![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
![]()
I have a set of '71 1/2 ton axles for sale. They are a D44 and 12 bolt with 3:73 gears. The D44 is open and completely stock, except for the '77 non-flat top knuckles. The 12B has Richmond gears and an Auburn Pro-Series limited slip.
I would like to get $300 for the pair, I have alot more than that in the 12B. Both of these axles could be freshened up, they are in driveable condition now. I can get pics if needed. These would be the perfect addition to a pre-71 truck because of the disk brakes, or to you guys with 3:08 gears. I am willing to drive 150-200 or so miles to meet you if needed. These are located in Clinton, IA 52732. I am willing to strap them to a pallet for shipping, but that is a last resort. I would like to find a local buyer if possible. Thanks for looking! ![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. Last edited by Beast388; 10-14-2003 at 11:19 AM. |
![]() |
![]() |
![]() |
#2 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
TTT
Make me an offer?
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2003
Location: Stillwater MN
Posts: 1,166
|
What do you mean by freshened up?? Seal leaks? shoes,drums wornout? Ball joints loose? Front shaft u-joints?
__________________
69 GMC K10 ..some restoration required....still.. ![]() |
![]() |
![]() |
![]() |
#4 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
The 12 bolt needs a pinion seal. The area is moist from gear lube but no drips on the driveway. Other than that, maybe a coat of paint.
![]() The Dana 44 will need balljoints, inner axle seals, and brake calipers. Included is the stock steering arm. Like mentioned above, these axles are in driveable condition but could use a few things to be perfect. ![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#5 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
TTT
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#6 |
Currently Blazerless
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,826
|
Sent you a PM.
__________________
1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C |
![]() |
![]() |
![]() |
#7 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
TTTA
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#8 |
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
would you be willing to sell the 12B by itself? If so how much?
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
![]() |
![]() |
![]() |
#9 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
I would be willing separate the axles if anyone is interested. For the 12bolt only I would take $250. It has the majority of the new parts.
![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#10 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
Make me an offer?
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#11 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
TTTAA
![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#12 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
TOP
These axles are ready and waiting for anyone interested. I will entertain any offers. ![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#13 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
TTT
Sale pending on the front axle. ![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#14 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
Top again
Anyone need a rear 12 bolt?
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jun 2001
Location: Eastern Kansas
Posts: 488
|
Obious assumption is that the 12 bolt is from a 4x4 with leaf springs. Are the leaf spring mounts the same on a 4x4 as a 2wd with rear leaf springs?
Thanks, Randy
__________________
'72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350 |
![]() |
![]() |
![]() |
#16 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
Nope, the 4wd's and 2wd's have different spacing. This axle has a perch spacing of 40" center to center whereas the 2wd's spacing is 42.5"
You could always cut off the old and weld on new perches. ![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#17 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
To the Top......again.
![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jun 2001
Location: Eastern Kansas
Posts: 488
|
PM sent
__________________
'72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350 |
![]() |
![]() |
![]() |
#19 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
PM returned.
![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#20 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
Front axle is sold......
Rear LSD & Gears sale pending..... Thanks to everyone for looking! ![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#21 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
LSD & Gears are sold.:p
Does anyone need a 12 bolt housing or axle shafts? Make offer. ![]()
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
Bookmarks |
|
|