TX Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 03-21-2013, 10:48 PM

Quote:

Originally Posted by mvesr

Do you have a crank pulley for the power steering part number 3751232

Thanks-Mika

sorry, not that I know of. I have a ple of pulleys and if I get time I will look through them, though.

**WIDESIDE72** · 03-23-2013, 01:39 PM

Stoplight switch, throttle bracket, rear light harness and gun rack shipped USPS
Posted via Mobile Device

**WIDESIDE72** · 03-23-2013, 11:33 PM

Quote:

Originally Posted by jjzepplin

Do you have a rag joint? Can't seem to find one... Even on this forum.

Pretty nice rag joint on the truck. The box and pump hadn't leaked and ruined it yet. These are like hen's teeth. $50 shipped, otherwise I will keep it for myself.

**WIDESIDE72** · 03-23-2013, 11:36 PM

Quote:

Originally Posted by Sloan66

By chance do you have the clamp that holds the power steering lines t the frame? If so interested. Thx shipping to 37130

I pulled the frame mounted power steering line retaining clamp nut and bolt.

$10 shipped

HotRod C/10 · 03-23-2013, 11:36 PM

try tinypic.com

**WIDESIDE72** · 03-23-2013, 11:42 PM

Quote:

Originally Posted by pbjsammich

I'd be interested in the gauge cluster if you might have an AC/Heater control panel to go with it? Trying to score these two items from the same seller if possible. Appreciate it!

Ken

I know I had a good ac control at one time, but I think its in a trialer load of stuff I was going to take to the New Braunfels swap meet next month and I didnt have time to dig for it this weekend. I will try next THurs or Fri if you can wait.

**WIDESIDE72** · 03-24-2013, 12:08 AM

Could I please have the title edited to read "core support, glove box door, courtesy harness, gauge cluster, rad mounts'"?

bertvert72 · 03-24-2013, 12:50 AM

i WOULD BE INTERESTED IN THE ASHTRAY AND BRACKET IF YOU STILL HAVE IT

**WIDESIDE72** · 03-24-2013, 01:13 AM

Quote:

Originally Posted by bertvert72

i WOULD BE INTERESTED IN THE ASHTRAY AND BRACKET IF YOU STILL HAVE IT

I still have it. PM SENT

bertvert72 · 03-24-2013, 01:42 AM

i'll take it . how much? first time buying on here.do you take paypal

**WIDESIDE72** · 03-24-2013, 02:32 AM

Quote:

Originally Posted by bertvert72

i'll take it . how much? first time buying on here.do you take paypal

Check your mailbox for a pm with payment info
Posted via Mobile Device

jjzepplin · 03-24-2013, 06:26 AM

Quote:

Originally Posted by WIDESIDE72

Pretty nice rag joint on the truck. The box and pump hadn't leaked and ruined it yet. These are like hen's teeth. $50 shipped, otherwise I will keep it for myself.

I have one on it's way so I will wait on this one. If it turns out to be the wrong one ( again ) I will hit you up.

**WIDESIDE72** · 03-24-2013, 01:54 PM

Feel free to make offers

**WIDESIDE72** · 03-26-2013, 07:19 AM

Quote:

Originally Posted by bertvert72

i WOULD BE INTERESTED IN THE ASHTRAY AND BRACKET IF YOU STILL HAVE IT

Ashtray and bracket sold to Bertvert.

I also have a silver 72 ashtray and bracket for sale. Same deal, $20 shipped. Photos this weekend.
Posted via Mobile Device

**WIDESIDE72** · 03-28-2013, 07:39 AM

Bump
Posted via Mobile Device

**WIDESIDE72** · 03-31-2013, 09:25 PM

Entertaining all offers
Posted via Mobile Device

deuceman32 · 04-25-2013, 03:47 PM

If you still have the SWP power steering pump, pulley and brackets set at $60 shipped (to 14305) I will take them. Thanks.

hotrodtodd · 04-25-2013, 04:54 PM

didnt see a price on brake booster brackets and rod be interested pending price thanks

**WIDESIDE72** · 04-25-2013, 07:09 PM

Quote:

Originally Posted by hotrodtodd

didnt see a price on brake booster brackets and rod be interested pending price thanks

$45 shipped
Posted via Mobile Device

**WIDESIDE72** · 05-02-2013, 08:56 AM

Quote:

Originally Posted by WIDESIDE72

At least one of the levers was broken on the Ac control in this truck but I have another one from a Cheyenne I parted. It would like to like to lay my hands on it first to make sure i really do have it and be sure of it's condition before I give a price on it, though.
Posted via Mobile Device

I went to a swap meet a few weeks ago and pulled everything out but didn't come across the Ac control. I must have sold it. New price on gauge clusters, $40 shipped. I have two ith gauges and one with idiot lights
Posted via Mobile Device

**WIDESIDE72** · 05-02-2013, 08:57 AM

Quote:

Originally Posted by deuceman32

If you still have the SWP power steering pump, pulley and brackets set at $60 shipped (to 14305) I will take them. Thanks.

Sorry sold
Posted via Mobile Device

**WIDESIDE72** · 07-19-2013, 12:41 AM

ttt

Jake1971 · 11-18-2013, 10:44 PM

i am interested in the radiator support and possibly other parts if you still have them. i can pick up local.

**WIDESIDE72** · 11-22-2013, 03:18 PM

Quote:

Originally Posted by WIDESIDE72

Very nice, solid core support, no evidence of ever being wrecked, some pitting on bottom passenger side $150, pickup in Austin TX area or possibly DFW area w/ some negotiating.

Sold to Jake1971

03-23-2013, 01:39 PM	#52
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Stoplight switch, throttle bracket, rear light harness and gun rack shipped USPS Posted via Mobile Device

03-23-2013, 11:36 PM	#55
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets try tinypic.com __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

03-24-2013, 12:08 AM	#57
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Could I please have the title edited to read "core support, glove box door, courtesy harness, gauge cluster, rad mounts'"?

03-24-2013, 12:50 AM	#58
bertvert72 Registered User Join Date: Dec 2009 Location: Dickson,Tn Posts: 216	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets i WOULD BE INTERESTED IN THE ASHTRAY AND BRACKET IF YOU STILL HAVE IT

03-24-2013, 01:42 AM	#60
bertvert72 Registered User Join Date: Dec 2009 Location: Dickson,Tn Posts: 216	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets i'll take it . how much? first time buying on here.do you take paypal

03-24-2013, 01:54 PM	#63
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Feel free to make offers

03-28-2013, 07:39 AM	#65
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Bump Posted via Mobile Device

03-31-2013, 09:25 PM	#66
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Entertaining all offers Posted via Mobile Device

04-25-2013, 03:47 PM	#67
deuceman32 Registered User Join Date: Mar 2012 Location: toronto ontario Posts: 10	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets If you still have the SWP power steering pump, pulley and brackets set at $60 shipped (to 14305) I will take them. Thanks.

04-25-2013, 04:54 PM	#68
hotrodtodd Registered User Join Date: Jan 2005 Location: princeton wv Posts: 257	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets didnt see a price on brake booster brackets and rod be interested pending price thanks

07-19-2013, 12:41 AM	#72
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets ttt

11-18-2013, 10:44 PM	#73
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets i am interested in the radiator support and possibly other parts if you still have them. i can pick up local. Last edited by Jake1971; 02-06-2014 at 08:35 PM. Reason: Privacy settings.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.