|
11-03-2013, 09:56 PM
|
#1 |
|
Registered User
Join Date: Nov 2008
Location: texas
Posts: 84
|
wheel fitment
I tried searching couldn't find what i was looking for. I came across a set of 16" six lug factory wheels off a 2004 gmc. I was curious if these would fit my 1968 c10? Any help with be great.
|
|
|
|
11-03-2013, 11:03 PM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Charlotte, NC
Posts: 350
|
Re: wheel fitment
The bolt pattern is the same, so they will bolt up. Depending on the offset they may "tuck" or "poke".
__________________
70 CST, 6.0/ 4L80E in the works. *Custom harness by 68 Short Step* |
|
|
|
|
11-04-2013, 01:35 PM
|
#3 |
|
Registered User
Join Date: May 2013
Location: Chicago, IL
Posts: 217
|
Re: wheel fitment
Backspacing is one issue. You're biggest hurdle will be with your hubs bore size. The bore opening on those wheel will be 78.3mm. I believe the 68 is a 108mm. You would either have to have the center of the wheel bored out to 108 or buy wheel adapters.
|
|
|
|
|
11-05-2013, 10:33 AM
|
#4 |
|
Registered User
Join Date: Nov 2008
Location: texas
Posts: 84
|
Re: wheel fitment
thanks for the info.
|
|
|
|
|
11-05-2013, 11:59 AM
|
#5 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: wheel fitment
Here are a couple.
One of the prettiest wheels GM has produced in a long time to me.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71  Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
