TN 72 C30 parting out. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BarryB · 11-09-2013, 10:13 PM

Sorry I've had a family emergency, I will have to postpone any further activity from this thread. Once everything hopefully gets taken care of, I can then get all the pics and info posted up. [B]

boynton · 11-10-2013, 01:11 AM

What gauge cluster does it have/price

stormbear · 11-10-2013, 10:51 AM

If the rear has 4:10 gears I would like the center section. Price with shipping to 12725.Thanks Dave

BarryB · 11-10-2013, 01:19 PM

Quote:

Originally Posted by boynton

What gauge cluster does it have/price

it has the cluster with the oil, temp. 25 + shipping

Quote:

Originally Posted by stormbear

If the rear has 4:10 gears I would like the center section. Price with shipping to 12725.Thanks Dave

I'll let you know when I identify it .

68 IRON · 11-11-2013, 01:45 PM

I'll take the cluster if it has an OEM tach....let me know!

old Chevy guy · 11-12-2013, 12:49 PM

I would be interested in the front rotors if they could be shipped to 02825,pending price of course.

**Gary 70 Jimmy** · 11-12-2013, 01:37 PM

How nice are the c 30 fender emblems.

**70STOVEBOLT** · 11-12-2013, 06:32 PM

Does it have a radio delete plate? If so, how much with clips?

tlcrz1972 · 11-12-2013, 07:33 PM

Does it have a PTO output on the transmission?

BarryB · 11-12-2013, 09:58 PM

Sorry guys, I've been really busy with work. Dark when I leave dark when I get home. So bare with me if I offer to get pics etc.

Quote:

Originally Posted by 68 IRON

I'll take the cluster if it has an OEM tach....let me know!

no tach

Quote:

Originally Posted by old Chevy guy

I would be interested in the front rotors if they could be shipped to 02825,pending price of course.

I'd like to keep the front crossmember complete for now.

Quote:

Originally Posted by Gary 70 Jimmy

How nice are the c 30 fender emblems.

Good driver condition. I'll get pics.

Quote:

Originally Posted by 70STOVEBOLT

Does it have a radio delete plate? If so, how much with clips?

No delete plate.

Quote:

Originally Posted by tlcrz1972

Does it have a PTO output on the transmission?

What do you mean. Yes it has a place for a PTO but no it does not have a PTO.

flashed · 11-12-2013, 10:46 PM

How much for the flat bed ?

BarryB · 11-13-2013, 06:00 PM

Quote:

Originally Posted by flashed

How much for the flat bed ?

It was junk, When I cut the bolts holding it on, it just about fell apart. Sloppy welding job by whoever made it. So, Sorry I've already scrapped it.

old Chevy guy · 11-15-2013, 12:33 AM

I'd like to keep the front crossmember complete for now.

That's fine I'm not in any rush just let me know if that changes, Thanks

bcrouch · 11-16-2013, 12:25 AM

put me in line for the rear end if it is 410 complete or chunk
.
bcrouch

allons · 11-16-2013, 04:19 PM

Got any pics of the trans? Is it a SM465? with the shifter handle? I'm interested, PM me

64LBSS · 11-16-2013, 06:55 PM

Whats the condition of the steering column? If decent, what would you want shipped to Atlanta area?

ksmith59 · 11-18-2013, 11:10 AM

What about the right front fender? Any dents or rust? If not I am interested in it. How for it and the ride to zip 39218

Thanks
Kenny

BarryB · 11-18-2013, 12:46 PM

First off guys, I apoligize for being slow about getting to this. Not only am I working alot, My wife decided to go work seasonal at Sears. So I am having to be a babysitter when I get home. So that takes up alot of the spare time I had. Thats not a bad thing, I enjoy making up for lost time I don't get to spend with my boys, since I do work alot.

Quote:

Originally Posted by old Chevy guy

I'd like to keep the front crossmember complete for now.

That's fine I'm not in any rush just let me know if that changes, Thanks

Ok, sorry hoping to find somebody wanting to convert their ton truck to disc brakes.

Quote:

Originally Posted by bcrouch

put me in line for the rear end if it is 410 complete or chunk
.
bcrouch

Ok will do.

Quote:

Originally Posted by allons

Got any pics of the trans? Is it a SM465? with the shifter handle? I'm interested, PM me

Yes it has the shifter handle out the top. I'm not real sure on the #'s. Its a truck trans though.

Quote:

Originally Posted by 64LBSS

Whats the condition of the steering column? If decent, what would you want shipped to Atlanta area?

Sorry I already sold that locally, it was a converted 3spd column.

Quote:

Originally Posted by ksmith59

What about the right front fender? Any dents or rust? If not I am interested in it. How for it and the ride to zip 39218

Thanks
Kenny

The fenders are rusted, covered over with bondo.

72MARIO · 11-18-2013, 12:52 PM

does it have rear shocks ? I am interested in the mounts if there not rotten

BarryB · 11-18-2013, 05:53 PM

Quote:

Originally Posted by 72MARIO

does it have rear shocks ? I am interested in the mounts if there not rotten

Yes it does. I was working on getting the truck striped today. I'm assuming you want the mounts that are attached to the frame. I'll look at them and let you know.

BarryB · 11-18-2013, 09:19 PM

Quote:

Originally Posted by 72MARIO

does it have rear shocks ? I am interested in the mounts if there not rotten

Quote:

Originally Posted by BarryB

Yes it does. I was working on getting the truck striped today. I'm assuming you want the mounts that are attached to the frame. I'll look at them and let you know.

They are rotten.

BarryB · 11-24-2013, 12:44 AM

Mods can this thread be closed until further notice??

11-09-2013, 10:13 PM	#1
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	72 C30 parting out. Sorry I've had a family emergency, I will have to postpone any further activity from this thread. Once everything hopefully gets taken care of, I can then get all the pics and info posted up. [B] Attached Images __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff! Last edited by BarryB; 11-24-2013 at 12:43 AM.

11-10-2013, 01:11 AM	#2
boynton Registered User Join Date: Feb 2012 Location: Salado, Texas Posts: 1,415	Re: 72 C30 parting out. What gauge cluster does it have/price __________________ Just trying to figure this out... 1970 SWB Step-Side http://67-72chevytrucks.com/vboard/s...d.php?t=552980 1970 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=584499 1970 SWB One Owner Step Side 6.0 LY6/6L90 http://67-72chevytrucks.com/vboard/s...d.php?t=617630 Junkyard's 1971 short wide http://67-72chevytrucks.com/vboard/s...86#post7531186

11-10-2013, 10:51 AM	#3
stormbear Registered User Join Date: May 2011 Location: Claryville NY Posts: 35	Re: 72 C30 parting out. If the rear has 4:10 gears I would like the center section. Price with shipping to 12725.Thanks Dave

11-11-2013, 01:45 PM	#5
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 72 C30 parting out. I'll take the cluster if it has an OEM tach....let me know!

11-12-2013, 12:49 PM	#6
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: 72 C30 parting out. I would be interested in the front rotors if they could be shipped to 02825,pending price of course.

11-12-2013, 01:37 PM	#7
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: 72 C30 parting out. How nice are the c 30 fender emblems. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

11-12-2013, 06:32 PM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: 72 C30 parting out. Does it have a radio delete plate? If so, how much with clips? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-12-2013, 07:33 PM	#9
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: 72 C30 parting out. Does it have a PTO output on the transmission? __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

11-12-2013, 10:46 PM	#11
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: 72 C30 parting out. How much for the flat bed ?

11-15-2013, 12:33 AM	#13
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: 72 C30 parting out. I'd like to keep the front crossmember complete for now. That's fine I'm not in any rush just let me know if that changes, Thanks

11-16-2013, 12:25 AM	#14
bcrouch Registered User Join Date: Feb 2013 Location: wartburg tennessee Posts: 17	Re: 72 C30 parting out. put me in line for the rear end if it is 410 complete or chunk . bcrouch

11-16-2013, 04:19 PM	#15
allons Registered User Join Date: Apr 2013 Location: West Liberty, Ohio Posts: 288	Re: 72 C30 parting out. Got any pics of the trans? Is it a SM465? with the shifter handle? I'm interested, PM me

11-16-2013, 06:55 PM	#16
64LBSS Registered User Join Date: Feb 2013 Location: Roopville, GA Posts: 58	Re: 72 C30 parting out. Whats the condition of the steering column? If decent, what would you want shipped to Atlanta area?

11-18-2013, 11:10 AM	#17
ksmith59 Registered User Join Date: Oct 2010 Location: Richland, MS Posts: 11	Re: 72 C30 parting out. What about the right front fender? Any dents or rust? If not I am interested in it. How for it and the ride to zip 39218 Thanks Kenny

11-18-2013, 12:52 PM	#19
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: 72 C30 parting out. does it have rear shocks ? I am interested in the mounts if there not rotten __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD



Register or Log In To remove these advertisements.

11-24-2013, 12:44 AM	#22
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: 72 C30 parting out. Mods can this thread be closed until further notice?? __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

Register or Log In To remove these advertisements.