where are you located?
Posted via Mobile Device

Oro Valley

**1774btcrew** · 07-12-2013, 11:05 AM

I was hoping you were the other direction towards Prescott as I am heading there tomorrow. Which column were you interested in? I have a few others as well.
Posted via Mobile Device

JNJchev77 · 07-13-2013, 11:17 PM

PM Sent

**1774btcrew** · 07-15-2013, 10:41 AM

Quote:

Originally Posted by hamad

any chance the 4th column is a manual floor shift tilt column for a 84-87 ?

Hamad, I sent you a text and didn't hear back. The 4th column is a manual floor shift tilt for the 84-87s. I just added pictures.

**1774btcrew** · 07-26-2013, 12:10 AM

Ttt

**1774btcrew** · 08-20-2013, 03:30 PM

ttt

Valhalla · 09-26-2013, 01:19 AM

I am local may need the one for a 79 GMC

**1774btcrew** · 09-26-2013, 09:54 AM

Quote:

Originally Posted by Valhalla

I am local may need the one for a 79 GMC

Local pick up is more than welcome. I have actually sold that one but am in the process of building another one for a 79 and it should be done today or tomorrow. I will send you a PM with my email address

07-11-2013, 03:52 PM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	4 tilt steering columns Manual and Automatic I have 4 tilt steering columns for sale. All columns include lower floor plates and also have wiper modules if originally equipped(84-87 columns) These are priced according to the amount of work I have into them and how hard each one is to come by. FREE INTERMEDIATE SHAFTS ARE WITH PURCHASE OF COLUMN AND FIRST COME FIRST SERVED AS I NORMALLY DON'T PURCHASE THESE WITH COLUMNS 1) Is a nice AUTOMATIC tilt column removed from a 83. It is correct for 1979-1983 but will work on 1973-1978 if you use the later intermediate shaft (I can include for free at the cost of shipping) It is in VERY good shape upper collars(interior side) have been sanded and repainted. There is No play and bearings have been regreased. Key is included. $190 not including shipping 2)Is a nice AUTOMATIC tilt column removed from a 1987 Suburban. It will work on 1984 and newer squarebodies. It is in very good shape with no play. Bearings have been regreased. Key is included. Price is $150 not including shipping. 3)Is a nice MANUAL FLOOR SHIFT tilt column removed from a 1982 truck. It is correct for 1979-1983 but will work on 1973-1978 if you use the later intermediate shaft.(I can include for free at the cost of shipping) It is in very good shape and has had the bearings regreased and has no play. Key is included. Price is $275 not including shipping. 4)SOLD! Thanks Hamad! Is a COMPLETELY REBUILT MANUAL FLOOR SHIFT tilt column. This is correct for 84 and newer Squarebody trucks. This has been disassembled down to every last nut and bolt. Floor shift tilt steering columns are known for the lower collars/bowls being cracked. This one does NOT have this problem! If you need to buy just this piece new it will run $172! I have a lot of experience rebuilding these so you can be assured that it was done correctly. Key is included. Price is $325 not including shipping. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck. Last edited by 1774btcrew; 09-26-2013 at 09:52 AM.

07-11-2013, 09:30 PM	#2
hamad Registered User Join Date: Jan 2012 Location: DE Posts: 296	Re: 4 tilt steering columns Manual and Automatic any chance the 4th column is a manual floor shift tilt column for a 84-87 ? __________________ 1987 BLACK GMC C10 shortbed stepside, red interior , LS2, T-56 1982 WHITE GMC Jimmy FULLY convertible, red interior, 4X4, 454, SM465, 1000 KMs ONLY 1977 BRONZE GMC C10 longbed stepside, tan interior, LQ9, 4L65E 1979 RED GMC Street Coupe shortbed stepside, red interior, 454, Turbo 400 1991 GREY and BLACK Chevy Suburban, red interior, 454 tbi, 700r4 1985 BROWN Chevy C20 longbed fleetside, tan inteior, 454, Turbo 400

07-12-2013, 11:05 AM	#6
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: 4 tilt steering columns Manual and Automatic I was hoping you were the other direction towards Prescott as I am heading there tomorrow. Which column were you interested in? I have a few others as well. Posted via Mobile Device __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

07-13-2013, 11:17 PM	#7
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: 4 tilt steering columns Manual and Automatic PM Sent __________________ 77' Chevy SB Dropmembered Front and Rear 5.3/4l60e combo

07-26-2013, 12:10 AM	#9
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: 4 tilt steering columns Manual and Automatic Ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

08-20-2013, 03:30 PM	#10
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: 4 tilt steering columns Manual and Automatic ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

09-26-2013, 01:19 AM	#11
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: 4 tilt steering columns Manual and Automatic I am local may need the one for a 79 GMC __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.