67 LWB stepside bed parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lefty&Son · 12-15-2003, 08:37 PM

Guys,

I need virtually all sheetmetal bed parts for a 67 GMC, and have been looking everywhere (I think). It seems that new sheetmetal for stepsides is rare.

My question - do I keep looking? Do I change to a fleetside bed, since they seem to me more readily available? Do I scour the Earth for an old rust free bed and pay huge shipping to East Coast (MA)?

Any ideas/thoughts on this would be welcomed.

Thanks,
Lefty

**Classic Heartbeat** · 12-15-2003, 09:47 PM

I would say that it depends on what the overall condition of the bed that you have is in. What does it need? Fenders and bedsides can be purchased new (reproductions) for your truck. All you would need is to weld the side barker light holes up in the fenders. This would not be cheap by any stretch of the imagination though, because just about everything for that bed is truck freight and then not even made by the same manufacturer. I would also consider what look you like most. Stepside? or Fleetside? If you like the fleetside, then start looking for one. (I have a nice 67 long fleetside bed here for $400.00, but shipping wouldn't be cheap.) The best advise I could give you is not to get in a hurry trying to locate the parts, unless you are on some sort of time schedule, or don't mind paying large shipping cost. This bed I have here for example would probably cost $600.00 or so to ship. However if you got time on your side someone that is not too far away from you just might come up with what you need cheap. WES www.ClassicHeartbeat.com

**old Rusty C10** · 12-15-2003, 09:57 PM

Im told the boxes are pretty well the same save the step fenders from 67-87 that should help ya some in additionif ya find something thats south of you i would truck soemthing for you cheaper than a carrier may ill go as far south as NC for ya

Dusti · 12-15-2003, 11:28 PM

Good luck finding the parts,I just found a 68 for sale with a long stepside bed ,the only good bed parts are the bed sides,but that is what I need,the fenders and steps were all beat up so was the front panel.
I have been looking for about 1 year to find some good bedsides.the top rails on my bed are beat up very bad.

I did get some good rust free 67 fenders last week so the parts are out there you might have to wait a while till you find them.

I bought my steps off e-bay,they were in perfect shape,no rust or dents

You can use fenders off 67-72,the 67s are hard to find since they only made them 1 year without the side marker lights

Keep it a stepside,stepsides rule

dinnut · 12-16-2003, 12:35 AM

i saw a fender for a step for 75 at a swapmeet. really nice one too! it had the step for a shor step

Lefty&Son · 12-16-2003, 03:52 PM

Wes, Old Rusty C10, and Dusti,

Thanks for your opinions and suggestions, especially Rusty for the trucking offer.

I think I'm learning to wait for the right part, instead of rushing, but man do I want to drive this thing

I'll keep waiting and saving up my shipping charge fund.

Happy Holidays!
Lefty

**Classic Heartbeat** · 12-16-2003, 04:14 PM

Here is that bed that I have. WES www.ClassicHeartbeat.com

**Classic Heartbeat** · 12-16-2003, 04:15 PM

There isn't any cancer rust in it at all.

**Classic Heartbeat** · 12-16-2003, 04:16 PM

Wood bed bottom could use replaced.

walker · 12-16-2003, 11:52 PM

Might try TEEITUP, he seems to have a thousand parts for sale.

12-15-2003, 08:37 PM	#1
Lefty&Son Registered User Join Date: Oct 2003 Location: Devens, MA Posts: 21	67 LWB stepside bed parts Guys, I need virtually all sheetmetal bed parts for a 67 GMC, and have been looking everywhere (I think). It seems that new sheetmetal for stepsides is rare. My question - do I keep looking? Do I change to a fleetside bed, since they seem to me more readily available? Do I scour the Earth for an old rust free bed and pay huge shipping to East Coast (MA)? Any ideas/thoughts on this would be welcomed. Thanks, Lefty __________________ - Working on and swearing at a 1967 GMC Stepside Longbed

12-15-2003, 09:47 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	I would say that it depends on what the overall condition of the bed that you have is in. What does it need? Fenders and bedsides can be purchased new (reproductions) for your truck. All you would need is to weld the side barker light holes up in the fenders. This would not be cheap by any stretch of the imagination though, because just about everything for that bed is truck freight and then not even made by the same manufacturer. I would also consider what look you like most. Stepside? or Fleetside? If you like the fleetside, then start looking for one. (I have a nice 67 long fleetside bed here for $400.00, but shipping wouldn't be cheap.) The best advise I could give you is not to get in a hurry trying to locate the parts, unless you are on some sort of time schedule, or don't mind paying large shipping cost. This bed I have here for example would probably cost $600.00 or so to ship. However if you got time on your side someone that is not too far away from you just might come up with what you need cheap. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

12-15-2003, 09:57 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,283	Im told the boxes are pretty well the same save the step fenders from 67-87 that should help ya some in additionif ya find something thats south of you i would truck soemthing for you cheaper than a carrier may ill go as far south as NC for ya __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-15-2003, 11:28 PM	#4
Dusti Not Dusti,just Bob Join Date: Jul 2002 Location: Camas,Wa Posts: 247	Long stepside parts Good luck finding the parts,I just found a 68 for sale with a long stepside bed ,the only good bed parts are the bed sides,but that is what I need,the fenders and steps were all beat up so was the front panel. I have been looking for about 1 year to find some good bedsides.the top rails on my bed are beat up very bad. I did get some good rust free 67 fenders last week so the parts are out there you might have to wait a while till you find them. I bought my steps off e-bay,they were in perfect shape,no rust or dents You can use fenders off 67-72,the 67s are hard to find since they only made them 1 year without the side marker lights Keep it a stepside,stepsides rule __________________ 72 cheyenne super 1/2ton 89 camaro

12-16-2003, 12:35 AM	#5
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	i saw a fender for a step for 75 at a swapmeet. really nice one too! it had the step for a shor step __________________ 70 longbed 496/th400/Ford 9"

12-16-2003, 03:52 PM	#6
Lefty&Son Registered User Join Date: Oct 2003 Location: Devens, MA Posts: 21	Thanks for the feedback guys Wes, Old Rusty C10, and Dusti, Thanks for your opinions and suggestions, especially Rusty for the trucking offer. I think I'm learning to wait for the right part, instead of rushing, but man do I want to drive this thing I'll keep waiting and saving up my shipping charge fund. Happy Holidays! Lefty __________________ - Working on and swearing at a 1967 GMC Stepside Longbed

12-16-2003, 04:14 PM	#7
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Here is that bed that I have. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 07:11 PM.

12-16-2003, 04:15 PM	#8
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	There isn't any cancer rust in it at all. __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 07:11 PM.

12-16-2003, 04:16 PM	#9
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Wood bed bottom could use replaced. __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 07:11 PM.

12-16-2003, 11:52 PM	#10
walker Registered User Join Date: Jul 2003 Location: north of Phx AZ about 30 miles Posts: 698	Might try TEEITUP, he seems to have a thousand parts for sale. __________________ Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.