|
01-23-2014, 11:46 AM
|
#1 |
|
Senior Member
 
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
carrier bearing
Has anybody used the Billet Carrier bearing availabe from Brothers, it looks strong,
but I have seen where the urethane has cracked and not lasted in other suspension parts.
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks 
|
|
|
|
01-23-2014, 03:26 PM
|
#2 |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: carrier bearing
Its a great way to spend $250 fixing a $80 problem.
A factory style carrier bearing on a properly ballanced driveshaft can last 40 years. |
|
|
|
|
01-23-2014, 03:58 PM
|
#3 |
|
Senior Member
Join Date: Feb 2010
Location: Falls City, Nebraska "100 Miles From Nowhere"
Posts: 2,219
|
Re: carrier bearing
I just installed a flexplate on my 72 lwb. While I had the old girl up jack stands I could clearly see the $12 dollar factory carrier bearing I installed 4 years ago was still tight and shiny new looking! Only the bolts had rusted...
__________________
Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American" 
|
|
|
|
|
01-23-2014, 04:37 PM
|
#4 |
|
Senior Member
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: carrier bearing
that is all i need to hear, thanks guys
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks
|
|
|
|
|
01-23-2014, 04:54 PM
|
#5 |
|
Senior Member
Join Date: Feb 2010
Location: Falls City, Nebraska "100 Miles From Nowhere"
Posts: 2,219
|
Re: carrier bearing
__________________
Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"
|
|
|
|
|
01-24-2014, 02:56 AM
|
#6 |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: carrier bearing
If yours needs to be replaced I recomend just taking it to a driveline shop. They know the other wonky issues with these 2 piece drivelines and it will need to be reballanced even if the only thing changed was the carrier bearing.
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
