|
11-29-2013, 07:06 PM
|
#1 |
|
Registered User
Join Date: Oct 2011
Location: teague tx
Posts: 18
|
Camshaft for 454 BBC
I am looking for recommendations for a cam for my 454. Engine is 30 over with flattops, edelbrook Performer RPM intake, headers nothing fancy. I don't want anything to wild but I want some lope to it. Thanks
|
|
|
|
11-29-2013, 07:13 PM
|
#2 |
|
Senior Member
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,950
|
Re: Camshaft for 454 BBC
Need more info. What transmission? If auto does it have a stall converter? Are you opposed to getting a stall converter?What rear gears do you have? What rpm range are you looking to be in? Are you looking for torque? Lumpy idle and nothing wild don't really go together. Something like the lunati voodoo 10110702 is probably in the range you should be looking at. It will make really good torque down low but still have good mid range power.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. |
|
|
|
|
11-29-2013, 07:39 PM
|
#3 |
|
Registered User
Join Date: Oct 2011
Location: teague tx
Posts: 18
|
Re: Camshaft for 454 BBC
Turbo 400 with shift kit stock converter with 3.73 gears.
|
|
|
|
|
11-29-2013, 09:11 PM
|
#4 |
|
Registered User
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
|
Re: Camshaft for 454 BBC
Flat tops in a 454 = 8.0 compression at best. A cam with any lope at all, will be a slug, due to no cylinder pressure, as a result of the extremely low compression.
__________________
Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299 |
|
|
|
|
11-29-2013, 10:21 PM
|
#5 |
|
Registered User
Join Date: Dec 2012
Location: Preble county ohio
Posts: 1,914
|
Re: Camshaft for 454 BBC
comp he 268 is about as big as i would go, NOT the xe268, it is too wild
__________________
"DON'T TOUCH THE TRIM!!"-Early Kyler |
|
|
|
|
12-01-2013, 12:50 AM
|
#6 | |
|
Registered User
Join Date: Apr 2013
Location: erie Pa
Posts: 34
|
Re: Camshaft for 454 BBC
Quote:
http://www.chevelles.com/forums/forumdisplay.php?f=13 I'm leaning towards the XE 268H You can also send your planed build to comp cams (or most any cam manufacturer) and they will recommend a grind for your application... Good luck... |
|
|
|
|
|
12-01-2013, 02:34 PM
|
#7 |
|
Registered User
Join Date: Dec 2012
Location: Preble county ohio
Posts: 1,914
|
Re: Camshaft for 454 BBC
xe 268 needs 9-1 and a stall converter
__________________
"DON'T TOUCH THE TRIM!!"-Early Kyler |
|
|
|
 |
| Bookmarks |
| Tags |
| 454 bbc camshaft |
|
|
Linear Mode
