CORRECT engine bays?

[StoningtonQB]

I'm trying to get my bay back to original. This won't be a tough project because I think the only thing I need to find is an original air cleaner. This should do a decent job of masking the fact that I have an Edelbrock manifold and carb. I cannot find an example anywhere! I know that there should be a sticker that says "Keep your GM all GM" on the side of the air cleaner, but is there supposed to be a sticker on the top of it as well (for example, 350 turbo fire)? I have a 350 ad it's a 1970 model.


Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located*here*If you need any further assistance with that please contact any*Admin*for help.

[Steve Hafner]

. . . .

Here is a link to a thread I started that should help.

http://67-72chevytrucks.com/vboard/s...d.php?t=549556

[StoningtonQB]

Originally Posted by Steve Hafner

. . . .

Here is a link to a thread I started that should help.

http://67-72chevytrucks.com/vboard/s...d.php?t=549556

Thanks, this has been helpful. There aren't too many restored bays out there that are correct. Mine won't be with my carb and manifold but the air cleaner can hide it.

[myyamr7]

Originally Posted by StoningtonQB

Thanks, this has been helpful. There aren't too many restored bays out there that are correct. Mine won't be with my carb and manifold but the air cleaner can hide it.

The original air cleaner won't hide to much, as it sits high when using the original stove that goes between the filter and the carb.



Here's mine before I touched anything