The Rotti-Rod (65 Suburban) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zr1pat · 02-07-2011, 05:20 PM

Well picked this 65 Suburban up to haul my dogs (Rottweilers) around in. I have a 3 year old female that I rescued when she was 4 months old. I bought a male pup from Land O Lakes, Florida in Dec. This Suburban is going to be their ride. It was a 283-4 speed that was sweet running, but after talking to my brother, IT"S GO BIG OR GO HOME.

**Clyde65** · 02-07-2011, 05:23 PM

I bet the male sure wishes he was back in Florida huh? Nice burb man!

zr1pat · 02-07-2011, 06:01 PM

Thanks, the Rotti's like the snow, but yes Florida was really nice when we were there last month. Not like here with our fresh dump of snow.

zr1pat · 02-07-2011, 06:19 PM

I found a good hood to replace the damage one. Cost me a $100. I also ordered $800 worth of new metal (fenders, patch panels etc). I picked up a complete front end from a 1980 Heavy Half Ton. The Front end cost me $300 which I thought was to much, but getting hard to find in my area. A friend has all new brakes for it that he is donating to the project. My Brother and I striped out the front end and removed the engine and 4 speed etc. Once we had the front end removed we discovered that the frame was bent from previous accident. Will be a easy pull to fix. We took the Rotti-Rod to a friend who is doing the rust repair / body work for me. Well it's official, its GO BIG and NOT HOME. I picked up a rebuild 454 bored .40 short block for $600. I also managed to locate and purchase a set of rebuilt 781 castings heads for $250. I am stoked. The Rotti-Rod is coming along. Once I get it back from Rick we will install the front end and the 462 monster. Still lots togather like 4L80E, blower, headers etc.

Thats all for now

**Clyde65** · 02-07-2011, 06:39 PM

Wow, you have been a busy young man! I would love to have a burb, but I have no place to build it, no garage and wont spend $500 a month for rental. Oh, btw, if you put a 4l80e in your truck, you will need a computer to control it, not sure if you knew or not. They are very strong. You have me on the edge of my seat with this build.

**Corts60** · 02-07-2011, 07:10 PM

Great stuff so far! How hard was it to pull the front clip? I plan on doing this with my suburban very shortly....

zr1pat · 02-07-2011, 07:27 PM

Corts60, the front clip was really easy, did not take my brother and I very long at all with no power tools. We maybe half a day to remove the front clip and ready the engine and transmission to be lifted out.

jimmydean · 02-07-2011, 07:38 PM

Good looking build and great looking dogs. I miss having a Rottie around, best dog ever.

zr1pat · 02-07-2011, 07:51 PM

Thanks, If I could I would have a whole team of Rottie's to fill my Suburban. Lulu (rescue female) open my eyes to this wonderful breed of Dogs. I then research the breed and found the best pedigree in Florida, which we were able to purchase Bruiser. I am going on 3 plus years with Rottie's and they amaze me every day. I now would never own another breed but Rottweilers.

**chevy_man5** · 02-07-2011, 10:56 PM

Rotti's are the best dogs!! Our 150lb Fat Max, is quite a deterrent. NO-ONE comes into our yard, unless my wife or I is out there.

We have to baby gate him out of the garage, because he thinks we lay on the creepers to cushion them for his butt. He tries to sit or lay on us.

In reality, he could probably slap the baby gate down with his tongue, but he doesn't know that.

We make sure he stays safe when watching us work.

zr1pat · 02-07-2011, 11:21 PM

LOL, I think the Rottie's are hijacking my build project.

**chevy_man5** · 02-07-2011, 11:40 PM

SORRY ZR1PAT!!!!!

**Captainfab** · 02-08-2011, 02:42 AM

Nice looking Burb. And it has the Custom trim too!

So a blown 462????

Depending on your skills and patience, you can build your own controller for that 4L80E. That is unless you're going full manual.

gostranger · 02-08-2011, 07:19 AM

awesome burban!! i will be watching this one!!

zr1pat · 11-26-2011, 05:49 PM

Well its been a while. The Rotti-Rod has had its name changed to the Rotten-Rod. All the rust has been cut out and new inner and outer panels made and welded into place. It was a huge job. Body has been block sanded and primered and sealed. It will be off to the frame shop to do a minor pull on the front then finely home.

McMurphy · 11-27-2011, 03:45 AM

Wow that was a long turn over time for your body work!

You are back to winter again...

piratexpress1369a · 08-24-2012, 05:39 PM

any updates

zr1pat · 11-13-2013, 01:37 AM

Well I got side lined, damm dog crashed into my leg and broke it in 3, spent a week in the hospital and underwent a emergency operation and got to have a 7 month vacation with no pay. Had to sell the BBC but managed to keep the Burb. After getting caught up on my financial situation we are back on the Burb. Friday its off to the frame shop to get the frame straighten. Question, I want to lower the Burb but do not want to notch the frame, how much can i drop in front and rear and what do I need to get. Thanks

**chevy_man5** · 11-13-2013, 10:35 AM

That is terrible Zr1pat! How in the world did that happen? So sorry about the down time, but glad you are back up and at it!

piratexpress1369a · 11-13-2013, 02:04 PM

ouch that hurt ..glad you are back on your feet ..

02-07-2011, 05:20 PM	#1
zr1pat Registered User Join Date: Dec 2010 Location: Lumby, BC Posts: 24	The Rotti-Rod (65 Suburban) Well picked this 65 Suburban up to haul my dogs (Rottweilers) around in. I have a 3 year old female that I rescued when she was 4 months old. I bought a male pup from Land O Lakes, Florida in Dec. This Suburban is going to be their ride. It was a 283-4 speed that was sweet running, but after talking to my brother, IT"S GO BIG OR GO HOME. Attached Images

02-07-2011, 05:23 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: The Rotti-Rod (65 Suburban) I bet the male sure wishes he was back in Florida huh? Nice burb man! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-07-2011, 06:01 PM	#3
zr1pat Registered User Join Date: Dec 2010 Location: Lumby, BC Posts: 24	Re: The Rotti-Rod (65 Suburban) Thanks, the Rotti's like the snow, but yes Florida was really nice when we were there last month. Not like here with our fresh dump of snow. Attached Images

02-07-2011, 06:19 PM	#4
zr1pat Registered User Join Date: Dec 2010 Location: Lumby, BC Posts: 24	Re: The Rotti-Rod (65 Suburban) I found a good hood to replace the damage one. Cost me a $100. I also ordered $800 worth of new metal (fenders, patch panels etc). I picked up a complete front end from a 1980 Heavy Half Ton. The Front end cost me $300 which I thought was to much, but getting hard to find in my area. A friend has all new brakes for it that he is donating to the project. My Brother and I striped out the front end and removed the engine and 4 speed etc. Once we had the front end removed we discovered that the frame was bent from previous accident. Will be a easy pull to fix. We took the Rotti-Rod to a friend who is doing the rust repair / body work for me. Well it's official, its GO BIG and NOT HOME. I picked up a rebuild 454 bored .40 short block for $600. I also managed to locate and purchase a set of rebuilt 781 castings heads for $250. I am stoked. The Rotti-Rod is coming along. Once I get it back from Rick we will install the front end and the 462 monster. Still lots togather like 4L80E, blower, headers etc. Thats all for now Attached Images Last edited by zr1pat; 02-07-2011 at 06:20 PM.

02-07-2011, 06:39 PM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: The Rotti-Rod (65 Suburban) Wow, you have been a busy young man! I would love to have a burb, but I have no place to build it, no garage and wont spend $500 a month for rental. Oh, btw, if you put a 4l80e in your truck, you will need a computer to control it, not sure if you knew or not. They are very strong. You have me on the edge of my seat with this build. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 02-07-2011 at 06:40 PM.

02-07-2011, 07:10 PM	#6
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,672	Re: The Rotti-Rod (65 Suburban) Great stuff so far! How hard was it to pull the front clip? I plan on doing this with my suburban very shortly.... __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(winter unit)https://67-72chevytrucks.com/vboard/...25#post8900725

02-07-2011, 07:27 PM	#7
zr1pat Registered User Join Date: Dec 2010 Location: Lumby, BC Posts: 24	Re: The Rotti-Rod (65 Suburban) Corts60, the front clip was really easy, did not take my brother and I very long at all with no power tools. We maybe half a day to remove the front clip and ready the engine and transmission to be lifted out.

02-07-2011, 07:38 PM	#8
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: The Rotti-Rod (65 Suburban) Good looking build and great looking dogs. I miss having a Rottie around, best dog ever. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

02-07-2011, 07:51 PM	#9
zr1pat Registered User Join Date: Dec 2010 Location: Lumby, BC Posts: 24	Re: The Rotti-Rod (65 Suburban) Thanks, If I could I would have a whole team of Rottie's to fill my Suburban. Lulu (rescue female) open my eyes to this wonderful breed of Dogs. I then research the breed and found the best pedigree in Florida, which we were able to purchase Bruiser. I am going on 3 plus years with Rottie's and they amaze me every day. I now would never own another breed but Rottweilers.

02-07-2011, 10:56 PM	#10
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: The Rotti-Rod (65 Suburban) Rotti's are the best dogs!! Our 150lb Fat Max, is quite a deterrent. NO-ONE comes into our yard, unless my wife or I is out there. We have to baby gate him out of the garage, because he thinks we lay on the creepers to cushion them for his butt. He tries to sit or lay on us. In reality, he could probably slap the baby gate down with his tongue, but he doesn't know that. We make sure he stays safe when watching us work. __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

02-07-2011, 11:21 PM	#11
zr1pat Registered User Join Date: Dec 2010 Location: Lumby, BC Posts: 24	Re: The Rotti-Rod (65 Suburban) LOL, I think the Rottie's are hijacking my build project.

02-07-2011, 11:40 PM	#12
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: The Rotti-Rod (65 Suburban) SORRY ZR1PAT!!!!! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

02-08-2011, 02:42 AM	#13
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: The Rotti-Rod (65 Suburban) Nice looking Burb. And it has the Custom trim too! So a blown 462???? Depending on your skills and patience, you can build your own controller for that 4L80E. That is unless you're going full manual. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-08-2011, 07:19 AM	#14
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: The Rotti-Rod (65 Suburban) awesome burban!! i will be watching this one!!

11-26-2011, 05:49 PM	#15
zr1pat Registered User Join Date: Dec 2010 Location: Lumby, BC Posts: 24	Re: The Rotti-Rod (65 Suburban) Well its been a while. The Rotti-Rod has had its name changed to the Rotten-Rod. All the rust has been cut out and new inner and outer panels made and welded into place. It was a huge job. Body has been block sanded and primered and sealed. It will be off to the frame shop to do a minor pull on the front then finely home.



Register or Log In To remove these advertisements.

11-27-2011, 03:45 AM	#16
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: The Rotti-Rod (65 Suburban) Wow that was a long turn over time for your body work! You are back to winter again... __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

08-24-2012, 05:39 PM	#17
piratexpress1369a Registered User Join Date: Jun 2012 Location: Selkirk Ontario Canada Posts: 1,141	Re: The Rotti-Rod (65 Suburban) any updates __________________ My 63 GMC Panel Slow Build http://67-72chevytrucks.com/vboard/s...=1#post5457281 63

11-13-2013, 01:37 AM	#18
zr1pat Registered User Join Date: Dec 2010 Location: Lumby, BC Posts: 24	Re: The Rotti-Rod (65 Suburban) Well I got side lined, damm dog crashed into my leg and broke it in 3, spent a week in the hospital and underwent a emergency operation and got to have a 7 month vacation with no pay. Had to sell the BBC but managed to keep the Burb. After getting caught up on my financial situation we are back on the Burb. Friday its off to the frame shop to get the frame straighten. Question, I want to lower the Burb but do not want to notch the frame, how much can i drop in front and rear and what do I need to get. Thanks

11-13-2013, 10:35 AM	#19
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: The Rotti-Rod (65 Suburban) That is terrible Zr1pat! How in the world did that happen? So sorry about the down time, but glad you are back up and at it! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

11-13-2013, 02:04 PM	#20
piratexpress1369a Registered User Join Date: Jun 2012 Location: Selkirk Ontario Canada Posts: 1,141	Re: The Rotti-Rod (65 Suburban) ouch that hurt ..glad you are back on your feet .. __________________ My 63 GMC Panel Slow Build http://67-72chevytrucks.com/vboard/s...=1#post5457281 63

Register or Log In To remove these advertisements.