|
12-19-2013, 08:29 PM
|
#1 |
|
Registered User
Join Date: Apr 2013
Location: jacksonville fl
Posts: 26
|
66c10 350 and a m22
I have a 4 speed m22. And the linkage is hitting the header coming off the z bar it has long tubes not sure the brand of headers The z bar hooks up fine but the linage that comes off the bottom of the z bar hits the header going to the the clutch fork any pics or info would help thanks
|
|
|
|
12-20-2013, 01:21 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: 66c10 350 and a m22
Is it the end of the rod that goes from the arm on the bellcrank to the fork that is hitting the header tube? If so just trim it off.
A pic or two of what you have would help.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
12-20-2013, 01:19 PM
|
#3 |
|
Registered User
Join Date: Dec 2012
Location: Bismarck, ND
Posts: 31
|
Re: 66c10 350 and a m22
I had an issue also. I dont remember exactly where I was hitting but I had to cut off and reweld one of the arms on the Z bar. I think I had to bend on the arm also. It has been a few years and did not take pics, sorry.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
