CL ad for a '49 pu - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Highsider · 11-12-2013, 01:08 PM

Not mine, but figured someone needs a winter project!

http://desmoines.craigslist.org/cto/4179326674.html

Daze57 · 11-12-2013, 02:41 PM

nice starter for someone - that;ll keep ya busy

**Dan in Pasadena** · 11-12-2013, 03:12 PM

Ok, someone's gonna say it so I may as well:

"That'll buff right out!"

But seriously, though there are no doubt guys here who COULD make that into a running good truck, why?

I'm not sure I'd take that as anything more than a parts truck even at that low price. Hell, even for free.

There are fewer and fewer good AD's out there but this one isn't one of them from the look of those photos.

Highsider · 11-12-2013, 06:07 PM

So, Dan, if I bought that and did a little work on it, you figure I couldn't end up with this, worth $200k?:

coralhead · 11-12-2013, 08:15 PM

Quote:

Originally Posted by Dan in Pasadena

Ok, someone's gonna say it so I may as well:

"That'll buff right out!"

But seriously, though there are no doubt guys here who COULD make that into a running good truck, why?

I'm not sure I'd take that as anything more than a parts truck even at that low price. Hell, even for free.

There are fewer and fewer good AD's out there but this one isn't one of them from the look of those photos.

Just the fact that it has a title makes the truck worth $750. Depending on the shape of the other front fenders can also make it worth while for the cost. Granted the running boards are shot but if the cab, doors, bed sides and fenders are in decent shape it is worth the price. Probably get it for 5 or 6 Ben Franklins.

**Dan in Pasadena** · 11-12-2013, 08:18 PM

Like I said, it's a parts truck at best...to me. If anyone else wants to take it on? Lemme know so I can put on the popcorn and start watching!

coralhead · 11-12-2013, 09:23 PM

If you want to go through some popcorn keep an Eye on this

http://67-72chevytrucks.com/vboard/s...d.php?t=561430

Highsider · 11-12-2013, 09:48 PM

Quote:

Originally Posted by coralhead

If you want to go through some popcorn keep an Eye on this

http://67-72chevytrucks.com/vboard/s...d.php?t=561430

I am actually pretty busy sweeping the shop floor.

mechanixman · 11-12-2013, 11:24 PM

Quote:

Originally Posted by Highsider

So, Dan, if I bought that and did a little work on it, you figure I couldn't end up with this, worth $200k?:

Only after you put $400K into it.

Quote:

Originally Posted by Dan in Pasadena

Like I said, it's a parts truck at best...to me. If anyone else wants to take it on? Lemme know so I can put on the popcorn and start watching!

I'll do it! If I had the time, means, or space.....

Quote:

Originally Posted by coralhead

If you want to go through some popcorn keep an Eye on this

http://67-72chevytrucks.com/vboard/s...d.php?t=561430

Henry50 · 11-12-2013, 11:47 PM

I didn't think it looked that bad.
Definitely not a 49 though looks like a 51 to me.

av8tr33337 · 11-13-2013, 12:47 AM

Quote:

Originally Posted by Henry50

I didn't think it looked that bad.
Definitely not a 49 though looks like a 51 to me.

Unless they swapped cabs or doors it's absolutely a 51. That was the only year that had wing windows AND turn down handles.

**buggy5872** · 11-13-2013, 09:13 AM

Its got a title and patina...what more could anyone ask for.....

mechanixman · 11-13-2013, 09:33 AM

For you buggy?
it to be a COE.

11-12-2013, 01:08 PM	#1
Highsider Registered User Join Date: Jun 2012 Location: Southern Iowa Posts: 944	CL ad for a '49 pu Not mine, but figured someone needs a winter project! http://desmoines.craigslist.org/cto/4179326674.html __________________ Jimi J from I-Oh-Way '57 Panel 3105 Met this deer... Roof Swap on my Panel Jim's Bread Truck

11-12-2013, 02:41 PM	#2
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: CL ad for a '49 pu nice starter for someone - that;ll keep ya busy

11-12-2013, 03:12 PM	#3
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,338	Re: CL ad for a '49 pu Ok, someone's gonna say it so I may as well: "That'll buff right out!" But seriously, though there are no doubt guys here who COULD make that into a running good truck, why? I'm not sure I'd take that as anything more than a parts truck even at that low price. Hell, even for free. There are fewer and fewer good AD's out there but this one isn't one of them from the look of those photos. __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

11-12-2013, 06:07 PM	#4
Highsider Registered User Join Date: Jun 2012 Location: Southern Iowa Posts: 944	Re: CL ad for a '49 pu So, Dan, if I bought that and did a little work on it, you figure I couldn't end up with this, worth $200k?: __________________ Jimi J from I-Oh-Way '57 Panel 3105 Met this deer... Roof Swap on my Panel Jim's Bread Truck

11-12-2013, 08:18 PM	#6
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,338	Re: CL ad for a '49 pu Like I said, it's a parts truck at best...to me. If anyone else wants to take it on? Lemme know so I can put on the popcorn and start watching! __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

11-12-2013, 09:23 PM	#7
coralhead Registered User Join Date: Jun 2011 Location: Floyds Knobs, IN Posts: 430	Re: CL ad for a '49 pu If you want to go through some popcorn keep an Eye on this http://67-72chevytrucks.com/vboard/s...d.php?t=561430

11-12-2013, 11:47 PM	#10
Henry50 Registered User Join Date: Sep 2011 Location: Evansville In Posts: 173	Re: CL ad for a '49 pu I didn't think it looked that bad. Definitely not a 49 though looks like a 51 to me.

11-13-2013, 09:13 AM	#12
buggy5872 Senior Member Join Date: Jun 2011 Location: North Beaver TWP PA Posts: 833	Re: CL ad for a '49 pu Its got a title and patina...what more could anyone ask for..... __________________ ___________________________ 1959 Apache Short Fleetside, 1959 Apache NAPCO Long Stepside, 1957 3100 with 59 fleetside bed 1957 5700 LCF Crew Cab "Big Bertha",1959 GMC F370 1958 GMC 600, 1946 Chevy, 1959 Viking 60 LCF 1974 Elcamino SS, 1979 6500 GMC Tilt Bed Wrecker Big Bertha Build

11-13-2013, 09:33 AM	#13
mechanixman Registered User Join Date: Sep 2012 Location: Mt. Prospect, ILL Posts: 820	Re: CL ad for a '49 pu For you buggy? it to be a COE. __________________ -Nick Projects: 1952 Chevy 1 ton = The Build page



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.