|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-26-2013, 04:23 PM
|
#1 |
|
Registered User
 
Join Date: Dec 2012
Location: Chandler AZ
Posts: 1,149
|
1991 700R4 dust cover bolts
Does any one know the bolt size for the bolts that hold the torque converter cover on please?
Thanks, Vince
__________________
1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9 |
|
|
|
10-26-2013, 05:16 PM
|
#2 |
|
Registered User
Join Date: Dec 2012
Location: Chandler AZ
Posts: 1,149
|
Re: 1991 700R4 dust cover bolts
FOUND IT HERE! Just in case someone else was looking for the same info.
__________________
1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9 |
|
|
|
|
10-28-2013, 11:21 AM
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: Brighton, WI
Posts: 504
|
Re: 1991 700R4 dust cover bolts
I retapped mine to 1/4-20 I believe, I think they were metric but someone screwed them up previous to me
|
|
|
|
|
10-28-2013, 12:11 PM
|
#4 |
|
Registered User
Join Date: Dec 2012
Location: Chandler AZ
Posts: 1,149
|
Re: 1991 700R4 dust cover bolts
Good thinking on the retap. I should have done the same but somehow I break taps and didn't want to deal with fishing another one out. The 6mm x 1mm (pitch) x 12mm long worked fine. The problem for me is the one that was sold to me looks like the wrong one. The bottom 2 bolt holes bump into the pan. Were there any changes between years of 700s? I have included a pic.
__________________
1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9 |
|
|
|
|
10-29-2013, 11:32 AM
|
#5 |
|
Registered User
Join Date: Apr 2013
Location: Brighton, WI
Posts: 504
|
Re: 1991 700R4 dust cover bolts
hmm, looks to be the same cover as mine. if I remember right, the cover was awful close to the pan, I think it fit tho. maybe try a die grinder to give you clearance. my pan was ordered for a th350 (as a Christmas gift) otta lmc's magazine, but it bolted right to my 700r4
|
|
|
|
|
10-29-2013, 03:40 PM
|
#6 |
|
Registered User
Join Date: Dec 2012
Location: Chandler AZ
Posts: 1,149
|
Re: 1991 700R4 dust cover bolts
Thanks....Die Grinder and Hammer Time
__________________
1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
