|
10-29-2013, 11:19 AM
|
#1 |
|
Registered User
 Join Date: Sep 2011
Location: Lewisburg, TN
Posts: 315
|
oil pan gasket
1964 I6 230. On the gasket that runs the length of the pan, should I put sealer or no? If so which kind? I know to put RTV in the corners. I am replacing a leaking rear main seal. Also any tricks would help.
Thanks Larry |
|
|
|
10-29-2013, 07:00 PM
|
#2 |
|
Registered User
Join Date: Mar 2010
Location: Edgewater NJ
Posts: 159
|
Re: oil pan gasket
I have had good results by gluing the gasket to the block with contact cement and then using black permatex form a gasket. The sticky stuff. I find that when I use RTV with a gasket, the gasket has a tendency to move around.
I have a tendency to over tighten as well. I use a nut driver, or a 1/4" ratchet set, even a tourqe wrench. You can always tighten things up a little more, but you can never go back. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
