need left side Lower control arm, speedo cable. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 12-18-2003, 02:27 AM

81-87 , 2WD. Need left side(driver) Lower control arm, NO scaly rust or damage from bottoming out ( already have one of those). and also a speedo cable that has not been fried on the exhaust.( already have one of those too!) Geez this guy was a butcher. also need the little piece that both of the e-brake cables coming up from the rear brakes hook to has to be from 83 or older. I think it was 84 when they went to the different E-brake set up.

send price with shipping to 08070 to all4trux@snip.net .thanx , DAVE

CT-Truckster · 12-18-2003, 09:07 PM

I got a 87 suburban 6.2L deisel i been sorta parting out. I can't remeber what kind of tranny it had in it(it was gone when i got it)
But if you like I'll check and see if the cable is still there and see if you can use it. just let me know if your still needing one. Oh, it's got a lower control arm on it too, bu the only thing is it would be the week after christmas before I got time to take off the control arm.

**crossy** · 12-18-2003, 09:15 PM

that time frame is fine email me at home address.

12-18-2003, 02:27 AM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	need left side Lower control arm, speedo cable. 81-87 , 2WD. Need left side(driver) Lower control arm, NO scaly rust or damage from bottoming out ( already have one of those). and also a speedo cable that has not been fried on the exhaust.( already have one of those too!) Geez this guy was a butcher. also need the little piece that both of the e-brake cables coming up from the rear brakes hook to has to be from 83 or older. I think it was 84 when they went to the different E-brake set up. send price with shipping to 08070 to all4trux@snip.net .thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

12-18-2003, 09:15 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	that time frame is fine email me at home address. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

12-18-2003, 09:07 PM	#2
CT-Truckster ? Join Date: Jul 2002 Location: Dyersburg, TN Posts: 471	I got a 87 suburban 6.2L deisel i been sorta parting out. I can't remeber what kind of tranny it had in it(it was gone when i got it) But if you like I'll check and see if the cable is still there and see if you can use it. just let me know if your still needing one. Oh, it's got a lower control arm on it too, bu the only thing is it would be the week after christmas before I got time to take off the control arm.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.