Where can I buy an optic sensor harness and other harnesses under the intake for the

[jrsavoie]

I got new batteries today. I knew that wasn't the issue but they dropped blow 12 volts when cranking. They were 6 years old and Farm & Fleet had them on sale for $79.99 84 month, 850 cca. I would rather have had the Sears Diehards with 930 CCA, but couldn't justify 3X the money.

I am not getting any fuel to the injectors.

I tried to start with the Crank position sensor unhooked

I checked the pins on the cable That comes from the engine and feeds the PMD
Pin A had 1.65 to 1.75 volts while cranking
Pin E had 0 volts
Pin C had continuity to ground - .02 ohms or so
Pins B & F had no continuity

Any ideas?