Military 15x8 wheels on 63 short wide - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mikeandson · 12-06-2013, 03:57 PM

I was wondering if anyone could give me a quick answer on a wheel question.

Looking at possibly going with a set of 15x8 cucc-v wheels on my 63 short wide. I cut a coil in front and TJ springs in the back.

Does anyone know if I will have any interference problems with this set up? Running factory drums.

Thanks.

Mike

boucher racing · 12-06-2013, 07:30 PM

They are the same backspacing as the 6 lug rally's. I have seem many C10's run them up front, so they should work.

Count your lucky stars, because getting your hands on a set of those is RARE! I have a pair on the back of my 66. The hardcore C10'ers will notice a 3 nub, 6 lug steel wheel and ask you where in the heck did you get them!

Mount em and show em off. Would love to see them.

What size tire are you going to run? With what you are planning to drop it, 235/75R15 or comparable height would look nice and proportionate.

**60-66** · 12-06-2013, 08:19 PM

These wheels ?

boucher racing · 12-06-2013, 08:22 PM

Quote:

Originally Posted by 60-66

These wheels ?

Yes, that is!

**60-66** · 12-06-2013, 08:45 PM

Well, my 66 GMC Carryall above is 2 1/2 inch drop spindles and one inch lower coils. 235 75 15 radials and no issues

12-06-2013, 03:57 PM	#1
mikeandson Registered User Join Date: Aug 2013 Location: Lafayette, LA Posts: 33	Military 15x8 wheels on 63 short wide I was wondering if anyone could give me a quick answer on a wheel question. Looking at possibly going with a set of 15x8 cucc-v wheels on my 63 short wide. I cut a coil in front and TJ springs in the back. Does anyone know if I will have any interference problems with this set up? Running factory drums. Thanks. Mike

12-06-2013, 07:30 PM	#2
boucher racing Registered User Join Date: Feb 2009 Location: Nashville TN Posts: 294	Re: Military 15x8 wheels on 63 short wide They are the same backspacing as the 6 lug rally's. I have seem many C10's run them up front, so they should work. Count your lucky stars, because getting your hands on a set of those is RARE! I have a pair on the back of my 66. The hardcore C10'ers will notice a 3 nub, 6 lug steel wheel and ask you where in the heck did you get them! Mount em and show em off. Would love to see them. What size tire are you going to run? With what you are planning to drop it, 235/75R15 or comparable height would look nice and proportionate. __________________ Build Threads: "JED" 66 GMC C1000 http://inliners.org/ubbthreads/ubbth...1857#Post61857 "Cropwell" 66 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=587639

12-06-2013, 08:19 PM	#3
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,328	Re: Military 15x8 wheels on 63 short wide These wheels ? __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

12-06-2013, 08:45 PM	#5
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,328	Re: Military 15x8 wheels on 63 short wide Well, my 66 GMC Carryall above is 2 1/2 inch drop spindles and one inch lower coils. 235 75 15 radials and no issues __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.