Front end coversion and something went wrong - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 11-25-2013, 01:00 AM

I looked thru the original thread that I found on this conversion, and found one member that mentioned that he was having camber/caster issues, but no follow up.

http://www.67-72chevytrucks.com/vboa...ad.php?t=35042

I did physically measure a '69 C20 LCA and a '80 C20 LCA, and even though I could not get a precise measurement, I did not see that there was any difference in the measurement from the center of the shaft to the center of the balljoint. As far as I know the UCA's are the same from '73-'72, but I suppose that would be the next part to look into.

11-25-2013, 01:00 AM	#1
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: Front end coversion and something went wrong I looked thru the original thread that I found on this conversion, and found one member that mentioned that he was having camber/caster issues, but no follow up. http://www.67-72chevytrucks.com/vboa...ad.php?t=35042 I did physically measure a '69 C20 LCA and a '80 C20 LCA, and even though I could not get a precise measurement, I did not see that there was any difference in the measurement from the center of the shaft to the center of the balljoint. As far as I know the UCA's are the same from '73-'72, but I suppose that would be the next part to look into. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.