1970 GMC Shortbed for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Charlie Coleman · 12-05-2003, 06:34 PM

I only have a few pictures at work. I will take more and email them if anyone is interested.

1970 GMC C-10
2WD Shortbed w/6cyl 3spd on flr
It is very straight w/limited rust. One spot on each door and one rocker. It does have a sunroof, does not leak. Runs, but not strong.

I was going to put a Vortec 5.3 in this thing, but may sell to finance my racecar operation. :p
Considering $1800 obo

Charlie Coleman · 12-05-2003, 06:35 PM

#1

Charlie Coleman · 12-05-2003, 06:37 PM

2

Charlie Coleman · 12-05-2003, 06:37 PM

3

Charlie Coleman · 12-05-2003, 06:39 PM

4/4

Charlie Coleman · 12-08-2003, 01:25 PM

top

**D.PASSMORE** · 12-08-2003, 07:42 PM

Charlie,
What ever happened to that 68 LWB your friend was selling, I have never heard back from him and was curoius if it was still at your house or gone, gone, gone. Just wondering, I know you a third party, so.......

Charlie Coleman · 12-08-2003, 07:47 PM

David,

It's still in my pasture. I don't know his long term plans. I know he has been extremely busy. I doubt he will have time to take it down for a VIN verification to title it until next year. It doesn't run, so it isn't easy to load. To be honest, for what he is selling it for, I don't know if it's really worth the effort. He'd be better off parting it out. I haven't talked to him in awhile about it though. I told him he could store it until my house sells. At the rate it's been going.....it could be there another year!

Hope all is well.

Charlie Coleman · 12-08-2003, 07:49 PM

If no one is interested in the truck as a whole, I may part. The bed and tail gate are straight and rust free. Good fenders, hood, Chrome grill.

Cab only has the one bad rocker. Althought it does have a sunroof. Doors have the rust pictured.

Coil springs

No options on truck

Any interest if parted?

**D.PASSMORE** · 12-08-2003, 07:56 PM

Thanks for the info, Iam leaving for the middle east for a year or more. Maybe it will still be around when I return, sure needed it for parts. Have a good one.
Dave

Charlie Coleman · 12-09-2003, 12:22 PM

ttt

HOTFUN · 12-10-2003, 12:09 AM

Charlie

I would be interested in the box. Could you email some pictures of the floor, tailgate and sides please?

Thanks
Mark

**STP67-72** · 12-10-2003, 12:11 AM

Hey Charlie
This is the guy that brought the 4x4 frame to dallas a few months ago for your friend in denver. Tell him to give me a call if you see him again. He has not returned my calls.
Thanks Steve

Charlie Coleman · 12-10-2003, 11:31 AM

Hotfun, I will take pics, but it maybe this weekend before I get a chance. It's dark when I leave for work, and dark when I get home. I meant to take lots of pics last weekend, but I ended up laying in bed sick all weekend.

STP67-72, I will let Jesse know your looking for him. He doesn't spend time on the board anymore. How would you like for him to contact you?

HOTFUN · 12-10-2003, 11:37 AM

Charlie

I have been working the same long hours this week also. Please email them to me at mstastka@neb.rr.com when you have time.

Thanks.
Mark

J.Lance · 12-10-2003, 12:39 PM

Sent you a pm.

Charlie Coleman · 12-15-2003, 05:28 PM

Don't want to part this truck...it's too nice. Offers?

Will post parts prices next.

12-05-2003, 06:35 PM	#2
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	#1 Attached Images

12-05-2003, 06:37 PM	#3
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	2 Attached Images

12-05-2003, 06:37 PM	#4
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	3 Attached Images

12-05-2003, 06:39 PM	#5
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	4/4 Attached Images

12-08-2003, 07:42 PM	#7
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	68 LWB TRUCK Charlie, What ever happened to that 68 LWB your friend was selling, I have never heard back from him and was curoius if it was still at your house or gone, gone, gone. Just wondering, I know you a third party, so.......

12-05-2003, 06:34 PM	#1
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	1970 GMC Shortbed for sale I only have a few pictures at work. I will take more and email them if anyone is interested. 1970 GMC C-10 2WD Shortbed w/6cyl 3spd on flr It is very straight w/limited rust. One spot on each door and one rocker. It does have a sunroof, does not leak. Runs, but not strong. I was going to put a Vortec 5.3 in this thing, but may sell to finance my racecar operation. :p Considering $1800 obo Last edited by Charlie Coleman; 12-08-2003 at 01:26 PM.

12-08-2003, 01:25 PM	#6
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	top

12-08-2003, 07:47 PM	#8
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	David, It's still in my pasture. I don't know his long term plans. I know he has been extremely busy. I doubt he will have time to take it down for a VIN verification to title it until next year. It doesn't run, so it isn't easy to load. To be honest, for what he is selling it for, I don't know if it's really worth the effort. He'd be better off parting it out. I haven't talked to him in awhile about it though. I told him he could store it until my house sells. At the rate it's been going.....it could be there another year! Hope all is well.

12-08-2003, 07:49 PM	#9
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	If no one is interested in the truck as a whole, I may part. The bed and tail gate are straight and rust free. Good fenders, hood, Chrome grill. Cab only has the one bad rocker. Althought it does have a sunroof. Doors have the rust pictured. Coil springs No options on truck Any interest if parted?

12-08-2003, 07:56 PM	#10
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	68 LWb Thanks for the info, Iam leaving for the middle east for a year or more. Maybe it will still be around when I return, sure needed it for parts. Have a good one. Dave

12-09-2003, 12:22 PM	#11
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	ttt

12-10-2003, 12:09 AM	#12
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Charlie I would be interested in the box. Could you email some pictures of the floor, tailgate and sides please? Thanks Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

12-10-2003, 12:11 AM	#13
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,664	Hey Charlie This is the guy that brought the 4x4 frame to dallas a few months ago for your friend in denver. Tell him to give me a call if you see him again. He has not returned my calls. Thanks Steve

12-10-2003, 11:31 AM	#14
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	Hotfun, I will take pics, but it maybe this weekend before I get a chance. It's dark when I leave for work, and dark when I get home. I meant to take lots of pics last weekend, but I ended up laying in bed sick all weekend. STP67-72, I will let Jesse know your looking for him. He doesn't spend time on the board anymore. How would you like for him to contact you?

12-10-2003, 11:37 AM	#15
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Charlie I have been working the same long hours this week also. Please email them to me at mstastka@neb.rr.com when you have time. Thanks. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"



Register or Log In To remove these advertisements.

12-10-2003, 12:39 PM	#16
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	truck Sent you a pm. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

12-15-2003, 05:28 PM	#17
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	Don't want to part this truck...it's too nice. Offers? Will post parts prices next.

Register or Log In To remove these advertisements.