MA Console and choke spring/stove - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Thealien** · 10-24-2013, 12:24 PM

I had bought this console planning on restoring for my Jimmy. I stripped it and repaired a couple small cracks pictured with Marine Tex epoxy. What you see is what you get the screws, hinge, latch, tether, stainless reproduction trim that the ashtry fits into, and both the original ashtray and a repop. I am including 2 trim pieces one is rusty (paint or rechrome) and one looks like it will polish up nice. I want $175 shipped for everything in the photos shipped.

Seperately I have the choke spring assembly that bolts to the manifold. Spring, screw and plastic insert included for $25 shipped

Postal Money Order or Paypal +3% and the first to say I'll take it in this thread gets it.

And the Choke parts

**WIDESIDE72** · 10-24-2013, 01:51 PM

Interested in choke parts pending info. Is it for a 2bbl or quadrajet and is e erything there to make it work?

**Thealien** · 10-24-2013, 02:02 PM

It was from a quadrajet that I removed from my vehicle. The metal box fits over the bimetal spring and then bolts to the manifold with that scew. I believe the plastic part goes in a hole on the quadrajet and then the arm of the choke goes into the plastic part. I am not sure if the spring was part of it or not. When I remove things I put everything in a ziploc.

I just know some people look for these from time to time?

**Thealien** · 10-25-2013, 06:26 AM

TTT Bump

**WIDESIDE72** · 10-25-2013, 07:39 AM

Thanks for the info. I have decided to go with an electric choke conversion. Your price is more than reasonable, though.

**Thealien** · 10-25-2013, 09:22 AM

No problem, thanks for the bump. This is more for someone trying to do a restoration.

**Thealien** · 10-26-2013, 02:29 PM

Bump for a nice restorable console with all the parts incuded.

**Thealien** · 10-28-2013, 06:49 AM

Ttt

10-24-2013, 12:24 PM	#1
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Console and choke spring/stove I had bought this console planning on restoring for my Jimmy. I stripped it and repaired a couple small cracks pictured with Marine Tex epoxy. What you see is what you get the screws, hinge, latch, tether, stainless reproduction trim that the ashtry fits into, and both the original ashtray and a repop. I am including 2 trim pieces one is rusty (paint or rechrome) and one looks like it will polish up nice. I want $175 shipped for everything in the photos shipped. Seperately I have the choke spring assembly that bolts to the manifold. Spring, screw and plastic insert included for $25 shipped Postal Money Order or Paypal +3% and the first to say I'll take it in this thread gets it. And the Choke parts __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

10-24-2013, 01:51 PM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Console and choke spring/stove Interested in choke parts pending info. Is it for a 2bbl or quadrajet and is e erything there to make it work?

10-24-2013, 02:02 PM	#3
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Console and choke spring/stove It was from a quadrajet that I removed from my vehicle. The metal box fits over the bimetal spring and then bolts to the manifold with that scew. I believe the plastic part goes in a hole on the quadrajet and then the arm of the choke goes into the plastic part. I am not sure if the spring was part of it or not. When I remove things I put everything in a ziploc. I just know some people look for these from time to time? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

10-25-2013, 06:26 AM	#4
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Console and choke spring/stove TTT Bump __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

10-25-2013, 07:39 AM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Console and choke spring/stove Thanks for the info. I have decided to go with an electric choke conversion. Your price is more than reasonable, though.

10-25-2013, 09:22 AM	#6
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Console and choke spring/stove No problem, thanks for the bump. This is more for someone trying to do a restoration. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

10-26-2013, 02:29 PM	#7
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Console and choke spring/stove Bump for a nice restorable console with all the parts incuded. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

10-28-2013, 06:49 AM	#8
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Console and choke spring/stove Ttt __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.