MI 350 engine accessory lot - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TBONE1964** · 11-05-2013, 07:24 PM

Due to the fact that I have somewhat changed my direction on my 72, I am offering this lot of parts for sale. Everything in the photos was bought to bring my 72 engine compartment back to as stock appearing as possible. This collection took a while to gather. All parts (minus the carb) have been sand blasted and painted with engine enamel. Most everything you see here was purchased from a board member at one time or another.

Thank you for looking.

Here is a list:
LH / RH Ram's horn manifolds with new studs and mounting bolts, doughnuts and heat stove.
Pair of valve covers with fel-pro gaskets (7/32 thick)
All of the spark plug wire holders for the factory wires.
Air cleaner housing and adapter with hose and correct tower clamps
Q-Jet carb 7042210. Needs rebuilt and needs some linkage to be complete.
Complete set of AC brackets for a A6 compressor.
Set of PS brackets
Set of Alt brackets
Oil filler tube
Double groove water pump pulley.
Harmonic balancer pulley ( two piece AC type)

I am looking for $450.00 for the complete lot. I would rather not separate but will consider it if I get good offers for separate parts.

mo · 11-05-2013, 07:27 PM

Great looking collection. I'm tempted. Good luck with the sale!

**TBONE1964** · 11-05-2013, 07:31 PM

Thank you,

There is also a point style distributor and coil bracket that goes with this lot. It will need new parts such as points, condenser, cap and rotor but is in otherwise good shape.

Rem701 · 11-05-2013, 09:44 PM

If you consider separating I would like the spark plug wire holders

**D.PASSMORE** · 11-05-2013, 11:11 PM

Interested in Carb and valve covers.

**lawest** · 11-05-2013, 11:25 PM

Int. in the accessory mounting brackets and the air cleaner parts.

**TBONE1964** · 11-06-2013, 01:18 AM

Quote:

Originally Posted by D.PASSMORE

Interested in Carb and valve covers.

PM sent.

**TBONE1964** · 11-06-2013, 01:19 AM

Quote:

Originally Posted by Rem701

If you consider separating I would like the spark plug wire holders

Just the wire holders or do you want the shields also?

**TBONE1964** · 11-06-2013, 01:23 AM

Quote:

Originally Posted by lawest

Int. in the accessory mounting brackets and the air cleaner parts.

PM sent

**TBONE1964** · 11-06-2013, 01:26 AM

Due to an overwhelming response, I will consider splitting up this lot. PM's have been sent to interested parties.

Thank you for looking
Tom

Rem701 · 11-06-2013, 04:46 AM

Quote:

Originally Posted by TBONE1964

Just the wire holders or do you want the shields also?

I would like the shields as well.

**DaHos** · 11-06-2013, 07:36 AM

Tom, Interested in the "lot". please call me, thx, D'

**TBONE1964** · 11-06-2013, 08:26 AM

Quote:

Originally Posted by DaHos

Tom, Interested in the "lot". please call me, thx, D'

Dave,

Left you a message. Give me a call back. I will send you a PM with #'s

Thank you,
Tom

Andrew S · 11-06-2013, 01:14 PM

If you still decide to split things up, I am interested in the pulleys.
Thanks-
Andrew

**TBONE1964** · 11-06-2013, 01:59 PM

Quote:

Originally Posted by Andrew S

If you still decide to split things up, I am interested in the pulleys.
Thanks-
Andrew

I will let you know soon

Thank you,
Tom

**DaHos** · 11-06-2013, 08:26 PM

Tom, per our conversation "I will take it".

See u this weekend, D'

**TBONE1964** · 11-06-2013, 08:34 PM

Thank you Dave,

The lot is sold.

Thank you to all that inquired.
Tom

11-05-2013, 07:24 PM	#1
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	350 engine accessory lot Due to the fact that I have somewhat changed my direction on my 72, I am offering this lot of parts for sale. Everything in the photos was bought to bring my 72 engine compartment back to as stock appearing as possible. This collection took a while to gather. All parts (minus the carb) have been sand blasted and painted with engine enamel. Most everything you see here was purchased from a board member at one time or another. Thank you for looking. Here is a list: LH / RH Ram's horn manifolds with new studs and mounting bolts, doughnuts and heat stove. Pair of valve covers with fel-pro gaskets (7/32 thick) All of the spark plug wire holders for the factory wires. Air cleaner housing and adapter with hose and correct tower clamps Q-Jet carb 7042210. Needs rebuilt and needs some linkage to be complete. Complete set of AC brackets for a A6 compressor. Set of PS brackets Set of Alt brackets Oil filler tube Double groove water pump pulley. Harmonic balancer pulley ( two piece AC type) I am looking for $450.00 for the complete lot. I would rather not separate but will consider it if I get good offers for separate parts. Attached Images __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-05-2013, 07:27 PM	#2
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: 350 engine accessory lot Great looking collection. I'm tempted. Good luck with the sale! __________________ 72 Cheyenne super swb 4x4 68 CST swb anniversary gold 67 custom swb 4x4

11-05-2013, 07:31 PM	#3
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 350 engine accessory lot Thank you, There is also a point style distributor and coil bracket that goes with this lot. It will need new parts such as points, condenser, cap and rotor but is in otherwise good shape. __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-05-2013, 09:44 PM	#4
Rem701 Registered User Join Date: Jun 2013 Location: Lake Charles LA Posts: 70	Re: 350 engine accessory lot If you consider separating I would like the spark plug wire holders

11-05-2013, 11:11 PM	#5
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: 350 engine accessory lot Interested in Carb and valve covers. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

11-05-2013, 11:25 PM	#6
lawest Registered User Join Date: Jan 2008 Location: Tuttle, OK Posts: 205	Re: 350 engine accessory lot Int. in the accessory mounting brackets and the air cleaner parts. __________________ 69 K10 SWB Project Dream '69 2011 K2500 Silverado Beat to fit, Paint to match Dream '69 Build Thread

11-06-2013, 01:26 AM	#10
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 350 engine accessory lot Due to an overwhelming response, I will consider splitting up this lot. PM's have been sent to interested parties. Thank you for looking Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-06-2013, 07:36 AM	#12
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: 350 engine accessory lot Tom, Interested in the "lot". please call me, thx, D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

11-06-2013, 01:14 PM	#14
Andrew S Registered User Join Date: Apr 2012 Location: North Central Washington Posts: 64	Re: 350 engine accessory lot If you still decide to split things up, I am interested in the pulleys. Thanks- Andrew __________________ '72 K20

11-06-2013, 08:26 PM	#16
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: 350 engine accessory lot Tom, per our conversation "I will take it". See u this weekend, D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

11-06-2013, 08:34 PM	#17
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 350 engine accessory lot Thank you Dave, The lot is sold. Thank you to all that inquired. Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.