NC WTB driveshaft for 67 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Littletony · 01-04-2014, 08:24 PM

I am looking for a driveshaft for a 67 swb. My truck has the three speed manual trans with the pg spline output shaft.

68 SHORT-STEP'N · 01-05-2014, 07:32 PM

I have one on a 68 swb , 3 on the floor . Should be the same .

Littletony · 01-05-2014, 07:34 PM

Is there anyway you could measure it for me? Also how much do you want for it?

mahanian · 01-05-2014, 08:12 PM

I have a 1 piece and 2 piece off SWB's, they were behind a TH400, not sure if they are the correct length for a PG. What length do you need?

Littletony · 01-05-2014, 08:30 PM

The manual trans in my truck is shorter then the 400. But it looks like I need a shaft around 63" or so from u joint to u joint.

68 SHORT-STEP'N · 01-05-2014, 08:35 PM

Quote:

Originally Posted by Littletony

Is there anyway you could measure it for me? Also how much do you want for it?

I can do it tomorrow , raining & freezing here right now

Littletony · 01-05-2014, 08:43 PM

Thank you sir, when ever you have time.

68 SHORT-STEP'N · 01-06-2014, 05:16 PM

Mine is a 2 piece about 63"" long

Littletony · 01-06-2014, 08:26 PM

How much are you asking for it?

68 SHORT-STEP'N · 01-06-2014, 08:57 PM

I can do $100.00 + shipping

Littletony · 01-06-2014, 09:17 PM

How much do you think shipping will be? Can you post up some pictures of it?

68 SHORT-STEP'N · 01-06-2014, 10:39 PM

$25.00 for shipping . This is the only pic I have right now , I can get better ones tomorrow .

68 SHORT-STEP'N · 01-10-2014, 12:11 AM

Pics

Littletony · 01-11-2014, 02:41 AM

Short stepn I found one right down the road from me today. Thank you for the offer and I am sorry if I wasted any of your time sir.

01-04-2014, 08:24 PM	#1
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	WTB driveshaft for 67 C10 I am looking for a driveshaft for a 67 swb. My truck has the three speed manual trans with the pg spline output shaft. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-05-2014, 07:32 PM	#2
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 I have one on a 68 swb , 3 on the floor . Should be the same . __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-05-2014, 07:34 PM	#3
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 Is there anyway you could measure it for me? Also how much do you want for it? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-05-2014, 08:12 PM	#4
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: WTB driveshaft for 67 C10 I have a 1 piece and 2 piece off SWB's, they were behind a TH400, not sure if they are the correct length for a PG. What length do you need? __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

01-05-2014, 08:30 PM	#5
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 The manual trans in my truck is shorter then the 400. But it looks like I need a shaft around 63" or so from u joint to u joint. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-05-2014, 08:43 PM	#7
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 Thank you sir, when ever you have time. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-06-2014, 05:16 PM	#8
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 Mine is a 2 piece about 63"" long __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-06-2014, 08:26 PM	#9
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 How much are you asking for it? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-06-2014, 08:57 PM	#10
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 I can do $100.00 + shipping __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-06-2014, 09:17 PM	#11
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 How much do you think shipping will be? Can you post up some pictures of it? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-06-2014, 10:39 PM	#12
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 $25.00 for shipping . This is the only pic I have right now , I can get better ones tomorrow . Attached Images __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-10-2014, 12:11 AM	#13
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 Pics Attached Images __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-11-2014, 02:41 AM	#14
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 Short stepn I found one right down the road from me today. Thank you for the offer and I am sorry if I wasted any of your time sir. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945



Register or Log In To remove these advertisements.