steering wheel ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PureChevy · 12-09-2003, 06:19 PM

I am getting my new exhaust on today and i figured i would have the people put on my steering wheel for me, because i dont have a steering wheel puller.

it is a steering wheel from a 94 full size blazer. They called me and told me that they couldnt hook up the horn. I told them not to worry about it, and that i would handle it. I know i have seen a thread on how to get the horn to work on these types of steering wheels.
can somebody show me the thread, or tell me how.

BLACK AND BLUE 67-72 · 12-09-2003, 06:27 PM

If I am remembering right on mine I took a bullet connector female I think and attached a wire to it with the spade connector for the horn on the wheel. I took the bullet connector and placed it over the spring loaded contact that is on the round black or white plastic piece that has the contact metal ring ran the wire through the hole and attached the other end to the horn button.

shuttermutt · 12-09-2003, 07:03 PM

Quote:

Originally posted by PureChevy
I am getting my new exhaust on today and i figured i would have the people put on my steering wheel for me, because i dont have a steering wheel puller.

it is a steering wheel from a 94 full size blazer. They called me and told me that they couldnt hook up the horn. I told them not to worry about it, and that i would handle it. I know i have seen a thread on how to get the horn to work on these types of steering wheels.
can somebody show me the thread, or tell me how.

That is some kind of serious freaky. I'm going by tonight to pick up my truck that I just had an engine swap and dual exhaust installation. I also bought a steering wheel from a 94 Chevy and had them throw it on. They also complained that they couldn't get the horn connected. I told them I'd do it and I will...

...by going here.

Wish me luck, everybody. I've heard the new engine, but tonight I hand the man his money and drive away!

Longhorn Man · 12-09-2003, 07:04 PM

I just did a thread in the FAQ about the steering wheel in question and the horn.
You'll have to pull the wheel back off though most likely.

BLACK AND BLUE 67-72 · 12-09-2003, 07:08 PM

Sounds like a lot more work than the way I did it!

Bill72BB · 12-09-2003, 07:16 PM

Quote:

Originally posted by BLACK AND BLUE 67-72
If I am remembering right on mine I took a bullet connector female I think and attached a wire to it with the spade connector for the horn on the wheel. I took the bullet connector and placed it over the spring loaded contact that is on the round black or white plastic piece that has the contact metal ring ran the wire through the hole and attached the other end to the horn button.

This is the same way I hooked mine up and it still works.

Good Luck

lukecp · 12-09-2003, 07:23 PM

Pulling the wheel is no big deal. I bought a steering wheel puller for the hefty sum of $4 a few years ago

WRMZ71 · 12-09-2003, 07:26 PM

Who needs horns???? WATCH FOR FINGER!!!!!

WB72 · 12-10-2003, 01:34 AM

Has anyone tried to install a wheel from a '02?

Longhorn Man · 12-10-2003, 01:43 AM

an 02 would have an air bag wouldn't it?

dinnut · 12-10-2003, 01:50 AM

i dont see the custom horn buttons on jc whitney. i need one i broke mine by stepping on it. i broke the tabs on the back off

WB72 · 12-13-2003, 09:01 PM

yes it would have an airbag, but that wouldnt be operational.

12-09-2003, 06:19 PM	#1
PureChevy Registered User Join Date: Jun 2003 Location: Hickory, North Carolina Posts: 340	steering wheel ??? I am getting my new exhaust on today and i figured i would have the people put on my steering wheel for me, because i dont have a steering wheel puller. it is a steering wheel from a 94 full size blazer. They called me and told me that they couldnt hook up the horn. I told them not to worry about it, and that i would handle it. I know i have seen a thread on how to get the horn to work on these types of steering wheels. can somebody show me the thread, or tell me how. __________________ 1972 k10 4x4 LWB (Sold in 2005)

12-09-2003, 06:27 PM	#2
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	If I am remembering right on mine I took a bullet connector female I think and attached a wire to it with the spade connector for the horn on the wheel. I took the bullet connector and placed it over the spring loaded contact that is on the round black or white plastic piece that has the contact metal ring ran the wire through the hole and attached the other end to the horn button. __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA Last edited by BLACK AND BLUE 67-72; 12-09-2003 at 07:07 PM.

12-09-2003, 07:08 PM	#5
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Sounds like a lot more work than the way I did it! __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

12-09-2003, 07:23 PM	#7
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Pulling the wheel is no big deal. I bought a steering wheel puller for the hefty sum of $4 a few years ago __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

12-10-2003, 01:34 AM	#9
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Newer wheel? Has anyone tried to install a wheel from a '02? __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

12-09-2003, 07:04 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I just did a thread in the FAQ about the steering wheel in question and the horn. You'll have to pull the wheel back off though most likely.

12-09-2003, 07:26 PM	#8
WRMZ71 Cause the Chicks DIG IT!! Join Date: Nov 2003 Location: Beaufort SC Posts: 509	Who needs horns???? WATCH FOR FINGER!!!!!

12-10-2003, 01:43 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	an 02 would have an air bag wouldn't it?

12-10-2003, 01:50 AM	#11
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	i dont see the custom horn buttons on jc whitney. i need one i broke mine by stepping on it. i broke the tabs on the back off __________________ 70 longbed 496/th400/Ford 9"

12-13-2003, 09:01 PM	#12
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	yes it would have an airbag, but that wouldnt be operational. __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.