11-05-2013, 10:45 AM | #1 |
Senior Member
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
info for brackets
Anybody used Skip White's 36inch Stainless Throttle Cable P/N 08236 and his ALUMBRACK throttle cable bracket for the Holley 4150/4160??
The problem with running the newer Vortec heads is there is not a bracket made that will allow for the kick down cable to be used, I have tried to use the Cheap o adjustable crap and the one from edelbrock but it is made for performer carbs not holley, so either you get a kick down that works but it shortens your throttle linkage so you dont get a full wide open throttle or you just have to manually downshift.
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks |
11-06-2013, 09:50 AM | #2 |
Senior Member
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: info for brackets
Bump, what i meant to say is Vortec style manifold had different bolt pattern so the stock GM kickdown/throttle brackets will not work
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks |
11-06-2013, 07:23 PM | #3 |
Registered User
Join Date: Nov 2012
Location: ravenwood, mo
Posts: 709
|
Re: info for brackets
Due to his feedback, I wouldn't purchase anything from him. I'm sure you can find it somewhere else that you know you can return it if it doesn't work out.
|
11-06-2013, 07:59 PM | #4 |
Senior Member
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: info for brackets
I have read some of is feedback and other reviews , and i have to agree. i do Know summit sales same type of bracket from different brands, just wondering if the set up will work on my engine?
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks |
Bookmarks |
|
|