Buddy Bucket Seats - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'72_GMC · 03-07-2011, 05:33 PM

**N2TRUX** · 03-07-2011, 05:39 PM

Quote:

Originally Posted by '72_GMC

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**Hart_Rod** · 03-07-2011, 07:18 PM

Quote:

Originally Posted by leddzepp

the center will flop over backwards. not practical for a suburban...which is why they only came in trucks.
Posted via Mobile Device

Not so fast my friend! They DID come in Burbs but the center console didn't have a back to it (the flip up part),

, just the bottom tray and seat cushion. The factory truck ones can be modified pretty easily to keep the seat back from flopping over. Check out my burb build and there should be pictures of how to do it.

R/

**leddzepp** · 03-07-2011, 07:27 PM

Quote:

Originally Posted by Hart_Rod

Not so fast my friend! They DID come in Burbs but the center console didn't have a back to it (the flip up part),

, just the bottom tray and seat cushion. The factory truck ones can be modified pretty easily to keep the seat back from flopping over. Check out my burb build and there should be pictures of how to do it.

R/

cool. i figured if they did come with them there wouldnt have been a back.
Posted via Mobile Device

'72_GMC · 03-07-2011, 07:38 PM

Quote:

Originally Posted by Hart_Rod

Not so fast my friend! They DID come in Burbs but the center console didn't have a back to it (the flip up part),

, just the bottom tray and seat cushion. The factory truck ones can be modified pretty easily to keep the seat back from flopping over. Check out my burb build and there should be pictures of how to do it.

R/

Man, that is one awesome looking Burb, WoW, My eyes however must have been distracted by all the awesome looking gear because I couldn't find any detail about your seats? I can imagine just cutting that back part off, but exactly where would certainly be a help.

**Hart_Rod** · 03-07-2011, 07:40 PM

Quote:

Originally Posted by leddzepp

cool. i figured if they did come with them there wouldnt have been a back.
Posted via Mobile Device

Here's some pictures I have saved:

**Hart_Rod** · 03-07-2011, 07:52 PM

Quote:

Originally Posted by '72_GMC

Man, that is one awesome looking Burb, WoW, My eyes however must have been distracted by all the awesome looking gear because I couldn't find any detail about your seats? I can imagine just cutting that back part off, but exactly where would certainly be a help.

I didn't cut it off. I welded some plates on the back for re-enforcement and then made some brackets so the back flips up so the seat can be used. Not great pictures, but I think you get the point.

'72_GMC · 03-07-2011, 08:57 PM

Hey, those photos are Awesome, I like the open back program, That is awesome, I guess there is enough seats in that truck without making another one center front. I wonder where I could get those burb hinges?

**Hart_Rod** · 03-07-2011, 11:01 PM

Quote:

Originally Posted by '72_GMC

Hey, those photos are Awesome, I like the open back program, That is awesome, I guess there is enough seats in that truck without making another one center front. I wonder where I could get those burb hinges?

Burb buddy's are pretty rare, but I'm sure you could make something similar.

Joemomma1 · 04-01-2011, 02:24 PM

I heard there are repos of these, is this true?
Posted via Mobile Device

JR68 · 07-20-2011, 04:51 PM

Hi do you have any buddy seats available

m6z · 07-20-2011, 05:35 PM

Quote:

Originally Posted by Joemomma1

I heard there are repos of these, is this true?
Posted via Mobile Device

I've never seen them. Anyone else?

LOCOMOTION · 09-10-2011, 10:26 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

LOCOMOTION · 11-06-2011, 10:43 AM

C/10 King · 11-06-2011, 11:02 AM

Sorry all out at the moment, check back in Jan.

dracko · 11-06-2011, 11:26 AM

So after searching high and low since I got my truck, I finally snagged a set of buddy buckets. They're nasty looking seats, even after I cleaned off the coating of dog hair and spider eggs, but for $75 I just couldn't pass them up.

They look like Dodge BB's I think...maybe out of a Warlock??

I am definitely gonna get new foam/covers for them, but not really sure what route to take. I've seen on ebay you can get chevy foams for decent prices, but I don't know if the chevy foam will fit these seats. Anybody ever done that?

I am also a bit concerned about this metal back bracing.

Its rusted bad, but i'm not sure if its a structural part of the seat frame, or just part of the foam setup. It had foam over it, but if anybody has some experience with these seats, any advice appreciated.

thanks.

C/10 King · 11-06-2011, 02:05 PM

Looks like dodge's to me.

Still a great deal for 75 bucks.

kieth · 11-06-2011, 02:10 PM

Just saw these on Craigslist:

http://tulsa.craigslist.org/pts/2684330576.html

dracko · 11-06-2011, 06:54 PM

Quote:

Just saw these on Craigslist:

http://tulsa.craigslist.org/pts/2684330576.html

Nice find! Up here in Saskatchewan they're rarer than hens teeth. Only pair I've seen are the ones I snapped up.

Jedi · 02-18-2012, 12:01 AM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

dojo · 02-18-2012, 01:37 AM

I just got a set of Procar Low buckets from Summit. Great quality, great seat. Price was right also. The bracket to convert bench to Buckets was a quality piece also, all for around 5 bills .

DrekD · 12-16-2013, 06:43 AM

I am not sure the right place for this question. I bought what I was told was a buddy bucket seat from a 1968 CST. I was told that it had been modified over the years. Well, I am in the process of cleaning it up. I would like to get the frame back to original. I have enclosed pictures. Did these actually come from a 68 CST or something else. Does anyone have a good picture of what right looks like? I may need some help with a few measurements too, once we decide to start fabricating.

Its the first seat I had seen in a while, so I figure its a starting point.

03-07-2011, 05:33 PM	#26
'72_GMC Registered User Join Date: Aug 2008 Location: Graham, WA Posts: 54	Re: Buddy Bucket Seats Last edited by N2TRUX; 03-07-2011 at 05:39 PM.

03-07-2011, 08:57 PM	#33
'72_GMC Registered User Join Date: Aug 2008 Location: Graham, WA Posts: 54	Re: Buddy Bucket Seats Hey, those photos are Awesome, I like the open back program, That is awesome, I guess there is enough seats in that truck without making another one center front. I wonder where I could get those burb hinges?

04-01-2011, 02:24 PM	#35
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: Buddy Bucket Seats I heard there are repos of these, is this true? Posted via Mobile Device

07-20-2011, 04:51 PM	#36
JR68 Registered User Join Date: Jun 2011 Location: Las Vegas, NV Posts: 12	Re: Buddy Bucket Seats Hi do you have any buddy seats available

09-10-2011, 10:26 PM	#38
LOCOMOTION Registered User Join Date: Jun 2011 Location: BRIGHTON CO Posts: 5	Re: Buddy Bucket Seats Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by leddzepp; 09-10-2011 at 11:05 PM.

11-06-2011, 10:43 AM	#39
LOCOMOTION Registered User Join Date: Jun 2011 Location: BRIGHTON CO Posts: 5	Re: Buddy Bucket Seats Last edited by N2TRUX; 11-06-2011 at 11:32 AM.

11-06-2011, 11:02 AM	#40
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Buddy Bucket Seats Sorry all out at the moment, check back in Jan. __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

11-06-2011, 11:26 AM	#41
dracko Registered User Join Date: Jan 2010 Location: Regina, SK Posts: 809	Re: Buddy Bucket Seats So after searching high and low since I got my truck, I finally snagged a set of buddy buckets. They're nasty looking seats, even after I cleaned off the coating of dog hair and spider eggs, but for $75 I just couldn't pass them up. They look like Dodge BB's I think...maybe out of a Warlock?? I am definitely gonna get new foam/covers for them, but not really sure what route to take. I've seen on ebay you can get chevy foams for decent prices, but I don't know if the chevy foam will fit these seats. Anybody ever done that? I am also a bit concerned about this metal back bracing. Its rusted bad, but i'm not sure if its a structural part of the seat frame, or just part of the foam setup. It had foam over it, but if anybody has some experience with these seats, any advice appreciated. thanks.

11-06-2011, 02:05 PM	#42
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Buddy Bucket Seats Looks like dodge's to me. Still a great deal for 75 bucks. __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

11-06-2011, 02:10 PM	#43
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: Buddy Bucket Seats Just saw these on Craigslist: http://tulsa.craigslist.org/pts/2684330576.html

02-18-2012, 12:01 AM	#45
Jedi Registered User Join Date: Feb 2012 Location: Turlock, Ca Posts: 7	Re: Buddy Bucket Seats Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by leddzepp; 02-18-2012 at 12:03 AM. Reason: WTB non subscriber

02-18-2012, 01:37 AM	#46
dojo Registered User Join Date: May 2010 Location: Bakersfield, California Posts: 88	Re: Buddy Bucket Seats I just got a set of Procar Low buckets from Summit. Great quality, great seat. Price was right also. The bracket to convert bench to Buckets was a quality piece also, all for around 5 bills .

12-16-2013, 06:43 AM	#47
DrekD Registered User Join Date: Dec 2013 Location: Fayetteville, NC Posts: 1	Re: Buddy Bucket Seats I am not sure the right place for this question. I bought what I was told was a buddy bucket seat from a 1968 CST. I was told that it had been modified over the years. Well, I am in the process of cleaning it up. I would like to get the frame back to original. I have enclosed pictures. Did these actually come from a 68 CST or something else. Does anyone have a good picture of what right looks like? I may need some help with a few measurements too, once we decide to start fabricating. Its the first seat I had seen in a while, so I figure its a starting point. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.