IL Parting out a 1969 Chevy c10 with a 67 front clip - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1971ChevyTruck · 06-25-2013, 02:33 PM

The molding on the cab and bed was installed with pop rivets, but is in ok shape. The moldings on the front clip is in good shape. The arm rest on the passenger side is in great shape.

1971ChevyTruck · 06-25-2013, 02:38 PM

camcury how about $12 shipped for the horn button and horn parts?

Amashal, how about $50 shipped for both emblems and hood letters

59bones how about $35 for the trim if you pick it up?

69mod the heater control is in pretty good shape, but missing two of the knobs. It slide freely, I would go $30 shipped

1971ChevyTruck · 06-25-2013, 02:43 PM

I am going to ask for $100 + shipping for the grill, trim rings, bezzels

Dirt's72 · 06-25-2013, 02:47 PM

Did you ever find out which motor you had in there? Looking for the l6 linkage.
Posted via Mobile Device

1971ChevyTruck · 06-25-2013, 02:51 PM

I didn't see anything in the glove compartment, so I don't know for sure

amashal · 06-25-2013, 02:58 PM

Quote:

Originally Posted by 1971ChevyTruck

camcury how about $12 shipped for the horn button and horn parts?

Amashal, how about $50 shipped for both emblems and hood letters

59bones how about $35 for the trim if you pick it up?

69mod the heater control is in pretty good shape, but missing two of the knobs. It slide freely, I would go $30 shipped

I'll take the emblems and letters for $50. Let me know how you want payment.
Posted via Mobile Device

amashal · 06-25-2013, 03:01 PM

Quote:

Originally Posted by 1971ChevyTruck

I am going to ask for $100 + shipping for the grill, trim rings, bezzels

I think there's a couple ahead of me on these but I will take the trim rings and light bezels if it gets to me.
Posted via Mobile Device

1971ChevyTruck · 06-25-2013, 03:14 PM

amashal PM sent

junkyard · 06-25-2013, 03:22 PM

Quote:

Originally Posted by 1971ChevyTruck

I am going to ask for $100 + shipping for the grill, trim rings, bezzels

Ok.
I think I'm 2nd after Rob.
Let me know if he passes.-
-

Thanks
Ken

amashal · 06-25-2013, 04:12 PM

Payment sent for fender emblems and hood letters.

Thanks,

Alex

Hardesty454 · 06-25-2013, 08:55 PM

Payment sent for grille, hoops and bezels! Thanks again!

grayw0lf · 06-25-2013, 09:12 PM

Power brakes? How much for the booster bracket ass'y?

*Gregg* · 06-25-2013, 10:16 PM

How much for the ft & rear marker lights/reflectors & gaskets. I also need the chrome trim ring that goes behind the wiper knob. Let me know the condition & price if these items are still available. Thanks!
Posted via Mobile Device

*Gregg* · 06-25-2013, 10:24 PM

Im also interested in the door locks & ignition if you have the keys.
Posted via Mobile Device

Spartan · 06-25-2013, 11:50 PM

Thanks for the pics
Sorry for the impatience
I'm going to have to pass

Thanks again
Posted via Mobile Device

camrycurt · 06-26-2013, 09:40 AM

Quote:

Originally Posted by 1971ChevyTruck

camcury how about $12 shipped for the horn button and horn parts?

Yep, I'll take the horn button and all of the horn parts for $12 shipped. PM sent for payment instructions.

Thanks!

59bones · 06-26-2013, 12:49 PM

59bones how about $35 for the trim if you pick it up?

PM sent. Sounds like a road trip...

**DaHos** · 06-27-2013, 06:46 AM

Quote:

Originally Posted by DaHos

Interested in the following
Arm rests
Visors
Door mirrors w arms, backing plates and screws.
Steering wheel

Pending photos, price, condition and shipping.

PS: I'm pretty sure you have yourself a 68'

More info on the Visors, condition, price, etc....

Also and luck on the other items?

Billett · 06-27-2013, 10:11 PM

Does it have a two piece steering shaft? I'm looking for the intermediate shaft, between the column and the rag joint.
Posted via Mobile Device

1972cheyenne454 · 10-24-2013, 08:27 PM

What kind of shape is the frame in? And if its in good shape, what would you want for it?

ontrak12 · 10-24-2013, 08:58 PM

Hello interested in door panels shipped to 28409 how much thanks Bill

*low&slow* · 10-25-2013, 01:53 AM

Wondering if you still have the hood? If so how much for shipping to 83634?

broken 68 chevy · 10-25-2013, 05:28 AM

how much for the ebrake handle shipped to 19943?

06-25-2013, 02:33 PM	#51
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip The molding on the cab and bed was installed with pop rivets, but is in ok shape. The moldings on the front clip is in good shape. The arm rest on the passenger side is in great shape.

06-25-2013, 02:38 PM	#52
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip camcury how about $12 shipped for the horn button and horn parts? Amashal, how about $50 shipped for both emblems and hood letters 59bones how about $35 for the trim if you pick it up? 69mod the heater control is in pretty good shape, but missing two of the knobs. It slide freely, I would go $30 shipped

06-25-2013, 02:43 PM	#53
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip I am going to ask for $100 + shipping for the grill, trim rings, bezzels

06-25-2013, 02:47 PM	#54
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Parting out a 1969 Chevy c10 with a 67 front clip Did you ever find out which motor you had in there? Looking for the l6 linkage. Posted via Mobile Device

06-25-2013, 02:51 PM	#55
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip I didn't see anything in the glove compartment, so I don't know for sure

06-25-2013, 03:14 PM	#58
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip amashal PM sent

06-25-2013, 04:12 PM	#60
amashal Registered User Join Date: Mar 2008 Location: Allen,TX Posts: 223	Re: Parting out a 1969 Chevy c10 with a 67 front clip Payment sent for fender emblems and hood letters. Thanks, Alex

06-25-2013, 08:55 PM	#61
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip Payment sent for grille, hoops and bezels! Thanks again! __________________ Rob 1971 c10 - ground up in progress Tripp's Speed Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=589750

06-25-2013, 09:12 PM	#62
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	Re: Parting out a 1969 Chevy c10 with a 67 front clip Power brakes? How much for the booster bracket ass'y? __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

06-25-2013, 10:16 PM	#63
Gregg Registered User Join Date: May 2013 Location: Pittsburgh,PA Posts: 34	Re: Parting out a 1969 Chevy c10 with a 67 front clip How much for the ft & rear marker lights/reflectors & gaskets. I also need the chrome trim ring that goes behind the wiper knob. Let me know the condition & price if these items are still available. Thanks! Posted via Mobile Device

06-25-2013, 10:24 PM	#64
Gregg Registered User Join Date: May 2013 Location: Pittsburgh,PA Posts: 34	Re: Parting out a 1969 Chevy c10 with a 67 front clip Im also interested in the door locks & ignition if you have the keys. Posted via Mobile Device

06-25-2013, 11:50 PM	#65
Spartan Registered User Join Date: Dec 2012 Location: Backwoods, OR Posts: 888	Re: Parting out a 1969 Chevy c10 with a 67 front clip Thanks for the pics Sorry for the impatience I'm going to have to pass Thanks again Posted via Mobile Device __________________ '69 K20 350/4 speed/Rockwell/D44/HO52. "orange rhymes with door hinge"

06-26-2013, 12:49 PM	#67
59bones Registered User Join Date: Sep 2011 Location: Elgin Illinois Posts: 143	Re: Parting out a 1969 Chevy c10 with a 67 front clip 59bones how about $35 for the trim if you pick it up? PM sent. Sounds like a road trip...

06-27-2013, 10:11 PM	#69
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: Parting out a 1969 Chevy c10 with a 67 front clip Does it have a two piece steering shaft? I'm looking for the intermediate shaft, between the column and the rag joint. Posted via Mobile Device __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

10-24-2013, 08:27 PM	#70
1972cheyenne454 Registered User Join Date: Mar 2013 Location: Middle-a-nowhere, USA Posts: 63	Re: Parting out a 1969 Chevy c10 with a 67 front clip What kind of shape is the frame in? And if its in good shape, what would you want for it? __________________ 1972 Cheyenne, 350/th350 12bolt posi, shift kit, 262 Craine Cam, Pertronix HEI. "When the power of love overcomes the love of power, only then will the world know peace." "Who are you people and where is my horse?"



Register or Log In To remove these advertisements.

10-24-2013, 08:58 PM	#71
ontrak12 Registered User Join Date: Jul 2013 Location: wilmington North Carolina Posts: 27	Re: Parting out a 1969 Chevy c10 with a 67 front clip Hello interested in door panels shipped to 28409 how much thanks Bill

10-25-2013, 01:53 AM	#72
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: Parting out a 1969 Chevy c10 with a 67 front clip Wondering if you still have the hood? If so how much for shipping to 83634?

10-25-2013, 05:28 AM	#73
broken 68 chevy Registered User Join Date: Oct 2013 Location: felton de Posts: 44	Re: Parting out a 1969 Chevy c10 with a 67 front clip how much for the ebrake handle shipped to 19943?

Register or Log In To remove these advertisements.