|
12-17-2003, 04:44 PM
|
#1 |
|
Registered User
Join Date: Jan 2002
Location: WATAUGA,TX
Posts: 675
|
Cutting the Frame
Anybody ever cut a hole in their frame with a hole saw. I need to cut some holes through a cross member for exhaust and thought I would try a hole saw first. I only need to cut two holes and was wondering if one one of those bi-metal ones from Lowes or Home Depot would work. Wasnt sure how hard the frame is.
__________________
72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA |
|
|
|
12-17-2003, 04:55 PM
|
#2 |
|
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
A bi-metal blade should cut right through it.
|
|
|
|
|
12-17-2003, 05:02 PM
|
#3 |
|
Registered User
 
Join Date: Sep 2003
Location: DFW
Posts: 765
|
slow speed and dont force it you will burn the bit, If you can, find some cutting (lube) spray for it, it helps to lube and cool the blade.
__________________
The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself? |
|
|
|
|
12-17-2003, 05:14 PM
|
#4 |
|
Registered User
Join Date: Jan 2002
Location: WATAUGA,TX
Posts: 675
|
Thanks guys, I will go ahead and get one and try that. Using a torch anywhere near those gas lines makes me nervous.
__________________
72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA |
|
|
|
|
12-17-2003, 05:49 PM
|
#5 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
not a problem i've used them to cut thru 1/4inch steel, like stated slow and easy use something to lube it and cool the blade oil/wd-40 will work
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
12-18-2003, 12:13 AM
|
#6 |
|
Senior Member
Join Date: Apr 2000
Location: Orlando, FL
Posts: 1,076
|
Also grab a hold of the drill REAL TIGHT. The bigger the hole saw the more it will want to break your wrists.
__________________
............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements. |
|
|
|
|
12-18-2003, 01:44 AM
|
#7 |
|
Registered User
Join Date: Sep 2003
Location: DFW
Posts: 765
|
yes and dont put your apendages inbetween the drill and any metal because it will smack the bejeepers out of your apendages
__________________
The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself? |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
